INTERRUP.

Interrupt List Release 61 Last change 16jul00
Copyright (c) 1989-1999,2000 Ralf Brown

Index for interrupt INT 6F

6F - INT 6F - Novell NetWare - PCOX API (3270 PC terminal interface)

INT 6F - Novell NetWare - PCOX API (3270 PC terminal interface)
	AX = function
	    0000h enter terminal mode
		Return: AX = status
			    0000h no action requested
			    0001h screen save
	    0001h reset interface and set configuration parameters
		DX = bitfields
		    bits 2-0: model number
		    bits 4-3: I/O address
		    bits 6-5: DMA channel
		Return: nothing
	    0002h set display parameters
		DX = bitfields
		    bits 1-0: OIA mode
		    bits 4-2: monitor support
		Return: nothing
	    0003h read status
		Return: AX = status word (see #03738)
	    0004h read cursor position
		Return: AX = cursor position
	    0005h get character from device buffer
		DX = cursor position
		Return: AH = type (00h data, 01h attribute)
			AL = data or attribute character
	    0006h send character
		DH = type (00h ASCII, 01h extended code)
		DL = ASCII character or extended code
		Return: nothing
	    0007h set timeout
		DX = timeout in seconds
		Return: nothing
	    0008h wait for location to be modified
		DX = cursor position
		Return: AX = status (0000h modified, nonzero timeout)
	    0009h NOP
	    000Ah restore display
		Return: nothing
	    000Bh update device buffer
		Return: AX = cursor positoin
	    000Ch write string to add information area
		DS:DX -> string
		Return: nothing
	    000Dh maintenance operations
		DX = maintenance operation code
		Return: AX = operation status
	    000Eh get control program version
		Return: AH = release number (major version)
			AL = level number (minor version)
	    000Fh get microcode version
		Return: AH = release number (major version)
			AL = level number (minor version)
	    0010h save or display graphics
		BX = length of data buffer
		CX = subfunction request code
		DS:DX -> data buffer
		Return: AX = return code
			CX = length of PIF data
	    0011h perform structured field operation
		CX = request number
		DS:DX -> parameter list
		Return: AX = status word (see #03738)
			CX = error number
	    0012h set cursor position for direct write buffer
		DX = new cursor position
		Return: AX = status word (see #03738)
	    0013h write direct to buffer
		DL = character to be written
		DH = translation option
		Return: AX = status word (see #03738)
	    0014h write direct to buffer without echo
		DL = character to be written
		DH = translation option
		Return: AX = status word (see #03738)
	    0015h set direct write string length
		DX = string value
		Return: nothing
	    0016h write string direct to buffer
		DS:DX -> string
		Return: AX = status word (see #03738)
	    0017h write string direct to buffer, untranslated
		DS:DX -> string
		Return: AX = status word (see #03738)
	    0018h get direct-write cursor position
		Return: AX = cursor position
	    0019h convert row/column to cursor position
		DH = display row (1-43)
		DL = display column (1-132)
		Return: AX = cursor position
	    001Ah convert cursor position to row/column
		DX = cursor position
		Return: AH = display row
			AL = display column
	    001Bh find next field
		DX = initial cursor position
		Return: AX = field cursor position
	    001Ch find previous field
		DX = initial cursor position
		Return: AX = field cursor position
	    001Dh find next unprotected field
		DX = initial cursor position
		Return: AX = field cursor position
	    001Eh find previous unprotected field
		DX = initial cursor position
		Return: AX = field cursor position
	    001Fh find next protected field
		DX = initial cursor position
		Return: AX = field cursor position
	    0020h find previous protected field
		DX = initial cursor position
		Return: AX = field cursor position
	    0021h masked search forward
		DH = mask
		DL = search pattern
		Return: AX = cursor position or 0000h
	    0022h masked search backward
		DH = mask
		DL = search pattern
		Return: AX = cursor position or 0FFFh
	    0023h find field length
		DX = cursor position
		Return: AX = field length
	    0024h read field
		DS:DX -> buffer for field contents
		Return: AX = status word (see #03738)
	    0025h read screen
		DS:DX -> buffer for screen contents
		Return: AX = status word (see #03738)
	    0026h read buffer untranslated
		DX = cursor position
		Return: AX = buffer code
			CX:BX -> 3278/79 device buffer image
	    0027h enable/disable keyboard
		DL = new state of keyboard breaks (00h enabled, 01h disabled)
		Return: nothing
	    0028h select host session
		DL = session short name
		Return: AX = session information
	    0029h retrieve host session name
		AX = short name (DFT) or 0000h (not available, CUT mode)
	    002Ah get current device buffer size
		Return: AX = device buffer size
			CX = segment of EAB
	    002Bh arm modified location trigger
		DX = cursor position
		Return: AX = status (0000h not available, 0001h successful)

Bitfields for PCOX status word:
Bit(s)	Description	(Table 03738)
 0,1	cursor type
 2	cursor inhibited
 3	display inhibited
 4	feature step inhibited
 5	480-character format code
 6,7	unused
 8-10	model number (2-5)
 11	unit has been reset by controller (cleared after status returned)
 12	buffer has been written into (cleared after status returned)
 13	alarm has been sounded (cleared after status returned)
 14-15	monitor type (01 mono, 10 color, 11 hybrid)

Top

6F00 - INT 6F - 10NET - LOGIN

INT 6F - 10NET - LOGIN
	AH = 00h
	DS:DX -> login record (see #03739)
Return: CL = security level
	AX = status (see #03740)
SeeAlso: AH=01h,AH=80h,INT 21/AX=4402h"10MEMMGR"

Format of 10NET login record:
Offset	Size	Description	(Table 03739)
 00h  8 BYTEs	user name
 08h  8 BYTEs	password
 10h 12 BYTEs	name of SuperStation

(Table 03740)
Values for 10NET status:
 0000h	successful
 01FFh	"RTO_NERR" transmit interrupt lost (time out on response)
 02FFh	"NET_NERR" network (hardware) error
 03FFh	"PAS_NERR" invalid password
 04FFh	"LRN_NERR" local resource not available
 05FFh	"SRN_NERR" server resource not available
 06FFh	"LNM_NERR" already logged in under different name
 07FFh	"LSF_NERR" login security failure (node)
 08FFh	"NLI_NERR" not logged in
 09FFh	"DIVZ_NERR" position calc error
 0AFFh	"NT1_NERR" receive subfunction not = send subfunction (i.e. read,write)
 0BFFh	"RFNC_NERR" request function not in range
 0CFFh	"NSFH_NERR" no more server file handle entries left
 0DFFh	"NFTAB_NERR" no more shared file table entries left
 0EFFh	"NUFH_NERR" no more user file handle entries left
 0FFFh	"CHAT_NERR" chat permit not on
 10FFh	"NSRV_NERR" not a server on request
 11FFh	"NOBD_NERR" no transporter board error
 12FFh	"STO_NERR" time out on send
 13FFh	"INF_NERR" item not found (spool item not on queue)
 14FFh	"DACS_NERR" DOS access incompatible
 15FFh	"RLOCK_NERR" record already locked
 16FFh	"IVP_NERR" invalid parameter
 17FFh	"RLTO_NERR" record lock time out error
 18FFh	"CSPL_NERR" currently spooling to named device
 19FFh	"DRP_NERR" dropped receive message (throttle)
 1AFFh	"SOPV_NERR" open sharing violation
 1BFFh	"NTUF_NERR" no more tuf entries left
 1CFFh	"NOWN_NERR" not file owner on open
 1DFFh	"RSEC_NERR" read security not passed
 1EFFh	"WSEC_NERR" write security not passed
 1FFFh	"GSEC_NERR" group security not passed
 20FFh	"SEC1_NERR" security file failure
 21FFh	"ACT1_NERR" activity file failure
 22FFh	"SPL1_NERR" spool control file failure
 23FFh	"NMT_NERR" device not mounted (spooling)
 24FFh	"RSPL_NERR" spool file has not been terminated
 25FFh	"DNSH_NERR" device not mounted or is not being shared
 26FFh	"DUP_NERR" duplicate node ID
 27FFh	"FNF_NERR" file not found error
 28FFh	"NMF_NERR" no more files
 29FFh	"UN_NERR" unknown internal system error
 2AFFh	"QCP_NERR" print queue is full or corrupted
 2BFFh	"IFNC_NERR" invalid function
 2CFFh	"IVH_NERR" invalid handle
 2DFFh	"TOF_NERR" too many files opened
 2EFFh	"PNF_NERR" path not found
 2FFFh	"SACT_NERR" named file is active
---10NET v5.0+ ---
 30FFh	"NAK_NERR" received NAK on send (destination out of buffers)
 31FFh	"RENT_NERR" reentrancy in driver F_SEND
 32FFh	"RECV_NERR" driver could not be put in receive mode
 33FFh	"NRLT_NERR" no more RLTAB entries left
 34FFh	"DIAL_NERR" function requires an unsupported dialect
 35FFh	"IVD_NERR" invalid device
 36FFh	"NALV_NERR" netname access level violated
 37FFh	"NPIDNF_NERR" network path not found
 38FFh	"SP_NERR" server is paused
 39FFh	"TMNM_NERR" too many remote user names
 3AFFh	"DUPD_NERR" duplicate network device
 3BFFh	"DIU_NERR" shared device in use, can't delete
 3CFFh	"NNWD_NERR" network name was deleted
 3DFFh	"NPFS_NERR" not enough space for print file
 3EFFh	"NNNF_NERR" network name not found (can't find the call name)
 3FFFh	"NB_NERR" network busy
 40FFh	"NDNLE_NERR" network device no longer exists
 41FFh	"NBCLE_NERR" NetBIOS command limit exceeded
 42FFh	"FINT24_NERR" Fail on INT 24h
 43FFh	"PEXP_NERR" password expired
 44FFh	"NPUP_NERR" new password error
 45FFh	"MAXS_NERR" maximum allowed disk space exceeded
 46FFh	"TDOW_NERR" time-of-day/day-of-week error
SeeAlso: #03767
Index:	error codes;10Net|10Net;error codes

Top

6F00 - INT 6F - HP Vectra EX-BIOS - "F_ISR" (internal) - RESPOND TO LOGICAL ISR

INT 6F - HP Vectra EX-BIOS - "F_ISR" (internal) - RESPOND TO LOGICAL ISR
	AH = 00h
	BP = ID for driver (see #03741)
	DH = data type (see #03742)
	DL = physical device driver's index (driver ID / 6)
	BX,CX = data
	ES:0000h -> physical device's Describe Record (see #03749)
	---keypress event data---
	    BH = keyboard state (only if bit 5 of DH set) (see #03743)
	    BL = scancode (if bit 4 of DH clear)
	    CX = number of scancodes in list (if bit 4 of DH set)
	    ES:SI -> scancode list (if bit 4 of DH set)
	---motion event data---
	    BX = new X position (abs device) or X increment (relative device)
	    CX = new Y position (abs device) or Y increment (relative device)
	---button event data
	    BL = button information
		bits 15-8 reserved
		bit 7: button state (0 = down, 1 = up)
		bits 6-0: button number (0-7)
	    BH = reserved
Return: AH = status (see #03744)
	BP,DS destroyed
	---if device is keyboard translator---
	    BL = translated scancode
	    BH = new keyboard state (if DH bit 5 set) (see #03743)
	    DH = new scancode type (see #03742)
Notes:	INT 6F corresponds to IRQ23 on the original HP Vectra AT, which is
	  unavailable because of its use as a BIOS extension software interrupt
	the INT 6F handler consists of an instruction to load DS with the
	  driver's data segment followed by an indexed far jump using BP to
	  select the destination vector; since the interrupt handler is
	  located immediately following the dispatch table, the HP_VECTOR_TABLE
	  may be found by looking at offset 0000h in the INT 6F segment, and
	  its size is equal to the offset of the interrupt handler
	each entry in the HP_VECTOR table consists of a DWORD for the driver's
	  entry point address and a WORD for the driver's data segment
	this function is not user-callable, as it is a response to a physical
	  event, and assumes that the caller has already handled the physical
	  interrupt and updated the Describe Record (see #03749) to reflect
	  the event
SeeAlso: INT 6C"HP Vectra",INT 6F/AX=0200h"HP Vectra"

(Table 03741)
Values for HP Vectra EX-BIOS driver ID:
 0000h	V_SCOPY (null driver, but DS value points at system copyright string)
 0006h	V_DOLITTLE (null driver)
 000Ch	V_PNULL (null driver)
 0012h	V_SYSTEM
 0018h	reserved
 001Eh	V_S8259
 0024h	reserved
 002Ah	V_SINPUT
 0030h	reserved
 0036h	V_QWERTY (keyboard translator)
 003Ch	V_SOFTKEY (keyboard translator)
 0042h	V_FUNCTION (keyboard translator)
 0048h	V_NUMPAD (keyboard translator)
 004Eh	V_CCP (keyboard translator)
 0054h	V_SVIDEO
 005Ah	V_STRACK
 0060h	V_EVENT_TOUCH
 0066h	V_EVENT_TABLET
 006Ch	V_EVENT_POINTER
 0072h	reserved
 0078h	reserved
 007Eh	reserved
 0084h	reserved
 008Ah	V_CCPCUR (keyboard translator)
 0090h	V_RAW (keyboard translator)
 0096h	V_CCPNUM (keyboard translator)
 009Ch	V_OFF (keyboard translator)
 00A2h	V_CCPGID (translator: cursor control pad keys to GID data)
 00A8h	V_SKEY2FKEY (keyboard translator)
 00AEh	V_8041
 00B4h	V_PGID_CCP
 00BAh	C_LTABLET
 00C0h	V_LPOINTER (pointing device: mouse, etc.)
 00C6h	V_LTOUCH (touch screen)
 00CCh	V_LHPMOUSE
 00D2h	???
 ...
 0102h	???
 0108h	V_LNULL
 010Eh	reserved
 0114h	V_HPHIL
 011Ah-01C2h reserved
 016Eh	V_SCANDOOR (scancode management chip driver) (ES/QS/RS only)
 01C8h-0228h available

