INTERRUP.

Interrupt List Release 61 Last change 16jul00
Copyright (c) 1989-1999,2000 Ralf Brown

Index for interrupt INT 62

62 - INT 62 - reserved for user interrupt

INT 62 - reserved for user interrupt

Top

62 - INT 62 - Adaptec and OMTI controllers - DRIVE 0 DATA

INT 62 - Adaptec and OMTI controllers - DRIVE 0 DATA
Notes:	this vector stores the third four bytes of the parameter table for
	  hard disk 0
SeeAlso: INT 60"Adaptec",INT 61"Adaptec",INT 63"Adaptec"

Top

62 - INT 62 - TI Professional PC - OPTION ROM DATA AREA POINTER (NOT A VECTOR!)

INT 62 - TI Professional PC - OPTION ROM DATA AREA POINTER (NOT A VECTOR!)
Desc:	the low word of this vector contains the segment of the RAM data area
	  to be used by the expansion ROM at F400h:2000h, and the high word
	  contains the length of the data area; this segment and size are
	  both set to 0000h if no ROM is installed at F400h:2000h
SeeAlso: INT 61"TI Professional PC",INT 63"TI Professional"
SeeAlso: INT 66"TI Professional PC"

Top

62 - INT 62 - HP 95LX - USED BY CALCULATOR

INT 62 - HP 95LX - USED BY CALCULATOR
SeeAlso: INT 60/DI=0104h"HP 95LX"

Top

62 - INT 62 - MS SQL Server/Sybase DBLIBRARY interface - ???

INT 62 - MS SQL Server/Sybase DBLIBRARY interface - ???
	AH = function (00h to 07h)
	CX = FFFEh
	DX = FFFFh
	???
Return: ???
InstallCheck:	test for the string "DBLIBRARY" two bytes past the interrupt
	  handler
SeeAlso: AH=08h"SQL"
Index:	installation check;MS SQL Server|installation check;Sybase DBLIBRARY

Top

62 - INT 62 - MPAUSE - ???

INT 62 - MPAUSE - ???
	details not yet avialable
Program: MPAUSE is a program by Manfred Michael which appeared in the German
	 _EGA-Handbuch_ from  m&t-Verlag

Top

62 - INT 62 - XFS v1.76 - FILTERED PACKET DRIVER API

INT 62 - XFS v1.76 - FILTERED PACKET DRIVER API
Program: XFS is a shareware Network File System client by Robert Juhasz
Desc:	XFS requires a packet driver to operate.  Since it does redirections,
	  etc., it provides its own packet driver entry point, changing the
	  signature string of the original packet driver to "XKT DRVR" so that
	  it will no longer be found by the packet driver installation check
InstallCheck:	scan for the signature string "PKT DRVR" three bytes past the
	  interrupt handler (the same as that for the packet driver
	  specification)
Range:	INT 61 to INT 66, selected by scanning for two consecutive free
	  vectors and hooking the second
SeeAlso: INT 60"Packet Driver Specification",INT 61"XFS"

Top

62 - INT 62 - PC-DRAFT - PRIMARY DISPLAY DRIVER

INT 62 - PC-DRAFT - PRIMARY DISPLAY DRIVER
	???
Return: ???
Program: PC-DRAFT is a powerful CAD environment by rhv.
SeeAlso: INT 64"PC-DRAFT",INT 65"PC-DRAFT",INT 66"PC-DRAFT",INT 67"PC-DRAFT"

Top

6200 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET PHYSICAL HARDWARE ADDRESS

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET PHYSICAL HARDWARE ADDRESS
	AH = 00h
	DS:DX -> 6-byte buffer for address
Return: AX = length of hardware address???
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=01h"ETHDEV",AH=04h"ETHDEV",AH=09h"ETHDEV",AH=0Eh"ETHDEV"
SeeAlso: AH=14h"ETHDEV",AH=18h"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h"BW-TCP",INT 64/AH=01h"BW-NFS"

Top

620000 - INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCATE" - CREATE VIRTUAL VIDEO PAGE

INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCATE" - CREATE VIRTUAL VIDEO PAGE
	AX = 0000h
	BX = page number (0000h-003Fh)
Return: AX = status (0000h,0001h,0007h,0008h) (see #03473)
Program: FGDRIVER is the external video driver for the shareware
	  Fastgraph/Light by Ted Gruber Software
InstallCheck:	test for the signature "FG" ten bytes beyond the start of the
	  interrupt handler
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	The amount of memory required by the virtual video page depends on the
	  current video mode
SeeAlso: AX=0001h,AX=0002h,AX=0003h,AX=0038h
Index:	installation check;Fastgraph/Light

(Table 03473)
Values for FGDRIVER status:
 0000h	successful
 0001h	specified page is a physical or logical page
 0007h	virtual page created/released, but memory control blocks corrupted
 0008h	not enough memory
 0009h	attempt to free a page which was never created
 FFFCh	insufficient memory
 FFFDh	page already created, or exists as physical or virtual page
 FFFEh	invalid page number
 FFFFh	memory manager not initialized
SeeAlso: #03474