(Table 03742)
Values for HP Vectra EX-BIOS ISR data type:
 00h	reserved "T_KC_R0"
 01h	reserved "T_KC_R1"
 02h	ASCII data
 03h	reserved "T_KC_R3"
 04h	HP150 keyboard (ITF) scancode
 05h	reserved "T_KC_R5"
 06h	device-definable type
 07h	HP Vectra keyboard set
 08h	IBM AT scancode set
 09h	button data
 0Ah	IBM PC scancode set
 0Bh	Softkey keypad (F1-F8)
 0Ch	function key keypad (F1-F10)
 0Dh	HP Cursor Control Pad keypad
 0Eh	Qwerty keypad
 0Fh	Numeric keypad
 1xh	bit 4 set: string of CX scancode of type 0xh at ES:SI
 2xh	bit 5 set: BH contains current keyboard state
 40h	signed 8-bit relative data
 41h	signed 16-bit relative data
 42h	unsigned 8-bit absolute data
 43h	unsigned 16-bit absolute data
 45h	specially-formed data (80x25) generated by V_LTOUCH
 46h	specially-formed data (640x200) generated by V_LTABLET
 47h	specially-formed data (640x200) generated by V_LPOINTER

Bitfields for HP Vectra EX-BIOS keyboard state:
Bit(s)	Description	(Table 03743)
 0	Alt pressed
 1	Left Shift pressed
 2	Right Shift pressed
 3	Ctrl pressed
 4	CapsLock active
 5	NumLock active
 6	Right unlabeled key pressed (some international keyboards)
 7	Left unlabeled key pressed (some international keyboards)
SeeAlso: #00582

(Table 03744)
Values for HP Vectra EX-BIOS status:
 00h	successful
 02h	unsupported function
 04h	not serviced
 06h	done (no further processing should be performed on the ISR event)
 F2h	device is out of paper
 F4h	device is offline
 F6h	no more space for more drivers
 F8h	driver is busy
 FAh	bad parameter
 FEh	operation failed
Note:	status codes are always even; negative values (>= 80h) indicate errors
	  while positive values indicate exceptional conditions

Format of HP EX-BIOS driver header data:
Offset	Size	Description	(Table 03745)
 00h	WORD	driver attributes (see #03746)
 02h	WORD	string index of driver's name
 04h	WORD	driver's default logical device vector (see #03741)
 06h	WORD	driver's parent class (bitset) (see #03747)
 08h	WORD	driver's child class (bitset)
 0Ah	WORD	driver's parent vector
 0Ch	WORD	driver's child vector
 0Eh	BYTE	major subaddress
 0Fh	BYTE	minor subaddress
Notes:	this structure is located at offset 0 in the driver's data segment,
	  which in turn may be read from the HP_VECTOR_TABLE (refer to note in
	  main entry)
	only the first WORD is required, and everything from offset 6 onward
	  is only required if the device wishes to perform device mapping
SeeAlso: #03748,#03749

Bitfields for HP EX-BIOS driver header attributes:
Bit(s)	Description	(Table 03746)
 15	this is a complete driver header
 14	"ATR_DEVCFG" reserved
 13	driver can be mapped with the parent vector at offset 0Ah
 12	driver can be mapped with the child vector at offset 0Ch
 11-9	driver type
	000 reserved vector
	001 free vector
	010 EX-BIOS service
	011 logical driver (mapped from parent to child)
	100 mappable driver (cannot be last in driver chain)
	101 mappable driver that is last in driver chain
	110 input driver (mappable)
	111 reserved
 8	"ATR_STRING" reserved
 7	call SF_START whenever driver is remapped
 6-5	addressing requirements
	00 no subaddresses required
	01 requires major address be stored at offset 0Eh
	10 requires minor address be stored at offset 0Fh
	11 required major,minor, and mid addresses (minor in low nybble of
	      offset 0Fh, mid address in high nybble of 0Fh)
 4	driver can be shared between several parent drivers
 3	driver can be shared between several child drivers
 2	this driver header is in ROM
 1	"ATR_YIELD" reserved
 0	reserved
SeeAlso: #03745,#03747

Bitfields for HP EX-BIOS driver class:
Bit(s)	Description	(Table 03747)
 15	maps F1 to F8 softkeys
 14	keyboard
 13	cursor pad
 12	console device
 11	serial output device (may be capable of limited input)
 10	"CL_COMM" reserved
 9	interfaces multiple resources transparent to operating system
 8	serial output device filter (can be mapped between logical and physical
	  driver to perform translations)
 7	addressed block device
 6	priority boot device
 5	logical graphics input device
 4	physical graphics input device (can map to child of another driver)
 3	"CL_GID" can map to an event
 2	physical touch device
 1	reserved
 0	class extension bit
Note:	special values: FFFFh maps to all other devices (V_PNULL), and 0000h
	  maps to no other driver
SeeAlso: #03745

Format of HP EX-BIOS global data area:
Offset	Size	Description	(Table 03748)
 00h 20 BYTEs	reserved
 14h	BYTE	sound driver status
 15h	BYTE	number of pending key clicks (max 4) (see AH=34h/BP=0012h)
 16h	BYTE	current tick duration scaling factor
 17h	BYTE	current key click volume
 18h	WORD	current beep period (10 us increments) (see AH=3Ch/BP=0012h)
 1Ah	WORD	current beep duration (10 us increments)
 1Ch	BYTE	number of pending beep functions (max 4) (see AH=3Ah/BP=0012h)
 1Dh	BYTE	reserved
 1Eh	WORD	next unused string index number
 20h	...	reserved
SeeAlso: #03745

Format of HP EX-BIOS Driver Describe Record:
Offset	Size	Description	(Table 03749)
 00h 16 BYTEs	EX-BIOS driver header data (see #03745)
 10h	BYTE	device GID type
		bits 7-4: device type
		bits 3-0: physical device link address
 11h	BYTE	physical device ID (see #03751)
 12h	WORD	logical device status bits (see #03750)
 14h	BYTE	physical device vector number (driver ID / 6)
 15h	BYTE	maximum number of axes reported (0-2)
 16h	BYTE	device class
		bits 7-4: current class
		bits 3-0: default class
 17h	BYTE	number of buttons/prompts
		bits 7-4: number of prompts
		bits 3-0: number of buttons
 18h	BYTE	reserved
 19h	BYTE	(physical devices only) maximum output burst length
 1Ah	BYTE	(physical devices only) number of write registers
 1Bh	BYTE	(physical devices only) number of read registers
 1Ch	BYTE	button transition flags (bit 0 = button0, etc.)
 1Dh	BYTE	current button states (bit 0 = button0, etc.)
 1Eh	WORD	device resolution
 20h	WORD	maximum x-axis count
 22h	WORD	maximum y-axis count
 24h	WORD	X position data for absolute devices
 26h	WORD	Y position data for absolute devices
 28h	WORD	X delta for relative devices
 2Ah	WORD	Y delta for relative devices
 2Ch	WORD	(logical devices only) X-axis scaling accumulator
		(fraction of one logical unit)
 2Eh	WORD	(logical devices only) Y-axis scaling accumulator
		(fraction of one logical unit)

Bitfields for HP logical device status flags:
Bit(s)	Description	(Table 03750)
 15-5	reserved
 4	event enabled
 3	tracking enabled
 2	clipping enabled
 1	button error occurred
 0	interrupt in progress
SeeAlso: #03749

(Table 03751)
Values for HP-HIL device ID:
 00h-02h reserved
 03h	Swiss-French keyboard
 04h-06h reserved
 07h	Canadian-English keyboard
 08h-0Ah reserved
 0Bh	Italian keyboard
 0Ch	reserved
 0Dh	Dutch keyboard
 0Eh	Swedish keyboard
 0Fh	German keyboard
 10h-12h reserved
 13h	Spanish keyboard
 14h	reserved
 15h	Belgian (Flemish) keyboard
 16h	Finnish keyboard
 17h	UK keyboard
 18h	French-Canadian keyboard
 19h	Swiss-German keyboard
 1Ah	Nerwegian keyboard
 1Bh	Frensh keyboard
 1Ch	Danish keyboard
 1Dh	Katakana keyboard
 1Eh	Latin American-Spanish keyboard
 1Fh	US-American keyboard
 20h-2Bh reserved
 2Ch-2Fh tone generator
 30h-3Fh reserved
 40h-5Bh reserved (character entry)
 5Ch-5Fh barcode reader
 60h-67h reserved (relative positions)
 68h-6Bh mouse
 6Ch-6Fh trackball
 70h-7Fh reserved (relative positions)
 80h-87h reserved (absolute positions)
 88h-8Bh touchpad
 8Ch-8Fh touch screen
 90h-97h graphics tablet
 98h-9Fh reserved (absolute positions)
 A0h-BFh compressed keyboard (91-93 keys)
 C0h-DFh extended keyboard (107-109 keys)
 E0h-FFh standard keyboard (85-87 keys)

Top

6F01 - INT 6F - 10NET - LOGOFF

INT 6F - 10NET - LOGOFF
	AH = 01h
	DS:DX -> superstation ID or nulls (12 bytes)
Return: CX = number of files closed
	AX = status (see also #03740)
	    08FFh superstation ID not already logged in
SeeAlso: AH=00h"10NET",AH=81h

Top

6F02 - INT 6F - 10NET - STATUS OF NODE

INT 6F - 10NET - STATUS OF NODE
	AH = 02h
	DS:DX -> 512-byte status record (see #03753)
Return: CF clear if successful
	CF set on error
	    AX = error code (see #03740)
SeeAlso: INT 21/AX=5E01h"10NET"

(Table 03752)
Values for 10NET station type:
 00h	workstation
 01h	superstation
 02h	gateway station
 03h	gateway active
 04h	logged into multiple superstations
 05h	reserved

Format of 10NET node status record:
Offset	Size	Description	(Table 03753)
 00h  8 BYTEs	user name (0 if none)
 08h	BYTE	station type (see #03752)
 09h 24 BYTEs	list of superstations logged into more than one superstation
 21h 12 BYTEs	node ID
 2Dh	WORD	message count for this station (send for user node, receive for
		  superstations)
---for superstations only---
 2Fh	WORD	drives allocated (bit 0=A:, bit 1=B:,...)
 31h	BYTE	user service flags (see #03754)
 32h	BYTE	printers allocated (bit 0=LPT1,...)
 33h	BYTE	number of unprinted spool files
 34h	BYTE	number of opened files
 35h	BYTE	number of logged on nodes
 36h	BYTE	primary drive (1=A:)
 37h	BYTE	reserved
 38h  N BYTEs	list of logged on node IDs (each 12 bytes, max 37 IDs)
1F4h  3 BYTEs	time: sec/min/hrs
1F7h  3 BYTEs	date: day/mon/year-1980

Bitfields for 10NET user service flags:
Bit(s)	Description	(Table 03754)
 7	gate
 6	print permit on
 4	SUBMIT is on
 3	mail waiting for node
 2	calendar waiting for you
 1	news waiting for you
 0	mail waiting for you

Top

6F0200 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_INIT" - START INITIALIZING DRIVER

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_INIT" - START INITIALIZING DRIVER
	AX = 0200h
	BP = driver ID (see #03741)
	BX = "last-used DS" value from HP global data area (see #03748)
Return: AH = status (see #03744)
	BX = new "last-used DS" value
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0202h,AH=0Ch"F_INS_FIXOWNDS"

Top

6F0202 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_START" - COMPLETE DRIVER INITIALIZ.

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_START" - COMPLETE DRIVER INITIALIZ.
	AX = 0202h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0204h"HP Vectra"

Top

6F0204 - INT 6F C - MS Windows 3.0 - DOS APPLICATION SWITCH HOOK

INT 6F C - MS Windows 3.0 - DOS APPLICATION SWITCH HOOK
	AX = 0204h
Return: AX = status
	    0000h switch is allowed
	    other switch not allowed
Note:	intercepting this call will allow a DOS application to ensure that
	  Windows will not switch away from it.

Top

6F0204 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_REPORT_STATE" - GET DRIVER STATE

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_REPORT_STATE" - GET DRIVER STATE
	AX = 0204h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	DX = device state from Logical Describe Record (see #03749,#03755)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0206h"HP Vectra"

Bitfields for HP Vectra V_HPHIL driver state:
Bit(s)	Description	(Table 03755)
 0	link configuration in progress
 1	reserved
 2	no devices attached
 3	general failure
 4,5	reserved
 6	HP-HIL driver open
 7	reserved
 8	link has been reconfigured
 9	error during output request
 10	reserved
 11	output request complete
 12	timeout
 13-15	reserved

Top

6F0206 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_VERSION_DESC" - GET DRIVER VERSION

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_VERSION_DESC" - GET DRIVER VERSION
	AX = 0206h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BX = driver release date code
	    (BL = BCD years since 1960, BH = BCD week number within year)
	CX = length of version string
	ES:DI -> version string
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0204h"HP Vectra",AX=0208h

Top

6F0208 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_DEF_ATTR" - RESET TO DEFAULT ATTR

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_DEF_ATTR" - RESET TO DEFAULT ATTR
	AX = 0208h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=020Ah,AX=020Ch

Top

6F020A - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_GET_ATTR" - GET CURRENT ATTRIBUTES

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_GET_ATTR" - GET CURRENT ATTRIBUTES
	AX = 020Ah
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BX,CX = current attributes
	BP,DS destroyed
	---for V_LTOUCH, V_LPOINTER---
	    BX = logical width
	    CX = logical height
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=020Ch

Top

6F020C - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_SET_ATTR" - SET DEVICE ATTRIBUTES

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_SET_ATTR" - SET DEVICE ATTRIBUTES
	AX = 020Ch
	BP = driver ID (see #03741)
	BX,CX = new attributes
	---for V_LTOUCH, V_LPOINTER---
	    BX = new logical width
	    CX = new logical height
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=020Ah

Top

6F020E - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_OPEN" - RESERVE DRIVER FOR ACCESS

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_OPEN" - RESERVE DRIVER FOR ACCESS
	AX = 020Eh
	BP = driver ID (see #03741) for V_HPHIL, others
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	place device in open state, which allows output to the device
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=0210h

Top

6F0210 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_CLOSE" - RELEASE DRIVER