(Table 03474)
Values for FGDRIVER functions (by driver version):
Name		v1.10	v3.03	v4.02
 FG_ALLOCATE	0042h	0000h	0000h
 FG_ALLOCCMS	009Dh	0001h	0001h
 FG_ALLOCEMS	009Eh	0002h	0002h
 FG_ALLOCXMS	009Fh	0003h	0003h
 FG_AUTOMODE	0004h	0004h	0004h
 FG_BESTMODE	0003h	0005h	0005h
 FG_BOX		00A2h	0006h	0006h
 FG_BOXDEPTH	00A3h	0007h	0007h
 FG_BOXX	 --	0008h	0008h
 FG_BUTTON	0078h	0009h	0009h
 FG_CAPSLOCK	0070h	000Ah	000Ah
 FG_CHGATTR	0035h	000Bh	000Bh
 FG_CHGTEXT	0036h	000Ch	000Ch
 FG_CIRCLE	0030h	000Dh	000Dh
 FG_CIRCLEF	 --	000Eh	000Eh
 FG_CLIPMAP	 --	 --	000Fh
 FG_CLIPMASK	0052h	000Fh	0010h
 FG_CLPIMAGE	004Ah	0010h	0011h
 FG_CLPRECT	002Bh	0011h	0012h
 FG_COLORS	 --	 --	0013h
 FG_COPYPAGE	005Fh	0012h	0014h
 FG_CURSOR	0007h	0013h	0015h
 FG_DASH	0027h	0014h	0016h
 FG_DASHREL	0028h	0015h	0017h
 FG_DEFCOLOR	0014h	0016h	0018h
 FG_DEFPAGES	 --	0017h	0019h
 FG_DISPFILE	004Fh	0018h	001Ah
 FG_DISPLAY	004Dh	0019h	001Bh
 FG_DISPLAYP	004Eh	001Ah	001Ch
 FG_DISPPCX	0060h	 --	 --
 FG_DRAW	0025h	001Bh	001Dh
 FG_DRAWMAP	0047h	001Ch	001Eh
 FG_DRAWMASK	0051h	001Dh	001Fh
 FG_DRAWREL	0026h	001Eh	0020h
 FG_DRAWRELX	 --	001Fh	0021h
 FG_DRAWX	 --	0020h	0022h
 FG_DRECT	002Ch	0021h	0023h
 FG_DRWIMAGE	0049h	0022h	0024h
 FG_EGACHECK	0005h	0023h	0025h
 FG_ELLIPSE	002Dh	0024h	0026h
 FG_ELLIPSEF	 --	0025h	0027h
 FG_ERASE	001Eh	0026h	0028h
 FG_FADEIN	0064h	0027h	0029h
 FG_FADEOUT	0065h	0028h	002Ah
 FG_FILLPAGE	 --	0029h	002Bh
 FG_FINDPAGE	 --	 --	002Ch
 FG_FLICDONE	 --	 --	002Dh
 FG_FLICHEAD	 --	 --	002Eh
 FG_FLICMODE	 --	 --	002Fh
 FG_FLICOPEN	 --	 --	0030h
 FG_FLICPLAY	 --	 --	0031h
 FG_FLICSIZE	 --	 --	0032h
 FG_FLICSKIP	 --	 --	0033h
 FG_FLIPMASK	0054h	002Ah	0034h
 FG_FLOOD	 --	002Bh	0035h
 FG_FLPIMAGE	004Ch	002Ch	0036h
 FG_FONTSIZE	 --	002Dh	0037h
 FG_FREEPAGE	0043h	002Eh	0038h
 FG_GETADDR	0044h	002Fh	0039h
 FG_GETATTR	0037h	0030h	003Ah
 FG_GETBANKS	 --	 --	003Bh
 FG_GETBLOCK	 --	0031h	003Ch
 FG_GETCHAR	0038h	0032h	003Dh
 FG_GETCLIP	 --	 --	003Eh
 FG_GETCLOCK	0099h	0033h	003Fh
 FG_GETCOLOR	0015h	0034h	0040h
 FG_GETDACS	00A4h	0035h	0041h
 FG_GETENTRY	 --	0036h	0042h
 FG_GETHPAGE	0040h	0037h	0043h
 FG_GETIMAGE	0048h	0038h	0044h
 FG_GETINDEX	0016h	0039h	0045h
 FG_GETKEY	006Eh	003Ah	0046h
 FG_GETLINES	0010h	003Bh	0047h
 FG_GETMAP	0046h	003Ch	0048h
 FG_GETMAXX	000Ah	003Dh	0049h
 FG_GETMAXY	000Bh	003Eh	004Ah
 FG_GETMODE	0000h	003Fh	004Bh
 FG_GETPAGE	003Ch	0040h	004Ch
 FG_GETPIXEL	0020h	0041h	004Dh
 FG_GETRGB	001Ch	0042h	004Eh
 FG_GETVIEW	 --	 --	004Fh
 FG_GETVPAGE	003Eh	0043h	0050h
 FG_GETXBOX	 --	 --	0051h
 FG_GETXJOY	0076h	0044h	0052h
 FG_GETXJUST	 --	 --	0053h
 FG_GETXPOS	0021h	0045h	0054h
 FG_GETYBOX	 --	 --	0055h
 FG_GETYJOY	0077h	0046h	0056h
 FG_GETYJUST	 --	 --	0057h
 FG_GETYPOS	0022h	0047h	0058h
 FG_HUSH	008Eh	0048h	0059h
 FG_HUSHNEXT	008Fh	0049h	005Ah
 FG_IMAGEBUF	 --	004Ah	005Bh
 FG_IMAGESIZ	0062h	004Bh	005Ch
 FG_INITEMS	00A0h	004Ch	005Dh
 FG_INITJOY	0075h	004Dh	005Eh
 FG_INITPM	 --	 --	005Fh??? (NOP in v4.02)
 FG_INITXMS	00A1h	004Eh	0060h
 FG_INSIDE	 --	004Fh	0061h
 FG_INTJOY	0079h	0050h	0062h
 FG_INTKEY	006Fh	0051h	0063h
 FG_INVERT	 --	 --	0064h
 FG_JUSTIFY	 --	0052h	0065h
 FG_KBINIT	 --	0053h	0066h
 FG_KBLAST	 --	 --	0067h
 FG_KBRESET	 --	 --	0068h
 FG_KBTEST	 --	0054h	0069h
 FG_LOADPCX	 --	 --	006Ah
 FG_LOCATE	0033h	0055h	006Bh
 FG_MAKEPCX	0061h	0057h	006Ch
 FG_MAKEPPR	 --	0058h	006Dh
 FG_MAKESPR	 --	0059h	006Eh
 FG_MAPRGB	001Dh	005Ah	006Fh
 FG_MEASURE	0098h	005Bh	0070h
 FG_MEMAVAIL	009Bh	005Ch	0071h
 FG_MEMORY	 --	005Dh	0072h
 FG_MOUSE256	 --	 --	0073h
 FG_MOUSEBUT	007Ch	005Eh	0074h
 FG_MOUSECUR	007Eh	005Fh	0075h
 FG_MOUSEFIN	 --	0060h	0076h
 FG_MOUSEINI	007Ah	0061h	0077h
 FG_MOUSELIM	0080h	0062h	0078h
 FG_MOUSEMOV	0081h	0063h	0079h
 FG_MOUSEPOS	007Dh	0064h	007Ah
 FG_MOUSEPTR	007Fh	0065h	007Bh
 FG_MOUSESPD	0082h	0066h	007Ch
 FG_MOUSEVIS	007Bh	0067h	007Dh
 FG_MOVE	0023h	0068h	007Eh
 FG_MOVEREL	0024h	0069h	007Fh
 FG_MUSIC	008Ch	006Ah	0080h
 FG_MUSICB	008Dh	006Bh	0081h
 FG_NUMLOCK	0072h	006Ch	0082h
 FG_PACK	 --	 --	0083h
 FG_PAGESIZE	 --	006Dh	0084h
 FG_PAINT	002Fh	006Eh	0085h
 FG_PALETTE	0017h	006Fh	0086h
 FG_PALETTES	0018h	0070h	0087h
 FG_PAN		0066h	0071h	0088h
 FG_PATTERN	0050h	0072h	0089h
 FG_PCXHEAD	 --	0073h	008Ah
 FG_PCXMODE	 --	0074h	008Bh
 FG_PCXPAL	 --	 --	008Ch
 FG_PCXRANGE	 --	 --	008Dh
 FG_PLAYING	0091h	0075h	008Eh
 FG_POINT	001Fh	0076h	008Fh
 FG_POINTX	 --	0077h	0090h
 FG_POLYEDGE	 --	 --	0091h
 FG_POLYFILL	 --	0078h	0092h
 FG_POLYGON	002Eh	0079h	0093h
 FG_POLYLINE	 --	007Ah	0094h
 FG_POLYOFF	 --	007Bh	0095h
 FG_PRINT	 --	007Ch	0096h
 FG_PRINTC	 --	 --	0097h
 FG_PUTBLOCK	 --	007Dh	0098h
 FG_PUTIMAGE	 --	007Eh	0099h
 FG_QUIET	0090h	007Fh	009Ah
 FG_RECT	002Ah	0080h	009Bh
 FG_RESET	0006h	0081h	009Ch
 FG_RESIZE	0045h	0082h	009Dh
 FG_RESTORE	005Bh	0083h	009Eh
 FG_RESUME	0092h	0084h	009Fh
 FG_REVIMAGE	004Bh	0085h	00A0h
 FG_REVMASK	0053h	0086h	00A1h
 FG_SAVE	 --	0087h	00A2h
 FG_SCALE	 --	 --	00A3h
 FG_SCRLOCK	0074h	0088h	00A4h
 FG_SCROLL	0067h	0089h	00A5h
 FG_SETATTR	0019h	008Ah	00A6h
 FG_SETBANKS	 --	 --	00A7h
 FG_SETCAPS	0071h	008Bh	00A8h
 FG_SETCLIP	0029h	008Ch	00A9h
 FG_SETCOLOR	001Ah	008Dh	00AAh
 FG_SETDACS	00A5h	008Eh	00ABh
 FG_SETENTRY	 --	008Fh	00ACh
 FG_SETFUNC	009Ch	0090h	00ADh
 FG_SETHPAGE	0041h	0091h	00AEh
 FG_SETLINES	0011h	0092h	00AFh
 FG_SETMODE	0001h	0093h	00B0h
 FG_SETNUM	0073h	0094h	00B1h
 FG_SETPAGE	003Dh	0095h	00B2h
 FG_SETRGB	001Bh	0096h	00B3h
 FG_SETVIEW	 --	 --	00B5h
 FG_SETVPAGE	003Fh	0098h	00B6h
 FG_SHEAR	 --	 --	00B7h
 FG_SHOWFLIC	 --	 --	00B8h
 FG_SHOWPCX	 --	009Ah	00B9h
 FG_SHOWPPR	 --	009Bh	00BAh
 FG_SHOWSPR	 --	009Ch	00BBh
 FG_SOUND	0088h	009Dh	00BCh
 FG_SOUNDS	0089h	009Eh	00BDh
 FG_SPLIT	 --	 --	00BEh
 FG_STALL	0097h	009Fh	00BFh
 FG_SUSPEND	0093h	00A0h	00C0h
 FG_SVGAINIT	 --	00A1h	00C1h
 FG_SVGASTAT	 --	00A2h	00C2h
 FG_SVGAVER	 --	00A3h	00C3h
 FG_TCDEFINE	 --	00A4h	00C4h
 FG_TCMASK	005Eh	00A5h	00C5h
 FG_TCXFER	005Dh	00A6h	00C6h
 FG_TESTMODE	0002h	00A7h	00C7h
 FG_TEXT	0032h	00A8h	00C8h
 FG_TEXTC	 --	 --	00C9h
 FG_TRANSFER	005Ch	00A9h	00CAh
 FG_UNPACK	 --	 --	00CBh
 FG_VBADDR	 --	 --	00CCh
 FG_VBALLOC	 --	 --	00CDh
 FG_VBCLOSE	 --	 --	00CEh
 FG_VBCOPY	 --	 --	00CFh
 FG_VBCUT	 --	 --	00D0h
 FG_VBDEFINE	 --	 --	00D1h
 FG_VBFREE	 --	 --	00D2h
 FG_VBHANDLE	 --	 --	00D3h
 FG_VBINIT	 --	 --	00D4h
 FG_VBOPEN	 --	 --	00D5h
 FG_VBPASTE	 --	 --	00D6h
 FG_VBTCCOPY	 --	 --	00D7h
 FG_VBTCXFER	 --	 --	00D8h
 FG_VBUNDEF	 --	 --	00D9h
 FG_VGASTATE	 --	 --	00DAh
 FG_VOICE	008Ah	00AAh	00DBh
 FG_VOICES	008Bh	00ABh	00DCh
 FG_WAITFOR	0096h	00ACh	00DDh
 FG_WAITKEY	006Dh	00ADh	00DEh
 FG_WAITVR	 --	00AEh	00DFh
 FG_WHERE	0034h	00AFh	00E0h
 FG_XALPHA	000Ch	00B0h	00E1h
 FG_XCONVERT	000Eh	00B1h	00E2h
 FG_XVIEW	 --	 --	00E3h
 FG_YALPHA	000Dh	00B2h	00E4h
 FG_YCONVERT	000Fh	00B3h	00E5h
 FG_YVIEW	 --	 --	00E6h
SeeAlso: #03473

Top

620001 - INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCCMS" - CREATE LOGICAL VIDEO PAGE (CONV)

INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCCMS" - CREATE LOGICAL VIDEO PAGE (CONV)
	AX = 0001h
	BX = page number (0001h-003Fh)
Return: AX = status (0000h,FFFCh,FFFDh,FFFEh) (see #03473)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	The only operation which is allowed on logical pages is "FG_COPYPAGE"
	  (see AX=0014h)
SeeAlso: AX=0000h,AX=0002h,AX=0003h,AX=0014h,AX=0038h

Top

620002 - INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCEMS" - CREATE LOGICAL VIDEO PAGE (EMS)

INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCEMS" - CREATE LOGICAL VIDEO PAGE (EMS)
	AX = 0002h
	BX = page number (0001h-003Fh)
Return: AX = status (0000h,FFFCh,FFFDh,FFFEh) (see #03473)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	You must first call "FG_INITEMS" (see AX=005Dh) before using this
	  function
	The only operation which is allowed on logical pages is "FG_COPYPAGE"
	  (see AX=0014h)
SeeAlso: AX=0000h,AX=0001h,AX=0003h,AX=0014h,AX=0038h,AX=005Dh

Top

620003 - INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCXMS" - CREATE LOGICAL VIDEO PAGE (XMS)