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_CLOSE" - RELEASE DRIVER
	AX = 0210h
	BP = driver ID (see #03741) for V_HPHIL, others
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	place device in closed state, which disallows output to the device
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=020Eh

Top

6F0212 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_TIMEOUT" - REPORT REQUESTED TIMEOUT

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_TIMEOUT" - REPORT REQUESTED TIMEOUT
	AX = 0212h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	report to driver that a previously-requested timeout interval has
	  expired
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=020Eh,AX=0214h,AX=0216h

Top

6F0214 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_INTERVAL" - 60 HZ INTERVAL EXPIRED

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_INTERVAL" - 60 HZ INTERVAL EXPIRED
	AX = 0214h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	report to driver that a previously-requested 60 Hz interval has
	  expired
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=020Eh,AX=0212h,AX=0216h

Top

6F0216 - INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_TEST" - PERFORM HARDWARE TEST

INT 6F - HP Vectra EX-BIOS - "F_SYSTEM SF_TEST" - PERFORM HARDWARE TEST
	AX = 0216h
	BP = driver ID (see #03741)
Return: AH = status (see #03744)
	BP,DS destroyed
	---on failure---
	CX = length of reason string
	ES:DI -> string describing error
SeeAlso: AH=00h"HP Vectra",AX=0200h,AX=0208h,AX=020Eh,AX=0212h,AX=0214h

Top

6F03 - INT 6F - 10NET - GET ADDRESS OF CONFIGURATION TABLE

INT 6F - 10NET - GET ADDRESS OF CONFIGURATION TABLE
	AH = 03h
	DS:DI -> node ID (optional)
Return: ES:BX -> configuration table (see #03756)
SeeAlso: AH=13h,INT 21/AX=5E01h"10NET"

Format of 10NET configuration table:
Offset	Size	Description	(Table 03756)
-41	WORD	local device table address
-39	WORD	extended network error mapping table address
-37	WORD	shared device table address
-35	WORD	mounted device table address
-33	BYTE	receive buffer counter
-32	BYTE	collect buffer counter
-31	WORD	TUF address
-29	BYTE	enable flag
-28	BYTE	FCB keep flag
-27	WORD	reserved
---up to here, 10NET v3.3---
-25	WORD	count of dropped Send6F
-23	WORD	buffer start address
-21	WORD	comm driver base address
-19	WORD	send/receive retry count
-17	BYTE	number of 550ms loops before timeout
-16	WORD	UFH address
-14	WORD	CDIR address
-12	WORD	LTAB address
-10	WORD	SFH address
-8	WORD	FTAB address
-6	WORD	RLTAB address
-4	WORD	SMI address
-2	WORD	NTAB address
 00h	WORD	address of first CT_DRV
 02h	BYTE	number of DRV entries
 03h  8 BYTEs	login name
 0Bh 12 BYTEs	node ID (blank-padded)
 17h  6 BYTEs	node address
 1Dh	BYTE	flag
 1Eh	BYTE	CT_CFLG (chat permit)
		bit 1: sound bell
		bit 0: CHAT permit
 1Fh	BYTE	CT_PSFLG (see #03757)
 20h	BYTE	in 10Net flag
 21h	WORD	receive message count
 23h	WORD	send message count
 25h	WORD	retry count
 27h	WORD	failed count
 29h	WORD	driver errors
 2Bh	WORD	dropped responses/CHATs
 2Dh  9 BYTEs	LIST ID/NTAB address (3 entries--LPT1-3)
 36h  6 BYTEs	AUX ID/NTAB address (2 entries--COM1-2)
 3Ch	BYTE	active CB channel
 3Dh	BYTE	received 6F messages on queue
 3Eh  9 BYTEs	activity counters for channels 1-9
---beyond here, 10NET v3.3---
 47h	BYTE	bit 0: RS232 gate
		bit 1: Send6F gate (user set)
 48h	DWORD	pointer into gate (user set)
 4Ch	DWORD	pointer into 10Net send
 50h  N WORDs	addresses of timer blocks

Bitfields for CT_PSFLG:
Bit(s)	Description	(Table 03757)
 5	PRINT permit
 4	KB initiated
 3	CHAT called FOXPTRM
 2	SUBMIT active
 1	SUBMIT received
 0	SUBMIT permit

Top

6F04 - INT 6F - 10NET - SEND

INT 6F - 10NET - SEND
	AH = 04h
	DS:BX -> send record (see #03758)
	DS:DX -> data (max 1024 bytes)
Return: CF clear if successful
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AH=05h"10NET",AH=09h"10NET",AH=0Ah"10NET"

Format of 10NET send record:
Offset	Size	Description	(Table 03758)
 00h 12 BYTEs	receiving node's ID
		if first byte has high-order bit set, message is directed to
		  the CT_RGATE vector at the receiver
		if second byte is 00h, first byte is taken as a CB
		  channel number and delivered to all nodes on same channel
 0Ch	WORD	 length of data at DX

Top

6F04--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_BASEHPVT" - GET HP_VECTOR_TABLE ADDRESS

INT 6F - HP Vectra EX-BIOS - "F_INS_BASEHPVT" - GET HP_VECTOR_TABLE ADDRESS
	AH = 04h
	BP = 0012h (driver ID for V_SYSTEM)
Return: AH = status (see #03744)
	ES = segment of HP_VECTOR_TABLE (see also AH=00h"HP Vectra")
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=06h"F_INS_XCHGFIX",AH=08h"F_INS_XCHGRSVD"

Top

6F04--BP005A - INT 6F - HP Vectra EX-BIOS - "F_TRACK_INIT" - RESET TRACKING DRIVER TO DEFAULTS

INT 6F - HP Vectra EX-BIOS - "F_TRACK_INIT" - RESET TRACKING DRIVER TO DEFAULTS
	AH = 04h
	BP = 005Ah (driver ID for V_STRACK)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=06h"F_TRACK_ON",AH=08h"F_TRACK_OFF"
SeeAlso: AH=0Ah"F_DEF_MASKS",AH=0Ch"F_SET_LIMITS_X"

Top

6F0400 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_LOCK" - RESERVE SUB-ADDRESSES

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_LOCK" - RESERVE SUB-ADDRESSES
	AX = 0400h
	BP = driver ID (see #03741)
	DH,DL = major,minor address (optional)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	reserve specified sub-addresses on an already-allocated driver for
	  exclusive access
Note:	this function is documented as present but unsupported in the drivers
	  V_LTABLET, V_LPOINTER, and V_LTOUCH
SeeAlso: AX=0200h"HP Vectra",AX=0402h"SF_UNLOCK"

Top

6F0400BP001E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABLE_SVC" - UNMASK 8041 SVC INT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABLE_SVC" - UNMASK 8041 SVC INT
	AX = 0400h
	BP = 001Eh (driver ID for V_S8259)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0402h"SF_DISABLE_SVC",AX=0404h"SF_ENABLE_KBD"
SeeAlso: AX=0408h"SF_ENABLE_HPHIL"

Top

6F0400BP002A - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DEF_LINKS" - SET DEFAULT PARENTS

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DEF_LINKS" - SET DEFAULT PARENTS
	AX = 0400h
	BP = 002Ah (driver ID for V_SINPUT)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	set the parent vectors in the physical device driver headers to their
	  system defaults
SeeAlso: AH=00h"HP Vectra",AX=0402h/BP=002Ah,AX=0404h/BP=002Ah
SeeAlso: AH=06h"F_INQUIRE"

Top

6F0400BP0054 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_ID_HP" - INSTALLATION CHECK

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_ID_HP" - INSTALLATION CHECK
	AX = 0400h
	BP = 0054h (driver ID for V_SVIDEO)
	???
Return: AH = status (see #03744)
	BX = 4850h ('BP')
	BP,DS destroyed
	???
Note:	only partially documented
SeeAlso: AX=0402h/BP=0054h,AX=0404h/BP=0054h,AX=0406h/BP=0054h
SeeAlso: AX=0408h/BP=0054h,AX=040Ah/BP=0054h

Top

6F0400BP00CC - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_MOUSE_COM" - INIT INT 33 HANDLER

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_MOUSE_COM" - INIT INT 33 HANDLER
	AX = 0400h
	BP = 00CCh (driver ID for V_LHPMOUSE)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0402h/BP=00CCh

Top

6F0402 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_UNLOCK" - RELEASE SUB-ADDRESSES

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_UNLOCK" - RELEASE SUB-ADDRESSES
	AX = 0402h
	BP = driver ID (see #03741)
	DH,DL = major,minor address (optional)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	release specified sub-addresses from exclusive access
Note:	this function is documented as present but unsupported in the drivers
	  V_LTABLET, V_LPOINTER, and VLTOUCH
SeeAlso: AX=0200h"HP Vectra",AX=0400h"SF_LOCK"

Top

6F0402BP001E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISABLE_SVC" - MASK 8041 SVC INT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISABLE_SVC" - MASK 8041 SVC INT
	AX = 0402h
	BP = 001Eh (driver ID for V_S8259)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=001Eh,AX=0406h/BP=001Eh
SeeAlso: AX=040Ah/BP=001Eh

Top

6F0402BP002A - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_GET_LINKS" - GET DRIVER LINK FIELDS

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_GET_LINKS" - GET DRIVER LINK FIELDS
	AX = 0402h
	BP = 002Ah (driver ID for V_SINPUT)
	ES:SI -> buffer for link table (see #03759)
Return: AH = status (see #03744)
	ES:SI buffer filled
	BP,DS destroyed
Desc:	get the parent and child vectors for the seven supported physical
	  device drivers
SeeAlso: AH=00h"HP Vectra",AX=0400h"SF_DEF_LINKS",AX=0404h"SF_SET_LINKS"
SeeAlso: AH=06h"F_INQUIRE"

Format of HP Vectra EX-BIOS driver link table:
Offset	Size	Description	(Table 03759)
 00h	BYTE	vector number of HP-HIL device #1's child
 01h	BYTE	vector number of HP-HIL device #1's parent
	...
 0Ch	BYTE	vector number of HP-HIL device #7's child
 0Dh	BYTE	vector number of HP-HIL device #7's parent

Top

6F0402BP0054 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_GET_INFO" - GET DISPLAY INFO

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_GET_INFO" - GET DISPLAY INFO
	AX = 0402h
	BP = 0054h (driver ID for V_SVIDEO)
	???
Return: AH = status (see #03744)
	BP,DS destroyed
	???
Note:	only partially documented
SeeAlso: AX=0400h/BP=0054h,AX=0404h/BP=0054h,AX=0406h/BP=0054h
SeeAlso: AX=0408h/BP=0054h,AX=040Ah/BP=0054h

Top

6F0402BP00CC - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_MOUSE_COM" - FORCE INT 33 INIT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_MOUSE_COM" - FORCE INT 33 INIT
	AX = 0402h
	BP = 00CCh (driver ID for V_LHPMOUSE)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	set up INT 33 even if no mouse is installed
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=00CCh

Top

6F0404 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_TRACK_ON" - GRAPHICS CURSOR ON

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_TRACK_ON" - GRAPHICS CURSOR ON
	AX = 0404h
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	enables graphics cursor tracking of the logical device's movement
SeeAlso: AH=00h"HP Vectra",AX=0400h"SF_LOCK",AX=0406h"SF_TRACK_OFF"

Top

6F0404BP001E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABLE_KBD" - UNMASK 8041 OBF INT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABLE_KBD" - UNMASK 8041 OBF INT
	AX = 0404h
	BP = 001Eh (driver ID for V_S8259)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0400h"SF_ENABLE_SVC",AX=0406h"SF_DISABLE_KBD"
SeeAlso: AX=0408h"SF_ENABLE_HPHIL"

Top

6F0404BP002A - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_SET_LINKS" - SET DRIVER LINK FIELDS

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_SET_LINKS" - SET DRIVER LINK FIELDS
	AX = 0404h
	BP = 002Ah (driver ID for V_SINPUT)
	ES:SI -> buffer containing link table (see #03759)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	specify the parent and child vectors for the seven supported physical
	  device drivers
SeeAlso: AH=00h"HP Vectra",AX=0400h"SF_DEF_LINKS",AX=0402h"SF_GET_LINKS"
SeeAlso: AH=06h"F_INQUIRE"

Top

6F0404BP0054 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_SET_INFO" - SET EXT-CTRL INFO

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_SET_INFO" - SET EXT-CTRL INFO
	AX = 0404h
	BP = 0054h (driver ID for V_SVIDEO)
	???
Return: AH = status (see #03744)
	BP,DS destroyed
	???
Note:	only partially documented
SeeAlso: AX=0400h/BP=0054h,AX=0402h/BP=0054h,AX=0406h/BP=0054h
SeeAlso: AX=0408h/BP=0054h,AX=040Ah/BP=0054h

Top

6F0406 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_TRACK_OFF" - GRAPHICS CURSOR OFF

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_TRACK_OFF" - GRAPHICS CURSOR OFF
	AX = 0406h
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	disables graphics cursor tracking of the logical device's movement
SeeAlso: AH=00h"HP Vectra",AX=0400h"SF_LOCK",AX=0404h"SF_TRACK_ON"
SeeAlso: AX=0408h"SF_CREATE_EVENT"

Top

6F0406BP001E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISABLE_KBD" - MASK 8041 OBF INT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISABLE_KBD" - MASK 8041 OBF INT
	AX = 0406h
	BP = 001Eh (driver ID for V_S8259)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0402h"SF_DISABLE_SVC",AX=0404h"SF_ENABLE_KBD"
SeeAlso: AX=040Ah"SF_DISABLE_HPHIL"

Top

6F0406BP0054 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_MOD_INFO" - SET EXT-CTRL REG

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_MOD_INFO" - SET EXT-CTRL REG
	AX = 0406h
	BP = 0054h (driver ID for V_SVIDEO)
	???
Return: AH = status (see #03744)
	BP,DS destroyed
	???
Note:	only partially documented
SeeAlso: AX=0400h/BP=0054h,AX=0402h/BP=0054h,AX=0404h/BP=0054h
SeeAlso: AX=0408h/BP=0054h,AX=040Ah/BP=0054h

Top

6F0406BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_RECONFIGURE" - RECONFIG LINK