INT 62 u - FGDRIVER v3.03+ - "FG_ALLOCXMS" - CREATE LOGICAL VIDEO PAGE (XMS)
	AX = 0003h
	BX = page number (0001h-003Fh)
Return: AX = status (0000h,FFFCh,FFFDh,FFFEh) (see #03473)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	You must first call "FG_INITXMS" (see AX=0060h) before using this
	  function
	The only operation which is allowed on logical pages is "FG_COPYPAGE"
	  (see AX=0014h)
SeeAlso: AX=0000h,AX=0001h,AX=0002h,AX=0014h,AX=0038h,AX=0060h

Top

620004 - INT 62 u - FGDRIVER 1.10,3.03+ - "FG_AUTOMODE" - GET VIDEO MODE W/MOST FEATURES

INT 62 u - FGDRIVER 1.10,3.03+ - "FG_AUTOMODE" - GET VIDEO MODE W/MOST FEATURES
	AX = 0004h
Return: AX = proposed video mode number (see #03500 at AX=00B0h)
Program: FGDRIVER is the external video driver for the shareware
	  Fastgraph/Light by Ted Gruber Software
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0005h,AX=004Bh,AX=00B0h,AX=00C1h,AX=00C7h

Top

620005 - INT 62 u - FGDRIVER v3.03+ - "FG_BESTMODE" - GET BEST VIDEO MODE GIVEN RESOLUTN

INT 62 u - FGDRIVER v3.03+ - "FG_BESTMODE" - GET BEST VIDEO MODE GIVEN RESOLUTN
	AX = 0005h
	BX = horizontal resolution
	CX = vertical resolution
	DX = number of video pages required (both physical and virtual)
Return: AX = proposed video mode number or FFFFh if no matching video mode
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	You must first call "FG_SVGAINIT" (see AX=00C1h) to get SVGA video
	  modes
SeeAlso: AX=0004h,AX=004Bh,AX=00B0h,AX=00C1h,AX=00C7h

Top

620006 - INT 62 u - FGDRIVER v3.03+ - "FG_BOX" - DRAW UNFILLED RECTANGLE

INT 62 u - FGDRIVER v3.03+ - "FG_BOX" - DRAW UNFILLED RECTANGLE
	AX = 0006h
	BX = left column
	CX = right column
	DX = top row
	SI = bottom row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	The rectangle is drawn in screen space, respecting the clipping region,
	  with edges of the width specified with "FG_BOXDEPTH" (see AX=0007h)
	  (default = 1 is set by "FG_SETMODE")
	This function has no effect in text modes
SeeAlso: AX=0007h,AX=0008h,AX=000Ch,AX=0016h,AX=001Dh,AX=0026h,AX=0051h
SeeAlso: AX=0055h,AX=008Fh

Top

620007 - INT 62 u - FGDRIVER v3.03+ - "FG_BOXDEPTH" - SET RECTANGLE BORDER WIDTH

INT 62 u - FGDRIVER v3.03+ - "FG_BOXDEPTH" - SET RECTANGLE BORDER WIDTH
	AX = 0007h
	BX = width of left and right edges in pixels (> 0)
	CX = width of top and bottom edges in pixels (> 0)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0006h,AX=0008h,AX=0051h,AX=0055h

Top

620008 - INT 62 u - FGDRIVER v3.03+ - "FG_BOXX" - XOR HOLLOW RECTANGLE

INT 62 u - FGDRIVER v3.03+ - "FG_BOXX" - XOR HOLLOW RECTANGLE
	AX = 0008h
	BX = left column
	CX = right column
	DX = top row
	SI = bottom row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	The rectangle is XORed into screen space, respecting the clipping
	  region, with edges of the width specified with "FG_BOXDEPTH"
	  (see AX=0007h) (default = 1 is set by "FG_SETMODE")
	This function has no effect in text modes
SeeAlso: AX=0006h,AX=0007h,AX=0021h,AX=0022h,AX=0051h,AX=0055h,AX=0090h

Top

620009 - INT 62 u - FGDRIVER v3.03+ - "FG_BUTTON" - GET JOYSTICK BUTTON STATE

INT 62 u - FGDRIVER v3.03+ - "FG_BUTTON" - GET JOYSTICK BUTTON STATE
	AX = 0009h
	BX = joystick number (0001h or 0002h)
Return: AX = button states
	    bit 0: top button pressed
	    bit 1: bottom button pressed
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0052h,AX=0056h,AX=005Eh,AX=0062h,AX=0077h

Top

62000A - INT 62 u - FGDRIVER v3.03+ - "FG_CAPSLOCK" - GET STATE OF CAPSLOCK KEY

INT 62 u - FGDRIVER v3.03+ - "FG_CAPSLOCK" - GET STATE OF CAPSLOCK KEY
	AX = 000Ah
Return: AX = CapsLock state (0000h off, 0001h on)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0082h,AX=00A4h,AX=00A8h,AX=00B1h

Top

62000B - INT 62 u - FGDRIVER v3.03+ - "FG_CHGATTR" - APPLY CURRENT TEXT ATTRIB TO CHARS

INT 62 u - FGDRIVER v3.03+ - "FG_CHGATTR" - APPLY CURRENT TEXT ATTRIB TO CHARS
	AX = 000Bh
	BX = number of characters to recolor
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in graphics modes
	Starting at the current text cursor position, the specified number of
	  characters have their attributes to the current text attribute
SeeAlso: AX=000Ch,AX=003Ah,AX=00A6h

Top

62000C - INT 62 u - FGDRIVER v3.03+ - "FG_CHGTEXT" - DISPLAY STRING AT CURSOR POSITION

INT 62 u - FGDRIVER v3.03+ - "FG_CHGTEXT" - DISPLAY STRING AT CURSOR POSITION
	AX = 000Ch
	CX = length of string
	ES:BX -> string to be displayed
Return: text cursor updated
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in graphics modes
SeeAlso: AX=000Bh,AX=0096h

Top

62000D - INT 62 u - FGDRIVER v3.03+ - "FG_CIRCLE" - DRAW UNFILLED CIRCLE

INT 62 u - FGDRIVER v3.03+ - "FG_CIRCLE" - DRAW UNFILLED CIRCLE
	AX = 000Dh
	BX = radius in horizontal screen space units (> 0)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	The circle is drawn in screen space, centered at the current graphics
	  cursor position
	This call is ignored in text modes
SeeAlso: AX=0006h,AX=0008h,AX=000Eh,AX=0026h,AX=0093h

Top

62000E - INT 62 u - FGDRIVER v3.03+ - "FG_CIRCLEF" - DRAW FILLED CIRCLE

INT 62 u - FGDRIVER v3.03+ - "FG_CIRCLEF" - DRAW FILLED CIRCLE
	AX = 000Eh
	BX = radius in horizontal screen space units (> 0)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0008h,AX=000Dh,AX=0027h,AX=0092h