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_RECONFIGURE" - RECONFIG LINK
	AX = 0406h
	BP = 0114h (driver ID for V_HPHIL)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=020Eh,AX=0408h"SF_CRV_WR_PROMPTS"
SeeAlso: AX=0410h"SF_CRV_SELF_TEST"

Top

6F0408 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CREATE_EVENT" - SET EVENT HANDLER

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CREATE_EVENT" - SET EVENT HANDLER
	AX = 0408h
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
	ES:SI -> new event handler (see AH=00h"HP Vectra")
	DX = new handler's DS
Return: AH = status (see #03744)
	ES:SI -> old event handler
	DX = old handler's DS
	BP,DS destroyed
Desc:	specify routine to be called on logical device events
Note:	when events occur, the event handler is called with the same registers
	  as the "F_ISR" function on AH=00h"HP Vectra"
SeeAlso: AH=00h"HP Vectra",AX=0400h"SF_LOCK",AX=0406h"SF_TRACK_OFF"
SeeAlso: AX=040Ah"SF_EVENT_ON",AX=040Ch"SF_EVENT_OFF",AH=06h"F_SAMPLE"

Top

6F0408BP001E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABLE_HPHIL" - UNMASK HP-HIL INT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABLE_HPHIL" - UNMASK HP-HIL INT
	AX = 0408h
	BP = 001Eh (driver ID for V_S8259)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=001Eh,AX=0404h/BP=001Eh
SeeAlso: AX=040Ah/BP=001Eh

Top

6F0408BP0054 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_GET_RES" - GET VIDMODE RESOLUTN

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_GET_RES" - GET VIDMODE RESOLUTN
	AX = 0408h
	BP = 0054h (driver ID for V_SVIDEO)
	???
Return: AH = status (see #03744)
	BP,DS destroyed
	???
Note:	only partially documented
SeeAlso: AX=0400h/BP=0054h,AX=0402h/BP=0054h,AX=0404h/BP=0054h
SeeAlso: AX=0406h/BP=0054h,AX=040Ah/BP=0054h

Top

6F0408BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_WR_PROMPTS" - WRITE PROMPT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_WR_PROMPTS" - WRITE PROMPT
	AX = 0408h
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	DL = prompt number
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=020Eh,AX=0406h/BP=0114h,AX=040Ah/BP=0114h

Bitfields for HP Vectra V_HPHIL device address indicator:
Bit(s)	Description	(Table 03760)
 15-14	reserved
 13	address in DH is valid (must be set, clear is reserved)
 12	valid value in DL
 11-0	reserved

Top

6F040A - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_EVENT_ON" - ENABLE EVENT HANDLER

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_EVENT_ON" - ENABLE EVENT HANDLER
	AX = 040Ah
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0408h"SF_CREATE_EVENT",AX=040Ch"SF_EVENT_OFF"
SeeAlso: AX=040Eh"SF_CLIPPING_ON"

Top

6F040ABP001E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISABLE_HPHIL" - MASK HP-HIL INT

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISABLE_HPHIL" - MASK HP-HIL INT
	AX = 040Ah
	BP = 001Eh (driver ID for V_S8259)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0402h/BP=001Eh,AX=0406h/BP=001Eh
SeeAlso: AX=0408h/BP=001Eh

Top

6F040ABP0054 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_SET_MODE" - SET VIDEO MODE

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_VID_SET_MODE" - SET VIDEO MODE
	AX = 040Ah
	BP = 0054h (driver ID for V_SVIDEO)
	???
Return: AH = status (see #03744)
	BP,DS destroyed
	???
Note:	only partially documented
SeeAlso: AX=0400h/BP=0054h,AX=0402h/BP=0054h,AX=0404h/BP=0054h
SeeAlso: AX=0406h/BP=0054h,AX=0408h/BP=0054h

Top

6F040ABP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CREATE_INTR" - CREATE INTERVAL ENTRY

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CREATE_INTR" - CREATE INTERVAL ENTRY
	AX = 040Ah
	BP = 00AEh (driver ID for V_8041)
	BH = vector number of driver to be called regularly (vector addr / 6)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	add a driver to the list (max eight) of drivers which will be called
	  by the HP's 8041 at 60 Hz
Note:	the newly added entry will not be called until enabled with
	  AX=040Eh/BP=00AEh
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=00AEh,AX=040Eh/BP=00AEh
SeeAlso: AX=0412h/BP=00AEh,AX=0416h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F040ABP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_WR_ACK" - ACKNOWLEDGE DEVICE

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_WR_ACK" - ACKNOWLEDGE DEVICE
	AX = 040Ah
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	DL = acknowledge number (specific if 01h-07h, generic otherwise)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0406h/BP=0114h,AX=040Ch/BP=0114h

Top

6F040C - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_EVENT_OFF" - DISABLE EVENT HANDLER

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_EVENT_OFF" - DISABLE EVENT HANDLER
	AX = 040Ch
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0408h"SF_CREATE_EVENT",AX=040Ah"SF_EVENT_ON"

Top

6F040CBP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DELET_INTR" - DELETE INTERVAL ENTRY

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DELET_INTR" - DELETE INTERVAL ENTRY
	AX = 040Ch
	BP = 00AEh (driver ID for V_8041)
	BH = vector number of driver to be removed (vector addr / 6)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	remove a driver to the list (max eight) of drivers which will be called
	  by the HP's 8041 at 60 Hz
SeeAlso: AH=00h"HP Vectra",AX=040Ah/BP=00AEh,AX=0410h/BP=00AEh
SeeAlso: AX=0412h/BP=00AEh,AX=0416h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F040CBP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_REPEAT" - SET KEY REPEAT RATE

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_REPEAT" - SET KEY REPEAT RATE
	AX = 040Ch
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	DL = repeat rate (00h = 30 Hz, 01h = 60 Hz)
Return: AH = status (see #03744)
	BP,DS destroyed
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=00h"HP Vectra",AX=040Ah/BP=0114h,AX=040Eh/BP=0114h

Top

6F040E - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLIPPING_ON" - ENABLE CLIPPING

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLIPPING_ON" - ENABLE CLIPPING
	AX = 040Eh
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	causes the physical device's motion to be clipped to prevent overflow
	  or underflow of the logical position
SeeAlso: AH=00h"HP Vectra",AX=040Ah"SF_EVENT_ON",AX=0410h"SF_CLIPPING_OFF"

Top

6F040EBP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABL_INTR" - START INTERRUPT SRVICE

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_ENABL_INTR" - START INTERRUPT SRVICE
	AX = 040Eh
	BP = 00AEh (driver ID for V_8041)
	BH = vector number of driver to be called regularly (vector addr / 6)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	enable 60 Hz calling of a driver previously added to the list of
	  drivers to be called by the HP's 8041
SeeAlso: AH=00h"HP Vectra",AX=040Ah/BP=00AEh,AX=0410h/BP=00AEh
SeeAlso: AX=0412h/BP=00AEh,AX=0416h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F040EBP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_DISABLE_REPEAT" - KEY REPT OFF

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_DISABLE_REPEAT" - KEY REPT OFF
	AX = 040Eh
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
Return: AH = status (see #03744)
	BP,DS destroyed
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=0114h,AX=0410h/BP=0114h
SeeAlso: AX=0416h/BP=0114h

Top

6F0410 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLIPPING_OFF" - DISABLE CLIPPING

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLIPPING_OFF" - DISABLE CLIPPING
	AX = 0410h
	BP = driver ID (see #03741) for V_LPOINTER, V_LTOUCH, V_LTABLET
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	disables clipping of the physical device's motion, which may cause
	  overflow or underflow of the logical position
SeeAlso: AH=00h"HP Vectra",AX=040Ah"SF_EVENT_ON",AX=040Eh"SF_CLIPPING_ON"

Top

6F0410BP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISBL_INTR" - END INTERRUPT SERVICE

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_DISBL_INTR" - END INTERRUPT SERVICE
	AX = 0410h
	BP = 00AEh (driver ID for V_8041)
	BH = vector number of driver (vector addr / 6)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	disable 60 Hz interval calls to the specified driver
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=00AEh,AX=040Eh/BP=00AEh
SeeAlso: AX=0412h/BP=00AEh,AX=0416h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F0410BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_SELF_TEST" - PERFORM SELFTEST

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_SELF_TEST" - PERFORM SELFTEST
	AX = 0410h
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	ES:SI -> buffer for result
Return: AH = status (see #03744)
	CX = number of bytes in buffer
	BP,DS destroyed
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=0114h,AX=0412h/BP=0114h

Top

6F0412BP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_SET_RAMSW" - SET RAM SWITCH IN 8041

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_SET_RAMSW" - SET RAM SWITCH IN 8041
	AX = 0412h
	BP = 00AEh (driver ID for V_8041)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	sets a flag in the 8041 indicating that a second 256K bank of RAM
	  on the motherboard is enabled
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=00AEh,AX=040Eh/BP=00AEh
SeeAlso: AX=0414h/BP=00AEh,AX=0416h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F0412BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_REPORT_STATUS" - GET DEVSTATUS

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_REPORT_STATUS" - GET DEVSTATUS
	AX = 0412h
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	ES:SI -> 15-byte buffer for status
Return: AH = status (see #03744)
	CX = number of bytes returned in buffer
	BP,DS destroyed
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=00h"HP Vectra",AX=0410h/BP=0114h,AX=0414h/BP=0114h

Top

6F0414BP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLR_RAMSW" - CLEAR 8041 RAM SWITCH

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLR_RAMSW" - CLEAR 8041 RAM SWITCH
	AX = 0414h
	BP = 00AEh (driver ID for V_8041)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	clears a flag in the 8041 indicating that a second 256K bank of RAM
	  on the motherboard is enabled, causing the second bank to be disabled
Note:	this function should normally never be called
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=00AEh,AX=040Eh/BP=00AEh
SeeAlso: AX=0412h/BP=00AEh,AX=0418h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F0414BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_REPORT_NAME" - GET DEV NAME

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CRV_REPORT_NAME" - GET DEV NAME
	AX = 0414h
	BP = 0114h (driver ID for V_HPHIL)
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	ES:SI -> 15-byte buffer for name
Return: AH = status (see #03744)
	CX = number of bytes returned in buffer
	BP,DS destroyed
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=00h"HP Vectra",AX=0412h/BP=0114h

Top

6F0416BP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_SET_CRTSW" - SET CRT TO MULTIMODE

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_SET_CRTSW" - SET CRT TO MULTIMODE
	AX = 0416h
	BP = 00AEh (driver ID for V_8041)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	sets a flag in the 8041 indicating that the primary display is the
	  Multimode graphics adapter (default)
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=00AEh,AX=040Eh/BP=00AEh
SeeAlso: AX=0412h/BP=00AEh,AX=0418h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F0416BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_KEYBOARD_REPEAT" - SET TYPEMATIC

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_KEYBOARD_REPEAT" - SET TYPEMATIC
	AX = 0416h
	BP = 0114h (driver ID for V_HPHIL)
	BH = what to set (00h typematic rate, 01h delay, 02h both)
	BL = flag (00h = non-CCP keypad, 01h = Cursor Control Pad only)
	DL = rate
	    bits 7-4: delay value
	    bits 3-0: typematic rate
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=040Eh/BP=0114h,AX=0418h/BP=0114h

Top

6F0418BP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLR_CRTSW" - SET CRT TO MONOCHROME

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_CLR_CRTSW" - SET CRT TO MONOCHROME
	AX = 0418h
	BP = 00AEh (driver ID for V_8041)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	clears a flag in the 8041, indicating that the primary display is the
	  monochrome adapter
SeeAlso: AH=00h"HP Vectra",AX=040Ch/BP=00AEh,AX=040Eh/BP=00AEh
SeeAlso: AX=0414h/BP=00AEh,AX=0416h/BP=00AEh,AX=041Ah/BP=00AEh

Top

6F0418BP0114 - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_KEYBOARD_LED" - SET KEYBOARD LEDS

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_KEYBOARD_LED" - SET KEYBOARD LEDS
	AX = 0418h
	BP = 0114h (driver ID for V_HPHIL)
	BL = new LED states
	    bit 0: scroll lock
	    bit 1: NumLock
	    bit 2: CapsLock
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=040Eh/BP=0114h,AX=0416h/BP=0114h

Top

6F041ABP00AE - INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_PASS_THRU" - SEND DATA BYTE TO 8041

INT 6F - HP Vectra EX-BIOS - "F_IO_CTRL SF_PASS_THRU" - SEND DATA BYTE TO 8041
	AX = 041Ah
	BP = 00AEh (driver ID for V_8041)
	BL = byte to send to 8041
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=040Ah/BP=00AEh,AX=040Eh/BP=00AEh

Top

6F05 - INT 6F - 10NET - RECEIVE

INT 6F - 10NET - RECEIVE
	AH = 05h
	CX = number of seconds before timeout
	DS:DX -> receive buffer (see #03761)
Return: CF clear if successful
	    AH = FEh if dequeued message is a CB message
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AH=04h"10NET"

Format of 10NET receive buffer:
Offset	Size	Description	(Table 03761)
 00h 12 BYTEs	sending node's ID
 0Ch	WORD	length of message
 0Eh  N BYTEs	message (maximum 1024 bytes)

Top

6F06 - INT 6F - HP Vectra EX-BIOS - "F_PUT_BYTE" - WRITE A BYTE OF DATA TO DEVICE

INT 6F - HP Vectra EX-BIOS - "F_PUT_BYTE" - WRITE A BYTE OF DATA TO DEVICE
	AH = 06h
	BP = driver ID (see #03741) for V_HPHIL, others
	AL = value to output
	---if driver is V_HPHIL---
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	DL = HP-HIL device register (00h-7Fh)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	output a byte to a specific HP-HIL device register
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=04h"HP Vectra",AH=08h"F_GET_BYTE",AH=0Ah"F_PUT_BUFFER"

Top

6F06 - INT 6F - HP Vectra EX-BIOS - "F_SAMPLE" - POLL CURRENT ABSOLUTE POSITION

INT 6F - HP Vectra EX-BIOS - "F_SAMPLE" - POLL CURRENT ABSOLUTE POSITION
	AH = 06h
	BP = driver ID (see #03741) for V_LTOUCH, V_LPOINTER, V_LTABLET, etc.
Return: AH = status (see #03744)
	BX = current logical X position
	CX = current logical Y position
	DL = button transitions (bit N = button N state has changed)
	DH = current button states (bit N = current button N state)
	ES:0000h -> logical device's Describe Record (see #03749)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=040Ah"SF_EVENT_ON",AX=040Eh"SF_CLIPPING_ON"

Top

6F06--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_XCHGFIX" - EXCH VALUES WITH FIXED VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_XCHGFIX" - EXCH VALUES WITH FIXED VECTOR
	AH = 06h
	BP = 0012h (driver ID for V_SYSTEM)
	BX = vector address
	DX = new value for DS
	ES:DI -> new CS:IP entry point
Return: AH = status (see #03744)
	DX = old value for DS
	ES:DI -> old CS:IP entry point
	BP,DS destroyed
Desc:	replace an existing EX-BIOS driver at a fixed HPVT location without
	  initialization
SeeAlso: AH=00h"HP Vectra",AH=04h"F_INS_BASEHPVT",AH=08h"F_INS_XCHGRSVD"
SeeAlso: AH=0Ah"F_INS_XCHGFREE",AH=0Ch"F_INS_FIXOWNDS"

Top

6F06--BP002A - INT 6F - HP Vectra EX-BIOS - "F_INQUIRE" - GET DRIVER PHYSICAL DESCRIBE RECORD

INT 6F - HP Vectra EX-BIOS - "F_INQUIRE" - GET DRIVER PHYSICAL DESCRIBE RECORD
	AH = 06h
	BP = 002Ah (driver ID for V_SINPUT)
	AL = HP-HIL physical device number (01h-07h)
Return: AH = status (see #03744)
	ES:SI -> physical describe record for driver
	BP,DS destroyed
Note:	the returned physical describe record must not be modified
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=002Ah,AH=08h/BP=002Ah,AH=0Ah/BP=002Ah
SeeAlso: AH=0Ch/BP=002Ah

Top

6F06--BP005A - INT 6F - HP Vectra EX-BIOS - "F_TRACK_ON" - ENABLE CURSOR TRACKING

INT 6F - HP Vectra EX-BIOS - "F_TRACK_ON" - ENABLE CURSOR TRACKING
	AH = 06h
	BP = 005Ah (driver ID for V_STRACK)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=04h"F_TRACK_INIT",AH=08h"F_TRACK_OFF"
SeeAlso: AH=0Ah"F_DEF_MASKS",AH=0Ch"F_SET_LIMITS_X"

Top

6F07 - INT 6F - 10NET - LOCK HANDLE

INT 6F - 10NET - LOCK HANDLE
	AH = 07h
	BX = file handle
	CX:DX = starting offset in file
	SI = record length
Return: CF clear if successful
	CF set on error
	    AX = error code (see also AH=00h)
		0002h file not found
SeeAlso: AH=08h"10NET",AH=0Fh,INT 21/AH=5Ch

Top

6F08 - INT 6F - 10NET - UNLOCK HANDLE

INT 6F - 10NET - UNLOCK HANDLE
	AH = 08h
	BX = file handle
	AL = mode
	    00h unlock all
	    01h unlock record at CX:DX
Return: CF clear if successful
	CF set on error
	    AX = error code (see also AH=00h)
		0002h file not found
SeeAlso: AH=07h,AH=0Fh,INT 21/AH=5Ch

Top

6F08 - INT 6F - HP Vectra EX-BIOS - "F_GET_BYTE" - READ A BYTE OF DATA FROM DEVICE

INT 6F - HP Vectra EX-BIOS - "F_GET_BYTE" - READ A BYTE OF DATA FROM DEVICE
	AH = 08h
	BP = driver ID (see #03741) for V_HPHIL (0114h), others
	---if device is V_HPHIL---
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	DL = HP-HIL device register (00h-7Fh)
Return: AH = status (see #03744)
	AL = value read from device
	BP,DS destroyed
Desc:	generic read-byte function; for driver V_HPHIL, retrieves the value
	  of a specific HP-HIL device register
Note:	this function is only available if the driver is in the open state
	  (see AX=020Eh"SF_OPEN")
SeeAlso: AH=06h"F_PUT_BYTE",AH=0Ah"F_PUT_BUFFER",AH=0Ch"F_GET_BUFFER"

Top

6F08--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_XCHGRSVD" - EXCH VALUES WITH RESRVED VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_XCHGRSVD" - EXCH VALUES WITH RESRVED VECTOR
	AH = 08h
	BP = 0012h (driver ID for V_SYSTEM)
	DX = new value for DS
	ES:DI -> new CS:IP entry point
Return: AH = status (00h,F6h) (see also #03744)
	    00h successful
		BX = vector address used
		DX = old value for DS
		ES:DI -> old CS:IP entry point
	BP,DS destroyed
Desc:	exchange the supplied entry point and DS with the values in the next
	  reserved entry in the HP_VECTOR_TABLE
Note:	returns AH=F6h if no more reserved vectors are available
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=06h/BP=0012h,AH=0Ah/BP=0012h
SeeAlso: AH=0Ch/BP=0012h

Top

6F08--BP002A - INT 6F - HP Vectra EX-BIOS - "F_INQUIRE_ALL" - GET DRIVER STATUS TABLE

INT 6F - HP Vectra EX-BIOS - "F_INQUIRE_ALL" - GET DRIVER STATUS TABLE
	AH = 08h
	BP = 002Ah (driver ID for V_SINPUT)
	ES:SI -> buffer for device status table (see #03762)
Return: AH = status (see #03744)
	ES:SI buffer filled
	BP,DS destroyed
Note:	the returned physical describe record must not be modified
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=002Ah,AH=06h/BP=002Ah,AH=0Ah/BP=002Ah
SeeAlso: AH=0Ch/BP=002Ah

Format of HP Vectra HP-HIL physical device status table:
Offset	Size	Description	(Table 03762)
 00h	BYTE	status for HP-HIL device #1
		bit 0: device present
		bits 7-2 reserved
 01h	BYTE	device ID for HP-HIL device #1
	...
 0Ch	BYTE	status for HP-HIL device #7
 0Dh	BYTE	device ID for HP-HIL device #7

Top

6F08--BP005A - INT 6F - HP Vectra EX-BIOS - "F_TRACK_OFF" - DISABLE CURSOR TRACKING

INT 6F - HP Vectra EX-BIOS - "F_TRACK_OFF" - DISABLE CURSOR TRACKING
	AH = 08h
	BP = 005Ah (driver ID for V_STRACK)
Return: AH = status (see #03744)
	BP,DS destroyed
Note:	also removes the graphics cursor sprite from the screen
SeeAlso: AH=00h"HP Vectra",AH=04h"F_TRACK_INIT",AH=06h"F_TRACK_ON"
SeeAlso: AH=0Ah"F_DEF_MASKS",AH=0Ch"F_SET_LIMITS_X"

Top

6F09 - INT 6F - 10NET - SUBMIT

INT 6F - 10NET - SUBMIT
	AH = 09h
	DS:BX -> submit record (see #03763)
SeeAlso: AH=04h"10NET"

Format of 10NET submit record:
Offset	Size	Description	(Table 03763)
 00h 12 BYTEs	destination node ID (must be logged in)
 0Ch	WORD	length+2 of following 'command line' text
 0Eh  N BYTEs	command line text (<=100 bytes), system adds CR

Top

6F0A - INT 6F - 10NET - CHAT

INT 6F - 10NET - CHAT
	AH = 0Ah
	DS:BX -> control parameters (see #03764)
	DS:DX -> chat message (see #03765)
SeeAlso: AH=04h"10NET",AH=8Ah

Format of 10NET chat control parameters:
Offset	Size	Description	(Table 03764)
 00h  8 BYTEs	sender ID, defaults to node's userID if nulls
 08h  8 BYTEs	destination user ID, 'EVERYONE' may be used
 10h 12 BYTEs	destination node ID

Format of 10NET chat message:
Offset	Size	Description	(Table 03765)
 00h	WORD	length+2 of following text
 02h  N BYTEs	text, max 101 bytes

Top

6F0A - INT 6F - HP Vectra EX-BIOS - "F_PUT_BUFFER" - WRITE A BUFFER TO DEVICE

INT 6F - HP Vectra EX-BIOS - "F_PUT_BUFFER" - WRITE A BUFFER TO DEVICE
	AH = 0Ah
	BP = driver ID (see #03741) for V_HPHIL (0114h), others
	CX = number of bytes to write
	ES:DI -> buffer containing data
	---if driver is V_HPHIL---
	BX = device address indicator (see #03760)
	DH = HP HIL device major address
	DL = HP-HIL device register (00h-7Fh)
Return: AH = status (see #03744)
	CX = number of unwritten bytes left in buffer
	BP,DS destroyed
SeeAlso: AH=06h"F_PUT_BYTE",AH=0Ah"F_PUT_BLOCK",AH=0Ch"F_GET_BUFFER"
SeeAlso: AH=0Eh"F_PUT_WORD"

Top

6F0A - INT 6F - HP Vectra EX-BIOS - "F_PUT_BLOCK" - WRITE BLOCKS TO DEVICE

INT 6F - HP Vectra EX-BIOS - "F_PUT_BLOCK" - WRITE BLOCKS TO DEVICE
	AH = 0Ah
	BP = driver ID (see #03741) for block device
	DH = device major number
	DL = device minor number
	ES:DI -> command block (see #03766)
Return: AH = status (see #03744)
	BX = operation status
	BP,DS destroyed
SeeAlso: AH=06h"F_PUT_BYTE",AH=0Ah"F_PUT_BUFFER",AH=0Ch"F_GET_BUFFER"
SeeAlso: AH=0Eh"F_PUT_WORD"

Format of HP Vectra F_PUT_BLOCK/F_GET_BLOCK command block:
Offset	Size	Description	(Table 03766)
 00h	DWORD	data transfer address
 04h	WORD	number of blocks
 06h	DWORD	block address (some devices only use low word)

Top

6F0A--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_XCHGFREE" - EXCH VALUES WITH FREE VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_XCHGFREE" - EXCH VALUES WITH FREE VECTOR
	AH = 0Ah
	BP = 0012h (driver ID for V_SYSTEM)
	DX = new value for DS
	ES:DI -> new CS:IP entry point
Return: AH = status (00h,F6h) (see also #03744)
	    00h successful
		BX = vector address used
		DX = old value for DS
		ES:DI -> old CS:IP entry point
	BP,DS destroyed
Desc:	exchange the supplied entry point and DS with the values in the next
	  free entry in the HP_VECTOR_TABLE
Note:	returns AH=F6h if no more reserved vectors are available
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=06h/BP=0012h,AH=08h/BP=0012h
SeeAlso: AH=0Ch/BP=0012h

Top

6F0A--BP002A - INT 6F - HP Vectra EX-BIOS - "F_INQUIRE_FIRST" - GET PHYSICAL DRIVER VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INQUIRE_FIRST" - GET PHYSICAL DRIVER VECTOR
	AH = 0Ah
	BP = 002Ah (driver ID for V_SINPUT)
Return: AH = status (see #03744)
	BX = vector address for first HP-HIL device
	BP,DS destroyed
Note:	all seven HP-HIL devices use consecutive vectors in the
	  HP_VECTOR_TABLE
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=002Ah,AH=06h/BP=002Ah,AH=08h/BP=002Ah
SeeAlso: AH=0Ch/BP=002Ah

Top

6F0A--BP005A - INT 6F - HP Vectra EX-BIOS - "F_DEF_MASKS" - DEFINE GRAPHICS CURSOR MASKS

INT 6F - HP Vectra EX-BIOS - "F_DEF_MASKS" - DEFINE GRAPHICS CURSOR MASKS
	AH = 0Ah
	BP = 005Ah (driver ID for V_STRACK)
	BH = width of save area in bytes
	BL = hot-spot X coordinate
	CH = height in scan lines
	CL = hot-spot Y coordinate
	ES:SI -> sprite mask (screen mask followed by XOR sprite mask)
Return: AH = status (see #03744)
	BP,DS destroyed
Note:	the save area is one byte wider than the actual sprite mask; the total
	  size of the sprite is at most 144 bytes
SeeAlso: AH=00h"HP Vectra",AH=04h"F_TRACK_INIT",AH=08h"F_TRACK_OFF"
SeeAlso: AH=0Ch"F_SET_LIMITS_X",AH=10h"F_PUT_SPRITE",AH=12h"F_REMOVE_SPRITE"

Top

6F0B - INT 6F - 10NET - LOCK SEMAPHORE, RETURN IMMEDIATELY

INT 6F - 10NET - LOCK SEMAPHORE, RETURN IMMEDIATELY
	AH = 0Bh
	AL = drive number or 0
	ES:SI = Ethernet address or 0
	DS:BX -> 31-byte ASCIZ semaphore name
Return: AL = status (see #03767)
Note:	same as INT 60/AH=12h
SeeAlso: AH=0Ch"10NET",INT 60/AH=12h

(Table 03767)
Values for 10NET status:
 00h	successful
 01h	semaphore currently locked
 02h	server not responding
 03h	invalid semaphore name
 04h	semaphore list is full
 05h	invalid drive ID
 06h	invalid Ethernet address
 07h	not logged in
 08h	write to network failed
 09h	semaphore already logged in this CPU
SeeAlso: #03740
Index:	error codes;10-Net|10-Net;error codes

Top

6F0C - INT 6F - 10NET - UNLOCK SEMAPHORE

INT 6F - 10NET - UNLOCK SEMAPHORE
	AH = 0Ch
	AL = drive number or 0
	ES:SI = Ethernet address or 0
	DS:BX -> 31-byte ASCIZ semaphore name
Return: AL = status (see also #03767)
	    01h semaphore not locked
Note:	same as INT 60/AH=13h
SeeAlso: AH=0Bh,INT 60/AH=13h