Top

62000F - INT 62 u - FGDRIVER v4.02 - "FG_CLIPMAP" - DISPLAY CLIPPED IMAGE (MODE-INDEP)

INT 62 u - FGDRIVER v4.02 - "FG_CLIPMAP" - DISPLAY CLIPPED IMAGE (MODE-INDEP)
	AX = 000Fh
	ES:BX -> bitmap
	CX = width
	DX = height
Desc:	display a mode-independent bitmap, showing only the portion within
	  the current clipping limits
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes and in native EGA and VGA graphics
	  modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
SeeAlso: AX=0011h,AX=001Fh,AX=0034h,AX=0086h,AX=00A9h,AX=00C5h

Top

620010 - INT 62 u - FGDRIVER v4.02 - "FG_CLIPMASK" - DISPLAY CLIPPED IMAGE (MASKING MAP)

INT 62 u - FGDRIVER v4.02 - "FG_CLIPMASK" - DISPLAY CLIPPED IMAGE (MASKING MAP)
	AX = 0010h
	ES:BX -> array containing image stored as a masking map (see #03475)
	CX = number of pixel runs in masking map
	DX = width of masking map in pixels
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes and in native EGA and VGA graphics
	  modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
SeeAlso: AX=0011h,AX=001Fh,AX=0034h,AX=00A1h,AX=00A9h,AX=00C5h

Top

620011 - INT 62 u - FGDRIVER v4.02 - "FG_CLPIMAGE" - DISPLAY CLIPPED IMAGE (BITMAP)

INT 62 u - FGDRIVER v4.02 - "FG_CLPIMAGE" - DISPLAY CLIPPED IMAGE (BITMAP)
	AX = 0011h
	ES:BX -> mode-specific bitmap
	CX = width of bit map in bytes
	DX = height of bit map in pixel rows
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
	The current clipping region is used, extended to a byte boundary
SeeAlso: AX=0010h,AX=0024h,AX=0036h,AX=0044h,AX=00A0h,AX=00A9h,AX=00B9h

Top

620012 - INT 62 u - FGDRIVER v4.02 - "FG_CLPRECT" - DRAW FILLED RECTANGLE IN SCREEN SPCE

INT 62 u - FGDRIVER v4.02 - "FG_CLPRECT" - DRAW FILLED RECTANGLE IN SCREEN SPCE
	AX = 0012h
	BX = screen space column of left edge
	CX = screen space column of right edge
	DX = screen space row of top edge
	SI = screen space row of bottom edge
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
SeeAlso: AX=0006h,AX=0010h,AX=0011h,AX=0023h,AX=009Bh,AX=00A9h

Top

620013 - INT 62 u - FGDRIVER v4.02 - "FG_COLORS" - GET SIMULTANEOUSLY-AVAILABLE COLORS

INT 62 u - FGDRIVER v4.02 - "FG_COLORS" - GET SIMULTANEOUSLY-AVAILABLE COLORS
	AX = 0013h
Return: AX = number of colors available at one time
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)

Top

620014 - INT 62 u - FGDRIVER v4.02 - "FG_COPYPAGE" - TRANSFER VIDEO PAGE CONTENTS

INT 62 u - FGDRIVER v4.02 - "FG_COPYPAGE" - TRANSFER VIDEO PAGE CONTENTS
	AX = 0014h
	BX = source page number (0000h-003Fh)
	CX = destination page number (0000h-003Fh)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	If both source and destination pages are logical pages, they must both
	  be located in the same type (conventional, EMS, XMS) of memory
SeeAlso: AX=009Eh,AX=00A2h,AX=00C6h,AX=00CAh

Top

620015 - INT 62 u - FGDRIVER v4.02 - "FG_CURSOR" - SPECIFY WHETHER TEXT CURSR IS VISIBLE

INT 62 u - FGDRIVER v4.02 - "FG_CURSOR" - SPECIFY WHETHER TEXT CURSR IS VISIBLE
	AX = 0015h
	BX = new state (0000h invisible, 0001h visible)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
SeeAlso: AX=000Ch,AX=0054h,AX=0058h,AX=006Bh,AX=0075h,AX=0079h,AX=007Eh
SeeAlso: AX=00E0h

Top

620016 - INT 62 u - FGDRIVER v4.02 - "FG_DASH" - DRAW DASHED LINE TO ABSOLUTE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_DASH" - DRAW DASHED LINE TO ABSOLUTE POSITION
	AX = 0016h
	BX = endpoint column
	CX = endpoint row
	DX = dash pattern (set bits cause drawn pixels)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The starting point is the current graphics cursor position; the cursor
	  position is updated
SeeAlso: AX=0017h,AX=001Dh,AX=008Fh

Top

620017 - INT 62 u - FGDRIVER v4.02 - "FG_DASHREL" - DRAW DASHED LINE TO RELATVE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_DASHREL" - DRAW DASHED LINE TO RELATVE POSITION
	AX = 0017h
	BX = endpoint column offset
	CX = endpoint row offset
	DX = dash pattern (set bits cause drawn pixels)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The starting point is the current graphics cursor position; the cursor
	  position is updated
SeeAlso: AX=0016h,AX=001Eh,AX=008Fh

Top

620018 - INT 62 u - FGDRIVER v4.02 - "FG_DEFCOLOR" - ASSIGN COLOR VALUE TO COLOR INDEX

INT 62 u - FGDRIVER v4.02 - "FG_DEFCOLOR" - ASSIGN COLOR VALUE TO COLOR INDEX
	AX = 0018h
	BX = color index (0000h-00FFh)
	CX = new color value (0 to maximum color value for current video mode)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes and 256-color graphics modes
SeeAlso: AX=0040h,AX=0045h,AX=00AAh

Top

620019 - INT 62 u - FGDRIVER v4.02 - "FG_DEFPAGES" - DEF SRC/DEST PAGES FOR BLOCK XFERS

INT 62 u - FGDRIVER v4.02 - "FG_DEFPAGES" - DEF SRC/DEST PAGES FOR BLOCK XFERS
	AX = 0019h
	BX = source page
	CX = destination page
Desc:	specify the source and destination SVGA banks for block transfers on
	  extended video pages
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This function is ignored if the video controller does not support
	  extended pages or the current video mode does not allow them
SeeAlso: AX=0014h,AX=00CAh