Top

6F0C - INT 6F - HP Vectra EX-BIOS - "F_GET_BUFFER" - READ A BUFFER OF DATA FROM DEVICE

INT 6F - HP Vectra EX-BIOS - "F_GET_BUFFER" - READ A BUFFER OF DATA FROM DEVICE
	AH = 0Ch
	BP = driver ID (see #03741) for V_HPHIL (0114h), others
	CX = number of bytes or blocks to read
	DS:SI -> buffer for received data
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
SeeAlso: AH=08h"F_GET_BYTE",AH=0Ah"F_PUT_BUFFER",AH=0Ch"F_GET_BLOCK"
SeeAlso: AH=10h"F_GET_WORD"

Top

6F0C - INT 6F - HP Vectra EX-BIOS - "F_GET_BLOCK" - READ BLOCKS OF DATA FROM DEVICE

INT 6F - HP Vectra EX-BIOS - "F_GET_BLOCK" - READ BLOCKS OF DATA FROM DEVICE
	AH = 0Ch
	BP = driver ID (see #03741)
	DH = device major number
	DL = device minor number
	ES:DI -> command block (see #03766)
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	BX = operation status
	BP,DS destroyed
SeeAlso: AH=08h"F_GET_BYTE",AH=0Ah"F_PUT_BLOCK",AH=0Ch"F_GET_BUFFER"
SeeAlso: AH=10h"F_GET_WORD"

Top

6F0C--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FIXOWNDS" - INSTALL VALUES IN FIXED VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_FIXOWNDS" - INSTALL VALUES IN FIXED VECTOR
	AH = 0Ch
	BP = 0012h (driver ID for V_SYSTEM)
	BX = vector address used
	ES:DI -> new CS:IP entry point
Return: AH = status (00h) (see #03744)
	BP,DS destroyed
Note:	on installation, the given entry point will be invoked with an SF_INIT
	  call (see AX=0200h"SF_INIT"), which should return the routine's DS
	  in BX.  If the SF_INIT call returns with error code FEh, the power-on
	  self-test sequence will be called.
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=06h/BP=0012h,AH=08h/BP=0012h
SeeAlso: AH=0Eh/BP=0012h,AH=12h/BP=0012h

Top

6F0C--BP002A - INT 6F - HP Vectra EX-BIOS - "F_INQUIRE_ENTRY" - GET GID DRIVER ENTRY POINT

INT 6F - HP Vectra EX-BIOS - "F_INQUIRE_ENTRY" - GET GID DRIVER ENTRY POINT
	AH = 0Ch
	BP = 002Ah (driver ID for V_SINPUT)
Return: AH = status (see #03744)
	ES:BX -> physical GID driver CS:IP
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AX=0400h/BP=002Ah,AH=06h/BP=002Ah,AH=08h/BP=002Ah
SeeAlso: AH=0Ah/BP=002Ah

Top

6F0C--BP005A - INT 6F - HP Vectra EX-BIOS - "F_SET_LIMITS_X" - SET HORIZONTAL TRACKING LIMITS

INT 6F - HP Vectra EX-BIOS - "F_SET_LIMITS_X" - SET HORIZONTAL TRACKING LIMITS
	AH = 0Ch
	BP = 005Ah (driver ID for V_STRACK)
	CX = minimum X coordinate
	DX = maximum X coordinate
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=005Ah,AH=08h/BP=005Ah,AH=0Eh/BP=005Ah
SeeAlso: AH=10h/BP=005Ah,AH=12h/BP=005Ah,INT 33/AX=0007h

Top

6F0D - INT 6F - 10NET - "WHO" - ENUMERATE USERS ON NETWORK

INT 6F - 10NET - "WHO" - ENUMERATE USERS ON NETWORK
	AH = 0Dh
	AL = type code
	    01h return superstations only
	    02h return non-superstations only
	    otherwise return all
	CX = length of data buffer
	DS:DX -> array of records to be filled (see #03768)
Return: CL = number of records returned (responding stations)
SeeAlso: AH=16h,AH=8Dh

Format of station record:
Offset	Size	Description	(Table 03768)
 00h 12 BYTEs	node ID
 0Ch	BYTE	station flags (see #03769)
---if AL = 01h---
 0Dh	BYTE	version number
 0Eh	WORD	level number of 10Net software in responding node
---if AL = 02h---
 0Dh  8 BYTEs	user ID
 15h	BYTE	version number
 16h	WORD	level number

Bitfields for station flags:
Bit(s)	Description	(Table 03769)
 1	workstation
 2	superstation
 3	xgate
 4	active gate

Top

6F0E - INT 6F - 10NET - SPOOL/PRINT

INT 6F - 10NET - SPOOL/PRINT
	AH = 0Eh
	DS:DX -> spool/print record (see #03771)
Return: CF clear if successful
	CF set on error
	    AX = error code (see also #03740)
		17FFh device not mounted
		18FFh already spooling to named device

(Table 03770)
Values for 10NET spooler operation code:
 0000h	initiate spool
 0001h	abort print
 0002h	close spool
 0003h	delete spool
 0004h	print
 0005h	get report info
 0006h	set chat template
 0007h	queue
 0008h	return queue
 0009h	queue non-spooled file for printing

Format of 10NET Spool/Print record:
Offset	Size	Description	(Table 03771)
 00h	WORD	operation code (see #03770)
 02h 11 BYTEs	file name in FCB format
---if operation code = 00h or 06h---
 0Dh	BYTE	notification flags (see #03772)
 0Eh	BYTE	days to keep (FFh=forever)
 0Fh	BYTE	bits 0,1: device (1=LPT1)
		bits 4-7: remote drive to store spool file (1=A,...)
 10h	WORD	length of following data area
 12h  N BYTEs	up to 64 bytes of description
---if operation code = 03h---
 0Dh  8 BYTEs	user ID to associate with filename
---if operation code = 04h---
 0Dh	WORD	block number
 0Fh  8 BYTEs	user ID to associate with filename
---if operation code = 05h---
 0Dh	BYTE	RRN to start retrieve
 0Eh	BYTE	bits 0,1: local print device (LPTx)
		bit 3: if set, return entries for all users
 0Fh	WORD	length of following area
 11h  N BYTEs	up to 1500 bytes to receive $SCNTL records returned
---if operation code = 07h---
 0Dh	BYTE	queue number
 0Eh	BYTE	bits 0,1: local print device (LPTx)
 0Fh	WORD	number of bytes of test print to be done
 11h	BYTE	code:
		01h print device
		02h test print count
		03h prn
---if operation code = 08h---
 0Dh	BYTE	queue location or $SCNTL location to start access
		returns next item for access:
		    00h-7Fh queued items
		    80h-FEh non-queued, non-printed items
		    FFh	no more items
 0Eh	WORD	unused
 10h	WORD	length of following area
 12h  N BYTEs	up to 64 bytes to receive $SCNTL records (see #03773)
---if operation code = 09h---
 0Dh  3 BYTEs	unused
 10h  N BYTEs	path to non-spooled file to be queued for printing

Bitfields for notification flags:
Bit(s)	Description	(Table 03772)
 7	queue to top
 6	do ID page
 5	no form feed
 4	reserved
 3	explicit queuing only
 2	notify at print completion
 1	notify server operator, with reply
 0	notify at print start

Format of 10NET $SCNTL record:
Offset	Size	Description	(Table 03773)
 00h  8 BYTEs	user ID
 08h 11 BYTEs	filename in FCB format
 13h  6 BYTEs	node ID
 19h  3 BYTEs	creation date
 1Ch	BYTE	notification flags (see #03772)
 1Dh	BYTE	retention time in days
 1Eh	BYTE	printing device (LPTx)
 1Fh  3 BYTEs	date last printed (0 = never)
 22h	BYTE	device containing spoolfile
 23h	WORD	bytes to print for test print
 25h	WORD	block number to start print
 27h	BYTE	reserved

Top

6F0E - INT 6F - HP Vectra EX-BIOS - "F_PUT_WORD" - WRITE WORD OF DATA TO DEVICE

INT 6F - HP Vectra EX-BIOS - "F_PUT_WORD" - WRITE WORD OF DATA TO DEVICE
	AH = 0Eh
	BP = driver ID (see #03741)
	DX = data word
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
SeeAlso: AH=06h"F_PUT_BYTE",AH=0Ah"F_PUT_BUFFER",AH=10h"F_GET_WORD"

Top

6F0E - INT 6F - HP Vectra EX-BIOS - "F_PUT_WORD" - WRITE A WORD OF DATA

INT 6F - HP Vectra EX-BIOS - "F_PUT_WORD" - WRITE A WORD OF DATA
	AH = 0Eh
	BP = driver ID (see #03741)
	??? details not yet available
Return: ???
SeeAlso: AH=06h"HP Vectra",AH=0Ah"HP Vectra",AH=10h"HP Vectra"

Top

6F0E--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FIXGETDS" - INSTALL VALUES IN FIXED VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_FIXGETDS" - INSTALL VALUES IN FIXED VECTOR
	AH = 0Eh
	BP = 0012h (driver ID for V_SYSTEM)
	BX = vector address used
	ES:DI -> new CS:IP entry point
Return: AH = status (00h) (see #03744)
	BP,DS destroyed
Note:	on installation, the given entry point will be invoked with an SF_INIT
	  call (see AX=0200h"SF_INIT"), with the "last used DS" value in BX;
	  the routine should adjust BX and return the new value.  If the
	  SF_INIT call returns with error code FEh, the power-on self-test
	  sequence will be called.
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=06h/BP=0012h,AH=0Ch/BP=0012h
SeeAlso: AH=10h/BP=0012h,AH=14h/BP=0012h

Top

6F0E--BP005A - INT 6F - HP Vectra EX-BIOS - "F_SET_LIMITS_Y" - SET VERTICAL TRACKING LIMITS

INT 6F - HP Vectra EX-BIOS - "F_SET_LIMITS_Y" - SET VERTICAL TRACKING LIMITS
	AH = 0Eh
	BP = 005Ah (driver ID for V_STRACK)
	CX = minimum Y coordinate
	DX = maximum Y coordinate
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=005Ah,AH=08h/BP=005Ah,AH=0Ch/BP=005Ah
SeeAlso: AH=10h/BP=005Ah,AH=12h/BP=005Ah,INT 33/AX=0008h

Top

6F0F - INT 6F - 10NET v5.0 - "RM LOCK" - ???

INT 6F - 10NET v5.0 - "RM LOCK" - ???
	AH = 0Fh
	???
Return: ???
SeeAlso: AH=07h,AH=08h"10NET"

Top

6F10 - INT 6F - 10NET - ATTACH/DETACH PRINTER

INT 6F - 10NET - ATTACH/DETACH PRINTER
	AH = 10h
	AL = subfunction
	    00h initiate spooling if LPT1 is mounted
	    01h terminate spooling if LPT1 is mounted
SeeAlso: INT 21/AX=5D08h

Top

6F10 - INT 6F - HP Vectra EX-BIOS - "F_GET_WORD" - READ WORD OF DATA FROM DEVICE

INT 6F - HP Vectra EX-BIOS - "F_GET_WORD" - READ WORD OF DATA FROM DEVICE
	AH = 10h
	BP = driver ID (see #03741)
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	DX = data word
	BP,DS destroyed
SeeAlso: AH=08h"F_GET_BYTE",AH=0Ch"F_GET_BUFFER",AH=0Eh"F_PUT_WORD"

Top

6F10--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FIXGLBDS" - INSTALL VALUES IN FIXED VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_FIXGLBDS" - INSTALL VALUES IN FIXED VECTOR
	AH = 10h
	BP = 0012h (driver ID for V_SYSTEM)
	BX = vector address used
	ES:DI -> new CS:IP entry point
Return: AH = status (00h) (see #03744)
	BP,DS destroyed
Note:	on installation, the given entry point will be invoked with an SF_INIT
	  call (see AX=0200h"SF_INIT"), with BX set to the EX-BIOS global
	  data area. If the SF_INIT call returns with error code FEh, the
	  power-on self-test sequence will be called.
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=06h/BP=0012h
SeeAlso: AH=0Ch/BP=0012h,AH=0Eh/BP=0012h,AH=12h/BP=0012h,AH=16h/BP=0012h

Top

6F10--BP005A - INT 6F - HP Vectra EX-BIOS - "F_PUT_SPRITE" - DISPLAY GRAPHICS CURSOR SPRITE

INT 6F - HP Vectra EX-BIOS - "F_PUT_SPRITE" - DISPLAY GRAPHICS CURSOR SPRITE
	AH = 10h
	BP = 005Ah (driver ID for V_STRACK)
	BX = X coordinate
	CX = Y coordinate
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=04h"F_TRACK_INIT",AH=08h"F_TRACK_OFF"
SeeAlso: AH=12h"F_REMOVE_SPRITE",INT 33/AX=0004h

Top

6F11 - INT 6F - 10NET - LOCK FCB

INT 6F - 10NET - LOCK FCB
	AH = 11h
	AL = mode
	    01h sequential
	    02h random
	    03h random block
		CX = number of records
	DS:DX -> FCB (see #01345 at INT 21/AH=0Fh)
Return: CF clear if successful
	CF set on error
	    AX = error code (see also #03740)
		0002h file not found
SeeAlso: AH=12h,INT 21/AH=0Fh

Top

6F12 - INT 6F - 10NET - UNLOCK FCB

INT 6F - 10NET - UNLOCK FCB
	AH = 12h
	AL = mode
	    00h sequential
	    01h random
	    02h random block
		CX = number of records
	DS:DX -> FCB (see #01345 at INT 21/AH=0Fh)
Return: CF clear if successful
	CF set on error
	    AX = error code (see also #03740)
		0002h file not found
SeeAlso: AH=11h

Top

6F12--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FREEOWNDS" - INSTALL VALUES IN FREE VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_FREEOWNDS" - INSTALL VALUES IN FREE VECTOR
	AH = 12h
	BP = 0012h (driver ID for V_SYSTEM)
	ES:DI -> new CS:IP entry point
Return: AH = status (00h) (see #03744)
	BP,DS destroyed
Note:	on installation, the given entry point will be invoked with an SF_INIT
	  call (see AX=0200h"SF_INIT"), which should return the routine's DS
	  in BX.  If the SF_INIT call returns with error code FEh, the power-on
	  self-test sequence will be called.
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=0Ch/BP=0012h,AH=14h/BP=0012h
SeeAlso: AH=16h/BP=0012h,AH=18h/BP=0012h