Top

62001A - INT 62 u - FGDRIVER v4.02 - "FG_DISPFILE" - DISPLAY STORED IMAGE

INT 62 u - FGDRIVER v4.02 - "FG_DISPFILE" - DISPLAY STORED IMAGE
	AX = 001Ah
	ES:BX -> ASCIZ filename
	CX = image width in pixels (> 0)
	DX = image format
	    0000h Fastgraph standard pixel run format
	    0001h packed pixel run format
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The image is displayed with its lower left corner at the current
	  graphics cursor position
SeeAlso: AX=001Bh,AX=001Ch,AX=00B9h,AX=00BAh,AX=00BBh

Top

62001B - INT 62 u - FGDRIVER v4.02 - "FG_DISPLAY" - DISPLAY IMAGE (STD PIXEL RUN FORMAT)

INT 62 u - FGDRIVER v4.02 - "FG_DISPLAY" - DISPLAY IMAGE (STD PIXEL RUN FORMAT)
	AX = 001Bh
	ES:BX -> pixel run map (pairs of bytes: color index, count)
	CX = number of pixel runs to display
	DX = width of image in pixels (> 0)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The image is displayed with its lower left corner at the current
	  graphics cursor position
SeeAlso: AX=001Ah,AX=001Ch,AX=00B9h,AX=00BAh,AX=00BBh

Top

62001C - INT 62 u - FGDRIVER v4.02 - "FG_DISPLAYP" - DISPLAY IMAGE (PACKED PIXEL RUNS)

INT 62 u - FGDRIVER v4.02 - "FG_DISPLAYP" - DISPLAY IMAGE (PACKED PIXEL RUNS)
	AX = 001Ch
	ES:BX -> pixel run map (trios of bytes: colors, count1, count2; colors
		  contains the color for the first run in its high nybble and
		  the color for the second run in its low nybble)
	CX = number of pixel runs to display
	DX = width of image in pixels (> 0)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The image is displayed with its lower left corner at the current
	  graphics cursor position
SeeAlso: AX=001Ah,AX=001Bh,AX=00B9h,AX=00BAh,AX=00BBh

Top

62001D - INT 62 u - FGDRIVER v4.02 - "FG_DRAW" - DRAW SOLID LINE TO ABSOLUTE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_DRAW" - DRAW SOLID LINE TO ABSOLUTE POSITION
	AX = 001Dh
	BX = endpoint column
	CX = endpoint row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes
	The starting point is the current graphics cursor position; the cursor
	  position is updated
SeeAlso: AX=0016h,AX=0020h,AX=0021h,AX=0026h,AX=008Fh,AX=0090h

Top

62001E - INT 62 u - FGDRIVER v4.02 - "FG_DRAWMAP" - DISPLAY MODE-INDEPENDENT BIT MAP

INT 62 u - FGDRIVER v4.02 - "FG_DRAWMAP" - DISPLAY MODE-INDEPENDENT BIT MAP
	AX = 001Eh
	ES:BX -> bitmap (each set bit is pixel drawn in current color)
	CX = width of bitmap in bytes
	DX = height of bitmap in pixel rows
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0011h,AX=0024h,AX=0036h,AX=0044h,AX=0099h,AX=00A0h

Top

62001F - INT 62 u - FGDRIVER v4.02 - "FG_DRAWMASK" - DISPLAY IMAGE (MASKING MAP)

INT 62 u - FGDRIVER v4.02 - "FG_DRAWMASK" - DISPLAY IMAGE (MASKING MAP)
	AX = 001Fh
	ES:BX -> array containing image stored as a masking map (see #03475)
	CX = number of pixel runs in masking map
	DX = width of masking map in pixels
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	This call is ignored in text modes and in native EGA and VGA graphics
	  modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
SeeAlso: AX=0010h,AX=001Fh,AX=00A1h,AX=00A9h

Format of FGDRIVER masking map:
Offset	Size	Description	(Table 03475)
 00h	BYTE	length of first "protect" run (pixels remain unchanged)
 01h	BYTE	length of first "zero" run (pixels set to background color)
 02h	BYTE	length of second "protect" run
 03h	BYTE	length of second "zero" run
	...

Top

620020 - INT 62 u - FGDRIVER v4.02 - "FG_DRAWREL" - DRAW SOLID LINE TO RELATIVE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_DRAWREL" - DRAW SOLID LINE TO RELATIVE POSITION
	AX = 0020h
	BX = endpoint column offset
	CX = endpoint row offset
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The starting point is the current graphics cursor position; the cursor
	  position is updated
SeeAlso: AX=0006h,AX=000Dh,AX=001Dh,AX=0021h,AX=0026h,AX=008Fh

Top

620021 - INT 62 u - FGDRIVER v4.02 - "FG_DRAWRELX" - XOR SOLID LINE TO RELATIVE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_DRAWRELX" - XOR SOLID LINE TO RELATIVE POSITION
	AX = 0021h
	BX = endpoint column offset
	CX = endpoint row offset
Desc:	draw a solid line, XORing each pixel onto the screen
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The starting point is the current graphics cursor position; the cursor
	  position is updated
SeeAlso: AX=0006h,AX=000Dh,AX=001Dh,AX=0020h,AX=0026h,AX=0090h

Top

620022 - INT 62 u - FGDRIVER v4.02 - "FG_DRAWX" - XOR SOLID LINE TO ABSOLUTE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_DRAWX" - XOR SOLID LINE TO ABSOLUTE POSITION
	AX = 0022h
	BX = endpoint column
	CX = endpoint row
Desc:	draw a solid line, XORing each pixel onto the screen
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The starting point is the current graphics cursor position; the cursor
	  position is updated
SeeAlso: AX=001Dh,AX=0021h,AX=008Fh

Top

620023 - INT 62 u - FGDRIVER v4.02 - "FG_DRECT" - DRAW DITHERED RECTANGLE IN SCRN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_DRECT" - DRAW DITHERED RECTANGLE IN SCRN SPACE
	AX = 0023h
	BX = screen space column of left edge
	CX = screen space column of right edge
	DX = screen space row of top edge
	SI = screen space row of bottom edge
	ES:DI -> dithering matrix (video-mode dependent)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0006h,AX=0008h,AX=0013h,AX=003Ch,AX=0089h,AX=009Bh

Top

620024 - INT 62 u - FGDRIVER v4.02 - "FG_DRWIMAGE" - DISPLAY BITMAPPED IMAGE

INT 62 u - FGDRIVER v4.02 - "FG_DRWIMAGE" - DISPLAY BITMAPPED IMAGE
	AX = 0024h
	ES:BX -> video mode-specific bitmap
	CX = width of bitmap in bytes
	DX = height of bitmap in pixel rows
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The image will be drawn with its lower left corner at the current
	  cursor position (either text or graphics)
SeeAlso: AX=0011h,AX=0036h,AX=0044h,AX=0099h,AX=00A0h