Top

6F12--BP005A - INT 6F - HP Vectra EX-BIOS - "F_REMOVE_SPRITE" - REMOVE GRAPHICS CURSOR SPRITE

INT 6F - HP Vectra EX-BIOS - "F_REMOVE_SPRITE" - REMOVE GRAPHICS CURSOR SPRITE
	AH = 12h
	BP = 005Ah (driver ID for V_STRACK)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=06h"F_TRACK_ON",AH=10h"F_PUT_SPRITE"

Top

6F13 - INT 6F - 10NET v3.3+ - GET REMOTE CONFIGURATION TABLE ADDRESS

INT 6F - 10NET v3.3+ - GET REMOTE CONFIGURATION TABLE ADDRESS
	AH = 13h
	DS:DX -> node ID, 12 bytes blank-padded
Return: CF clear if successful
	    ES:BX = configuration table address on given machine
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AH=03h

Top

6F14 - INT 6F - 10NET v3.3+ - GET REMOTE MEMORY

INT 6F - 10NET v3.3+ - GET REMOTE MEMORY
	AH = 14h
	BX:SI = address of remote memory
	CX = length (<=1024 bytes)
	DS:DX -> node ID, 12 bytes blank-padded
	DS:DI -> area to receive remote memory image
Return: CF clear if successful
	    CX = amount of memory copied to DS:SI
	CF set on error
	    AX = error code (see #03740)

Top

6F14--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FREEGETDS" - INSTALL VALUES IN FREE VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_FREEGETDS" - INSTALL VALUES IN FREE VECTOR
	AH = 14h
	BP = 0012h (driver ID for V_SYSTEM)
	ES:DI -> new CS:IP entry point
Return: AH = status (00h) (see #03744)
	BP,DS destroyed
Note:	on installation, the given entry point will be invoked with an SF_INIT
	  call (see AX=0200h"SF_INIT"), with the "last used DS" value in BX;
	  the routine should adjust BX and return the new value.  If the
	  SF_INIT call returns with error code FEh, the power-on self-test
	  sequence will be called.
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=0Eh/BP=0012h,AH=12h/BP=0012h
SeeAlso: AH=16h/BP=0012h

Top

6F1501 - INT 6F - 10NET v3.3+ - GET SHARED DEVICE ENTRY

INT 6F - 10NET v3.3+ - GET SHARED DEVICE ENTRY
	AX = 1501h
	BX = zero-based index
	DS:SI -> node ID, 12 bytes blank-padded
	ES:DI -> 85-byte buffer for shared device table entry (see #03774)
Return: CF clear if successful
	    ES:DI buffer contains shared device table entry of BXth device
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AX=1502h,AX=1503h,AX=9501h

Format of 10NET shared device table entry:
Offset	Size	Description	(Table 03774)
 00h  8 BYTEs	device
 08h  8 BYTEs	alias
 10h 64 BYTEs	path
 50h  8 BYTEs	password
 58h	BYTE	access
 59h  4 BYTEs	mask

Top

6F1502 - INT 6F - 10NET v3.3+ - SET SHARED DEVICE ENTRY

INT 6F - 10NET v3.3+ - SET SHARED DEVICE ENTRY
	AX = 1502h
	DS:SI -> node ID, 12 bytes blank-padded
	ES:DI -> valid shared device table entry
Return: CF clear if successful
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AX=1501h,AX=1503h,AX=9502h

Top

6F1503 - INT 6F - 10NET v3.3+ - DELETE SHARED DEVICE ENTRY

INT 6F - 10NET v3.3+ - DELETE SHARED DEVICE ENTRY
	AX = 1503h
	BX = zero-based index
	DS:SI -> node ID, 12 bytes blank-padded
Return: CF clear if successful
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AX=1501h,AX=1502h,AX=9503h

Top

6F16 - INT 6F - 10NET v5.0 - "GL WHO" - ???

INT 6F - 10NET v5.0 - "GL WHO" - ???
	AH = 16h
	???
Return: ???
SeeAlso: AH=0Dh

Top

6F16--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FREEGLBDS" - INSTALL VALUES IN FREE VECTOR

INT 6F - HP Vectra EX-BIOS - "F_INS_FREEGLBDS" - INSTALL VALUES IN FREE VECTOR
	AH = 16h
	BP = 0012h (driver ID for V_SYSTEM)
	ES:DI -> new CS:IP entry point
Return: AH = status (00h) (see #03744 at INT 6F/AH=00h"HP Vectra")
	BP,DS destroyed
Note:	on installation, the given entry point will be invoked with an SF_INIT
	  call (see AX=0200h"SF_INIT"), with BX set to the EX-BIOS global
	  data area.  If the SF_INIT call returns with error code FEh, the
	  power-on self-test sequence will be called.
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=10h/BP=0012h,AH=12h/BP=0012h
SeeAlso: AH=14h/BP=0012h,AH=18h/BP=0012h

Top

6F17 - INT 6F - 10NET v3.3+ - MOUNT

INT 6F - 10NET v3.3+ - MOUNT
	AH = 17h
	AL = local drive number (0=A:)
	BL = remote drive letter or '1'..'3' for LPTn or '4' or '5' for COMx
	DS:DX -> node ID, 12 bytes blank-padded
Return: CF clear if successful
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AH=18h

Top

6F18 - INT 6F - 10NET v3.3+ - UNMOUNT

INT 6F - 10NET v3.3+ - UNMOUNT
	AH = 18h
	AL = local drive number (0=A:)
	BL = type
	    00h	    disk
	    01h-03h LPTn
	    04h,05h COMx
Return: CF clear if successful
	CF set on error
	    AX = error code (see #03740)
SeeAlso: AH=17h

Top

6F18--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_INS_FIND" - FIND DRIVER BY ATTRIBUTES

INT 6F - HP Vectra EX-BIOS - "F_INS_FIND" - FIND DRIVER BY ATTRIBUTES
	AH = 18h
	BP = 0012h (driver ID for V_SYSTEM)
	AL = sense of test (00h equal, 02h non-equal)
	BX = AND mask
	DX = pattern
	SI = first vector address to search
	DI = offset in HP header of field to test
Return: AH = status (00h,FEh) (see #03744 at INT 6F/AH=00h"HP Vectra")
	BP,DS destroyed
	---if AH=00h---
	SI = first matching vector address
Desc:	compare successive drivers' header fields starting at address SI
	  until the header field AND BX is either equal or non-equal to DX
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=0Ch/BP=0012h,AH=10h/BP=0012h
SeeAlso: AH=12h/BP=0012h,AH=16h/BP=0012h

Top

6F19 - INT 6F U - 10NET v5.0 - AUDIT

INT 6F U - 10NET v5.0 - AUDIT
	AH = 19h
	???
Return: ???
SeeAlso: AH=99h

Top

6F1A - INT 6F U - 10NET v5.0 - "BULL" - ???

INT 6F U - 10NET v5.0 - "BULL" - ???
	AH = 1Ah
	???
Return: ???

Top

6F1B - INT 6F U - 10NET v5.0 - "GMOUNT" - ???

INT 6F U - 10NET v5.0 - "GMOUNT" - ???
	AH = 1Bh
	???
Return: ???

Top

6F1C - INT 6F U - 10NET v5.0 - "GLOGIN" - GET LOGIN LIST

INT 6F U - 10NET v5.0 - "GLOGIN" - GET LOGIN LIST
	AH = 1Ch
	???
Return: ???

Top

6F1D - INT 6F U - 10NET v5.0 - "TABDATA" - ???

INT 6F U - 10NET v5.0 - "TABDATA" - ???
	AH = 1Dh
	???
Return: ???

Top

6F1E - INT 6F U - 10NET v5.0 - "SCHED" - ???

INT 6F U - 10NET v5.0 - "SCHED" - ???
	AH = 1Eh
	???
Return: ???

Top

6F1E--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_RAM_GET" - GET EX-BIOS FREE RAM AREA

INT 6F - HP Vectra EX-BIOS - "F_RAM_GET" - GET EX-BIOS FREE RAM AREA
	AH = 1Eh
	BP = 0012h (driver ID for V_SYSTEM)
Return: AH = status (00h) (see #03744 at INT 6F/AH=00h"HP Vectra")
	BX = last-used DS
	DX = maximum DS
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=04h/BP=0012h,AH=20h/BP=0012h,AH=22h/BP=0012h

Top

6F1F - INT 6F U - 10NET v5.0 - "WHOAMI" - ???

INT 6F U - 10NET v5.0 - "WHOAMI" - ???
	AH = 1Fh
	???
Return: ???

Top

6F20 - INT 6F U - 10NET v5.0 - ???

INT 6F U - 10NET v5.0 - ???
	AH = 20h
	???
Return: ???

Top

6F20--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_RAM_RET" - RESERVE EX-BIOS MEMORY

INT 6F - HP Vectra EX-BIOS - "F_RAM_RET" - RESERVE EX-BIOS MEMORY
	AH = 20h
	BP = 0012h (driver ID for V_SYSTEM)
	BX = new value for "last-used DS"
	DX = new value for "maximum DS"
Return: AH = status (00h) (see #03744 at INT 6F/AH=00h"HP Vectra")
	BP,DS destroyed
Note:	the F_INS_FIXGETDS and F_INS_FREEGETDS functions
	  (see AH=0Eh/BP=0012h,AH=14h/BP=0012h) also modify the values returned
	  by this call, requiring care if both methods are used to allocate
	  memory
SeeAlso: AH=00h"HP Vectra",AH=0Eh/BP=0012h,AH=14h/BP=0012h,AH=1Eh/BP=0012h

Top

6F21 - INT 6F U - 10NET v5.0 - ???

INT 6F U - 10NET v5.0 - ???
	AH = 21h
	???
Return: ???

Top

6F22 - INT 6F U - 10NET v5.0 - ???

INT 6F U - 10NET v5.0 - ???
	AH = 22h
	???
Return: ???

Top

6F22--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_CMOS_GET" - READ CMOS MEMORY

INT 6F - HP Vectra EX-BIOS - "F_CMOS_GET" - READ CMOS MEMORY
	AH = 22h
	BP = 0012h (driver ID of V_SYSTEM)
	BL = address of CMOS byte to read
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	AL = byte read
	BP,DS destroyed
Note:	supported by ES, QS, and RS series HP Vectras
SeeAlso: AH=00h"HP Vectra",AH=1Eh/BP=0012h,AH=24h/BP=0012h

Top

6F24--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_CMOS_RET" - WRITE CMOS MEMORY

INT 6F - HP Vectra EX-BIOS - "F_CMOS_RET" - WRITE CMOS MEMORY
	AH = 24h
	BP = 0012h (driver ID of V_SYSTEM)
	BL = address of CMOS byte to write
	AL = new value
Return: AH = status (see #03744)
	BP,DS destroyed
Note:	updates the CMOS checksum fields (both IBM-standard and HP checksums)
SeeAlso: AH=00h"HP Vectra",AH=22h/BP=0012h

Top

6F2A--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_YIELD" - GIVE UP CPU TO OTHER TASKS

INT 6F - HP Vectra EX-BIOS - "F_YIELD" - GIVE UP CPU TO OTHER TASKS
	AH = 2Ah
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744)
	BP,DS destroyed
Note:	this is a hook for multitasking systems
SeeAlso: AH=00h"HP Vectra",INT 15/AX=1000h,INT 2F/AX=1680h

Top

6F30--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_CLICK_ENABLE" - TURN ON KEYCLICKS

INT 6F - HP Vectra EX-BIOS - "F_SND_CLICK_ENABLE" - TURN ON KEYCLICKS
	AH = 30h
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
Desc:	enables keyclicks and flushes any pending keyclicks
SeeAlso: AH=32h/BP=0012h,AH=34h/BP=0012h,AH=36h/BP=0012h

Top

6F32--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_CLICK_DISABLE" - TURN OFF KEYCLICKS

INT 6F - HP Vectra EX-BIOS - "F_SND_CLICK_DISABLE" - TURN OFF KEYCLICKS
	AH = 32h
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	disables keyclicks and flushes any pending keyclicks
SeeAlso: AH=00h"HP Vectra",AH=30h/BP=0012h,AH=38h/BP=0012h

Top

6F34--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_CLICK" - GENERATE KEYCLICK

INT 6F - HP Vectra EX-BIOS - "F_SND_CLICK" - GENERATE KEYCLICK
	AH = 34h
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744)
	BP,DS destroyed
Desc:	generate a keyclick if fewer than four clicks are already pending
Note:	if keyclicks are already pending, the remaining click count is
	  incremented and the function returns immediately
SeeAlso: AH=00h"HP Vectra",AH=30h/BP=0012h,AH=36h/BP=0012h,AH=3Ah/BP=0012h

Top

6F36--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_BEEP_ENABLE" - ENABLE BEEPS

INT 6F - HP Vectra EX-BIOS - "F_SND_BEEP_ENABLE" - ENABLE BEEPS
	AH = 36h
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=30h/BP=0012h,AH=34h/BP=0012h,AH=38h/BP=0012h

Top

6F38--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_BEEP_DISABLE" - DISABLE BEEPS

INT 6F - HP Vectra EX-BIOS - "F_SND_BEEP_DISABLE" - DISABLE BEEPS
	AH = 38h
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=32h/BP=0012h,AH=36h/BP=0012h

Top

6F3A--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_BEEP" - SOUND BEEP WITH CURRENT VALUES

INT 6F - HP Vectra EX-BIOS - "F_SND_BEEP" - SOUND BEEP WITH CURRENT VALUES
	AH = 3Ah
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
Desc:	make a sound of the frequency and duration defined in the EX-BIOS
	  global data area (see #03748)
SeeAlso: AH=00h"HP Vectra",AH=34h/BP=0012h,AH=36h/BP=0012h,AH=38h/BP=0012h
SeeAlso: AH=3Ch/BP=0012h,AH=3Eh/BP=0012h