Top

620025 - INT 62 u - FGDRIVER v4.02 - "FG_EGACHECK" - GET INFO ABOUT ACTIVE EGA DISPLAY

INT 62 u - FGDRIVER v4.02 - "FG_EGACHECK" - GET INFO ABOUT ACTIVE EGA DISPLAY
	AX = 0025h
Return: AX = number of 64K banks of video memory, or 0000h if no EGA or EGA
	      without an Enhanced Color Display
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00C2h

Top

620026 - INT 62 u - FGDRIVER v4.02 - "FG_ELLIPSE" - DRAW UNFILLED ELLIPSE IN SCRN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_ELLIPSE" - DRAW UNFILLED ELLIPSE IN SCRN SPACE
	AX = 0026h
	BX = horizontal semi-axis length in screen space units
	CX = vertical semi-axis length in screen space units
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The ellipse is centered at the current graphics cursor position
SeeAlso: AX=0006h,AX=000Dh,AX=0027h,AX=008Fh,AX=0093h

Top

620027 - INT 62 u - FGDRIVER v4.02 - "FG_ELLIPSEF" - DRAW FILLED ELLIPSE IN SCREEN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_ELLIPSEF" - DRAW FILLED ELLIPSE IN SCREEN SPACE
	AX = 0027h
	BX = horizontal semi-axis length in screen space units
	CX = vertical semi-axis length in screen space units
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The ellipse is centered at the current graphics cursor position
SeeAlso: AX=0006h,AX=000Eh,AX=0026h,AX=008Fh,AX=0092h

Top

620028 - INT 62 u - FGDRIVER v4.02 - "FG_ERASE" - CLEAR THE ACTIVE VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_ERASE" - CLEAR THE ACTIVE VIDEO PAGE
	AX = 0028h
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function sets each pixel to 0 in graphics modes, each character
	  cell to a blank with a gray foreground attribute in text modes
SeeAlso: AX=0029h,AX=002Bh,AX=0035h

Top

620029 - INT 62 u - FGDRIVER v4.02 - "FG_FADEIN" - FADE IN HIDDEN PAGE

INT 62 u - FGDRIVER v4.02 - "FG_FADEIN" - FADE IN HIDDEN PAGE
	AX = 0029h
	BX = delay (0000h = fastest possible fade-in)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The current hidden page is copied to the current visible page in small
	  random sections to produce a fade-in effect
	This call is ignored in text modes
SeeAlso: AX=0028h,AX=002Ah,AX=002Bh

Top

62002A - INT 62 u - FGDRIVER v4.02 - "FG_FADEOUT" - FADE OUT TO CURRENT COLOR

INT 62 u - FGDRIVER v4.02 - "FG_FADEOUT" - FADE OUT TO CURRENT COLOR
	AX = 002Ah
	BX = delay (0000h = fastest possible fade-out)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The current visible page is filled with pixels of the current color in
	  small random sections to give a fade-out effect
	This call is ignored in text modes
SeeAlso: AX=0028h,AX=0029h,AX=002Bh

Top

62002B - INT 62 u - FGDRIVER v4.02 - "FG_FILLPAGE" - FILL THE ACTIVE VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_FILLPAGE" - FILL THE ACTIVE VIDEO PAGE
	AX = 002Bh
Desc:	fill the active video page with pixels of the current color (graphics
	  modes) or the block character DBh with the current character
	  attributes (text modes)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0028h,AX=0029h,AX=002Ah

Top

62002C - INT 62 u - FGDRIVER v4.02 - "FG_FINDPAGE" - FIND AVAILABLE VIRTUAL/LOGICAL PAGE

INT 62 u - FGDRIVER v4.02 - "FG_FINDPAGE" - FIND AVAILABLE VIRTUAL/LOGICAL PAGE
	AX = 002Ch
Return: AX = first available page number (virtual or logical page)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0028h

Top

62002D - INT 62 u - FGDRIVER v4.02 - "FG_FLICDONE" - CLOSE FLIC FILE

INT 62 u - FGDRIVER v4.02 - "FG_FLICDONE" - CLOSE FLIC FILE
	AX = 002Dh
	ES:BX -> context descriptor (see AX=0030h)
Return: nothing
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=002Eh,AX=0030h

Top

62002E - INT 62 u - FGDRIVER v4.02 - "FG_FLICHEAD" - READ FLI/FLC FILE HEADER

INT 62 u - FGDRIVER v4.02 - "FG_FLICHEAD" - READ FLI/FLC FILE HEADER
	AX = 002Eh
	ES:BX -> FLICHEAD variable pointer record (see #03477)
Return: AX = status (see #03476)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=002Dh,AX=002Fh,AX=0030h,AX=0032h

(Table 03476)
Values for FGDRIVER FLIC processing status:
 0000h	successful
 FFFEh	not an FLI or FLC file
 FFFFh	file not found

Format of FGDRIVER FLICHEAD variable pointer record:
Offset	Size	Description	(Table 03477)
 00h	WORD	segment of ASCIZ FLI/FLC file name
 02h	WORD	offset of ASCIZ FLI/FLC file name
 04h	WORD	segment of buffer for 128-byte file header
 06h	WORD	offset of buffer for 128-byte file header

Top

62002F - INT 62 u - FGDRIVER v4.02 - "FG_FLICMODE" - GET OPTIMAL VIDEO MODE FOR FLI/FLC

INT 62 u - FGDRIVER v4.02 - "FG_FLICMODE" - GET OPTIMAL VIDEO MODE FOR FLI/FLC
	AX = 002Fh
	ES:BX -> 128-byte buffer containing FLI/FLC file header (see AX=002Eh)
Return: AX = optimal 256-color graphics mode number
	    FFFFh if invalid file header
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=002Eh,AX=0030h

Top

620030 - INT 62 u - FGDRIVER v4.02 - "FG_FLICOPEN" - OPEN FLI/FLC FILE

INT 62 u - FGDRIVER v4.02 - "FG_FLICOPEN" - OPEN FLI/FLC FILE
	AX = 0030h
	ES:BX -> FLICOPEN variable pointer record (see #03478)
Return: AX = status (see #03476)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=002Dh,AX=002Eh,AX=002Fh,AX=0030h,AX=0031h,AX=0032h

Format of FGDRIVER FLICOPEN variable pointer record:
Offset	Size	Description	(Table 03478)
 00h	WORD	segment of ASCIZ FLI/FLC file name
 02h	WORD	offset of ASCIZ FLI/FLC file name
 04h	WORD	segment of buffer for 16-byte file context descriptor
 06h	WORD	offset of buffer for 16-byte file context descriptor