Top

6F3C--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_SET_BEEP" - SET BEEP FREQUENCY AND DURATION

INT 6F - HP Vectra EX-BIOS - "F_SND_SET_BEEP" - SET BEEP FREQUENCY AND DURATION
	AH = 3Ch
	BP = 0012h (driver ID of V_SYSTEM)
	BX = frequency in Hz (1-25000, 0 = off)
	DX = duration in 10-microsecond increments
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=3Ah/BP=0012h,AH=3Eh/BP=0012h,#03748

Top

6F3E--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_SND_TONE" - SOUND TONE WITH FREQ AND DURATION

INT 6F - HP Vectra EX-BIOS - "F_SND_TONE" - SOUND TONE WITH FREQ AND DURATION
	AH = 3Eh
	BP = 0012h (driver ID of V_SYSTEM)
	BX = frequency in Hz (1-25000, 0 = off)
	DX = duration in 10-microsecond increments
Return: AH = status (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=3Ah/BP=0012h,AH=3Ch/BP=0012h,AH=40h/BP=0012h

Top

6F40--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_STR_GET_FREE_INDEX" - FIND FREE STRING INDEX

INT 6F - HP Vectra EX-BIOS - "F_STR_GET_FREE_INDEX" - FIND FREE STRING INDEX
	AH = 40h
	BP = 0012h (driver ID of V_SYSTEM)
Return: AH = status (see #03744)
	BX = next free string index
	BP,DS destroyed
Desc:	get the next string index available to user programs
SeeAlso: AH=00h"HP Vectra",AH=42h/BP=0012h,AH=44h/BP=0012h,AH=46h/BP=0012h

Top

6F42--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_STR_DEL_BUCKET" - DEL HEADER FROM BUCKET LIST

INT 6F - HP Vectra EX-BIOS - "F_STR_DEL_BUCKET" - DEL HEADER FROM BUCKET LIST
	AH = 42h
	BP = 0012h (driver ID of V_SYSTEM)
	ES:DI -> bucket header (see #03775)
Return: AH = status (00h,FEh) (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=40h/BP=0012h,AH=44h/BP=0012h

Format of HP Vectra EX-BIOS bucket header:
Offset	Size	Description	(Table 03775)
 00h	DWORD	pointer to next bucket header (FFFFh:FFFFh if last)
 04h	WORD	upper bound on string index
 06h	WORD	lower bound on string index
 08h	DWORD	pointer to array of string offset pointers
 0Ch	WORD	segment of strings
Note:	the strings pointed at by the offset pointers are byte-counted ASCIZ
	  strings

Top

6F44--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_STR_PUT_BUCKET" - ADD HEADER TO BUCKET HDR LIST

INT 6F - HP Vectra EX-BIOS - "F_STR_PUT_BUCKET" - ADD HEADER TO BUCKET HDR LIST
	AH = 44h
	BP = 0012h (driver ID of V_SYSTEM)
	ES:DI -> bucket header (see #03775)
Return: AH = status (00h) (see #03744)
	BP,DS destroyed
SeeAlso: AH=00h"HP Vectra",AH=42h/BP=0012h,AH=46h/BP=0012h

Top

6F46--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_STR_GET_STRING" - FIND STRING IN BUCKET LIST

INT 6F - HP Vectra EX-BIOS - "F_STR_GET_STRING" - FIND STRING IN BUCKET LIST
	AH = 46h
	BP = 0012h (driver ID of V_SYSTEM)
	BX = string index
Return: AH = status (00h,other) (see #03744)
	BP,DS destroyed
	---if successful---
	CX = length of string (excluding count byte and terminating NUL)
	DS:SI -> header for string
	ES:DI -> found string
SeeAlso: AH=00h"HP Vectra",AH=44h/BP=0012h,AH=48h/BP=0012h

Top

6F48--BP0012 - INT 6F - HP Vectra EX-BIOS - "F_STR_GET_INDEX" - GET INDEX FOR STRING

INT 6F - HP Vectra EX-BIOS - "F_STR_GET_INDEX" - GET INDEX FOR STRING
	AH = 48h
	BP = 0012h (driver ID of V_SYSTEM)
	ES:DI -> ASCIZ string
Return: AH = status (00h,other) (see #03744 at AH=00h"HP Vectra")
	BP,DS destroyed
	---if successful---
	BX = index for the given string
SeeAlso: AH=00h"HP Vectra",AH=40h/BP=0012h,AH=46h/BP=0012h

Top

6F636FBX6D70 - INT 6F - Clara Empricost - TSR Version - INSTALLATION CHECK

INT 6F - Clara Empricost - TSR Version - INSTALLATION CHECK
	AX = 636Fh ('co')
	BX = 6D70h ('mp')
	CX = 696Eh ('in')
	SS:DX -> WORD to set if installed
Return: SS:DX word set to 636Fh if installed
Program: Condition List Action Rejection Algorithm for the Evaluation
	  of Music at Pseudo-Random Idea COnstruction STage
	  (CLARA EMPRICOST) is an experimental program by Silas Brown
SeeAlso: AX=636Fh/BX=6D70h"UNINSTALL"

Top

6F636FBX6D70 - INT 6F - Clara Empricost - TSR Version - UNINSTALL

INT 6F - Clara Empricost - TSR Version - UNINSTALL
	AX = 636Fh ('co')
	BX = 6D70h ('mp')
	CX = 6F73h ('os')
Return: nothing -- call installation check to determine whether successful
Program: Condition List Action Rejection Algorithm for the Evaluation
	  of Music at Pseudo-Random Idea COnstruction STage
	  (CLARA EMPRICOST) is an experimental program by Silas Brown
Notes:	 Saves any unfinished task and prevents processing of
	   new tasks, even if can't uninstall
	 If INT 28h or INT 6Fh have been chained since installation,
	   returns without changing interrupts or freeing memory
	 do not call while DOS is active (i.e. InDOS flag is nonzero or INT 28
	   is active and InDOS > 1)
SeeAlso: AX=636Fh/BX=6D70h"INSTALLATION CHECK"

Top

6F80 - INT 6F - 10NET v5.0 - LOGIN

INT 6F - 10NET v5.0 - LOGIN
	AH = 80h
	DS:DX -> login record (see #03776)
Return: CF clear if successful
	    BL = number of days until password expires (00h = never)
	    CL = security level
	CF set on error
	    AX = status (see #03740)
SeeAlso: AH=00h,AH=81h

Format of 10NET login record:
Offset	Size	Description	(Table 03776)
 00h  8 BYTEs	user name
 08h  8 BYTEs	password
 10h 15 BYTEs	server node ID
 1Fh  8 BYTEs	new password
 27h	BYTE	invoke mode (00h command line, 01h interactive)

Top

6F81 - INT 6F - 10NET v5.0 - LOGOUT

INT 6F - 10NET v5.0 - LOGOUT
	AH = 81h
	DS:DX -> server node ID (DX=0000h for universal logout)
Return: AX = status (see #03740)
SeeAlso: AH=01h,AH=80h

Top

6F8A - INT 6F - 10NET v5.0 - CHAT

INT 6F - 10NET v5.0 - CHAT
	AH = 8Ah
	DS:BX -> chat parameters (see #03777)
	DS:DX -> chat message (see #03778)
Return: CF clear if successful
	CF set on error
	    AX = status (see #03740)
SeeAlso: AH=0Ah"10NET"

Format of 10NET chat parameters:
Offset	Size	Description	(Table 03777)
 00h  8 BYTEs	sender's user name
 08h  8 BYTEs	destination user name
 10h 15 BYTEs	destination node (0 if broadcast-style chat)

Format of 10NET chat message:
Offset	Size	Description	(Table 03778)
 00h	WORD	message length
 02h  N BYTEs	chat message contents

Top

6F8D - INT 6F - 10NET v5.0 - "WHO" - ENUMERATE USERS ON NETWORK

INT 6F - 10NET v5.0 - "WHO" - ENUMERATE USERS ON NETWORK
	AH = 8Dh
	BX = service mask (see #03779)
	CX = length of buffer
	DS:DX -> buffer for array of Who data structures (see #03780)
Return: CF clear if successful
	    CX = number of nodes matching service mask
	    DS:DX buffer filled
	CF set on error
	    AX = status (see #03740)
SeeAlso: AH=0Dh

Bitfields for 10NET service mask:
Bit(s)	Description	(Table 03779)
 0	workstation
 1	file server
 2	print server
 3	de-spool server

Format of 10NET Who data structure:
Offset	Size	Description	(Table 03780)
 00h  8 BYTEs	user name
 08h 15 BYTEs	node ID
 17h  3 BYTEs	unique portion of Ethernet address
 1Ah	BYTE	Who group number
 1Bh	WORD	service mask (see #03779)
 1Dh	DWORD	serial number
 21h	BYTE	maximum concurrent users with same serial number allowed on net
 22h	BYTE	chat mask (see #03781)
 23h	BYTE	internal system bits (see #03782)
 24h  9 BYTEs	version number in format MM.mm.xxx
 2Dh	BYTE	number of shared directories
 2Eh	BYTE	number of shared printer queues

Bitfields for 10NET chat mask:
Bit(s)	Description	(Table 03781)
 0	chat permitted
 1	bell enabled
 2	chat keyboard initiated
 3	in INT 16 handler
 4	in Get Input
 5	display has timed out
 6	chat is idle

Bitfields for 10NET internal system bits:
Bit(s)	Description	(Table 03782)
 0	submit permitted
 1	submit initiated
 2	submit executing
 3	internal client call/chat/spool/autospool
 4	in spool termination
 5	print permitted
 6	waiting for keyboard input

Top

6F9501 - INT 6F - 10NET v5.0 - GET SHARED DEVICE ENTRY

INT 6F - 10NET v5.0 - GET SHARED DEVICE ENTRY
	AX = 9501h
	BX = zero-based index
	DS:SI -> server's node ID
	ES:DI -> buffer for shared device structure (see #03783)
Return: CF clear if successful
	CF set on error
	    AX = status (see #03740)
SeeAlso: AX=1501h,AX=9502h,AX=9503h,AX=9504h

Format of 10NET shared device structure:
Offset	Size	Description	(Table 03783)
 00h  8 BYTEs	alias
 08h	BYTE	type (02h modem, 03h print queue, 04h directory)
 09h	BYTE	access rights
		bit 0: read
		bit 1: write
		bit 2: create
 0Ah  8 BYTEs	password
 12h 32 BYTEs	comment
---directory---
 32h 64 BYTEs	pathname of shared directory
---print queue---
 32h	BYTE	notification bit mask (see #03784)
 33h	BYTE	job control bit mask (see #03785)
 34h	WORD	number of days to retain file
 36h	WORD	test print length
 38h	BYTE	number of copies to print
 39h	BYTE	compression algorithm
 3Ah	BYTE	tab width (00h = don't expand)
 3Bh	BYTE	priority
 3Ch	WORD	time to open queue (FFFFh = always)
 3Eh	WORD	time to close queue
 40h	WORD	pause following queue switch, in clock ticks
 42h	WORD	pause between print jobs, in clock ticks
 44h	BYTE	associate queue file existence mask
		bit 0: queue switch file exists
		bit 1: initiate file exists
		bit 2: abort file exists
 45h  6 BYTEs	character sequence for page eject
 4Bh	BYTE	status of print queue
		bit 0: queue is closed
 4Ch	WORD	number of jobs on queue
 4Eh	WORD	offset of next print job to be dispatched (FFFFh = none)
 50h	BYTE	number of print devices in printer pool
 51h	WORD	offset of first print device structure (FFFFh if empty)

Bitfields for notification flags:
Bit(s)	Description	(Table 03784)
 0	user at print start
 1	operator at start, with reply
 2	user at print completion
 3	operator at completion, with reply
 4	user on queue switch
 5	operator on queue switch, with reply
 6	user on print error

Bitfields for 10NET job control mask:
Bit(s)	Description	(Table 03785)
 0	print banner page
 1	eject page at end of job
 2	mark as "held" (queue but don't print)
 3	rush job (queue at top)
 4	overwrite file with zeros before deletion
 5	hyperspool if possible

Top

6F9502 - INT 6F - 10NET v5.0 - SET SHARED DEVICE ENTRY

INT 6F - 10NET v5.0 - SET SHARED DEVICE ENTRY
	AX = 9502h
	DS:SI -> server's node ID
	ES:DI -> shared device structure (see #03783)
Return: CF clear if successful
	CF set on error
	    AX = status (see #03740)
SeeAlso: AX=1502h,AX=9501h,AX=9503h,AX=9504h

Top

6F9503 - INT 6F - 10NET v5.0 - DELETE SHARED DEVICE

INT 6F - 10NET v5.0 - DELETE SHARED DEVICE
	AX = 9503h
	BX = zero-based index
	DS:SI -> server's node ID
Return: CF clear if successful
	CF set on error
	    AX = status (see #03740)
SeeAlso: AX=1503h,AX=9501h,AX=9502h,AX=9504h

Top

6F9504 - INT 6F - 10NET v5.0 - ENUMERATE USERS OF SHARED DEVICE

INT 6F - 10NET v5.0 - ENUMERATE USERS OF SHARED DEVICE
	AX = 9504h
	BX = zero-based shared device index
	CX = zero-based user index
	DS:SI -> server's node ID
Return: CF clear if successful
	    ES:DI -> node ID of the CX'th user of the BX'th device
	CF set on error
	    AX = status (see #03740)
SeeAlso: AX=9501h,AX=9502h,AX=9503h

Top

6F99 - INT 6F - 10NET v5.0 - AUDIT

INT 6F - 10NET v5.0 - AUDIT
	AH = 99h
	DS:SI -> server's node ID
	ES:DI -> data to be appended to audit trail file (max 106 bytes)
Return: CF clear if successful
	CF set on error
	    AX = status (see #03740)
SeeAlso: AH=19h,AH=9Ch

Top

6F9C - INT 6F - 10NET v5.0 - GET LOGIN LIST

INT 6F - 10NET v5.0 - GET LOGIN LIST
	AH = 9Ch
	BX = zero-based index
Return: CF clear if successful
	    DS:DI -> BX'th node ID that caller's machine is logged into
	CF set on error
	    AX = status (see #03740)

Top

Home Interrupt Index: by Category by Number TOC: by Order Top