Top

620031 - INT 62 u - FGDRIVER v4.02 - "FG_FLICPLAY" - DISPLAY NEXT FRAME(S) IN FLI/FLC

INT 62 u - FGDRIVER v4.02 - "FG_FLICPLAY" - DISPLAY NEXT FRAME(S) IN FLI/FLC
	AX = 0031h
	ES:BX -> context descriptor (see AX=0030h)
	CX = number of frames to display starting at current frame
	DX = control flags (see #03479)
Return: AX = number of frames displayed
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0030h,AX=0033h,AX=00B8h

Bitfields for FGDRIVER FLI/FLC control flags:
Bit(s)	Description	(Table 03479)
 0	skip inter-frame delay specified in FLI/FLC header
 1	display relative to current graphics position
 2	dipslay image from the FG_IMAGEBUF buffer instead of file

Top

620032 - INT 62 u - FGDRIVER v4.02 - "FG_FLICSIZE" - GET IMAGE SIZE

INT 62 u - FGDRIVER v4.02 - "FG_FLICSIZE" - GET IMAGE SIZE
	AX = 0032h
	ES:BX -> FLICSIZE variable pointer record (see #03480)
Return: image height/width buffers updated; height is set to FFFFh on error
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=002Eh,AX=0030h

Format of FGDRIVER FLICSIZE variable pointer record:
Offset	Size	Description	(Table 03480)
 00h	WORD	segment of buffer for 128-byte FLI/FLC file header
 02h	WORD	offset of buffer for 128-byte FLI/FLC file header
 04h	WORD	segment of WORD buffer for image width in pixels
 06h	WORD	offset of WORD buffer for image width in pixels
 08h	WORD	segment of WORD buffer for image height in pixels
 0Ah	WORD	offset of WORD buffer for image height in pixels

Top

620033 - INT 62 u - FGDRIVER v4.02 - "FG_FLICSKIP" - SKIP FRAME(S) IN FLI/FLC FILE

INT 62 u - FGDRIVER v4.02 - "FG_FLICSKIP" - SKIP FRAME(S) IN FLI/FLC FILE
	AX = 0033h
	ES:BX -> context descriptor (see AX=0030h)
	CX = number of frames to skip
	    reset to first frame if skip count is negative
Return: AX = number of frames skipped (may be less than requested if EOF)
	    0000h if resetting to first frame
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0030h,AX=0031h

Top

620034 - INT 62 u - FGDRIVER v4.02 - "FG_FLIPMASK" - DISPLAY INV CLIPPED IMAGE (MASKMAP)

INT 62 u - FGDRIVER v4.02 - "FG_FLIPMASK" - DISPLAY INV CLIPPED IMAGE (MASKMAP)
	AX = 0034h
	ES:BX -> array containing image stored as a masking map (see #03475)
	CX = number of pixel runs in masking map
	DX = width of masking map in pixels
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes and in native EGA and VGA graphics
	  modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
SeeAlso: AX=000Fh,AX=001Fh,AX=0036h,AX=00A1h,AX=00A5h,AX=00C5h

Top

620035 - INT 62 u - FGDRIVER v4.02 - "FG_FLOOD" - FLOOD FILL ARBITRARY CLOSED REGION

INT 62 u - FGDRIVER v4.02 - "FG_FLOOD" - FLOOD FILL ARBITRARY CLOSED REGION
	AX = 0035h
	BX = starting column
	CX = starting row
Desc:	fill the bounded region around the specified point (respecting clipping
	  region) with the currrent color
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is ignored in text modes
SeeAlso: AX=0028h,AX=0085h

Top

620036 - INT 62 u - FGDRIVER v4.02 - "FG_FLPIMAGE" - DISPLAY INV CLIPPED IMAGE (BITMAP)

INT 62 u - FGDRIVER v4.02 - "FG_FLPIMAGE" - DISPLAY INV CLIPPED IMAGE (BITMAP)
	AX = 0036h
	ES:BX -> mode-specific bitmap
	CX = width of bit map in bytes
	DX = height of bit map in pixel rows
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
	The current clipping region is used, extended to a byte boundary
SeeAlso: AX=0011h,AX=0024h,AX=0034h,AX=0044h,AX=00A0h,AX=00A9h,AX=00B9h

Top

620037 - INT 62 u - FGDRIVER v4.02 - "FG_FONTSIZE" - SPECIFY FONT SIZE FOR TEXT OUTPUT

INT 62 u - FGDRIVER v4.02 - "FG_FONTSIZE" - SPECIFY FONT SIZE FOR TEXT OUTPUT
	AX = 0037h
	BX = desired character height in scan lines (8, 14, 16)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored if the current mode is not a VGA or SVGA graphics
	  mode, or the specified character height is not 8, 14, or 16
SeeAlso: AX=0096h

Top

620038 - INT 62 u - FGDRIVER v4.02 - "FG_FREEPAGE" - FREE VIRTUAL OR LOGICAL VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_FREEPAGE" - FREE VIRTUAL OR LOGICAL VIDEO PAGE
	AX = 0038h
	BX = page number (0000h-003Fh)
Return: AX = status (0000h,0001h,0007h,0009h) (see #03473)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0000h,AX=0001h,AX=0002h,AX=0003h

Top

620039 - INT 62 u - FGDRIVER v4.02 - "FG_GETADDR" - GET SEGMENT OF ACTIVE VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_GETADDR" - GET SEGMENT OF ACTIVE VIDEO PAGE
	AX = 0039h
Return: AX = segment of active video page
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0042h,AX=00ACh

Top

62003A - INT 62 u - FGDRIVER v4.02 - "FG_GETATTR" - GET CHARACTER ATTRIB FOR POSITION

INT 62 u - FGDRIVER v4.02 - "FG_GETATTR" - GET CHARACTER ATTRIB FOR POSITION
	AX = 003Ah
	BX = row
	CX = column
Return: AX = character attribute at specified location on active video page
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in graphics modes
SeeAlso: AX=000Bh,AX=003Dh,AX=0040h,AX=00A6h

Top

62003B - INT 62 u - FGDRIVER v4.02 - "FG_GETBANKS" - GET SVGA READ AND WRITE BANKS

INT 62 u - FGDRIVER v4.02 - "FG_GETBANKS" - GET SVGA READ AND WRITE BANKS
	AX = 003Bh
	ES:BX -> GETBANKS variable pointer record (see #03481)
Return: nothing
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00A7h

Format of FGDRIVER GETBANKS variable pointer record:
Offset	Size	Description	(Table 03481)
 00h	WORD	segment of WORD buffer for read bank number
 02h	WORD	offset of WORD buffer for read bank number
 04h	WORD	segment of WORD buffer for write bank number
 06h	WORD	offset of WORD buffer for write bank number

Top

62003C - INT 62 u - FGDRIVER v4.02 - "FG_GETBLOCK" - GRAB RECTANGLE OF DISPLAY

INT 62 u - FGDRIVER v4.02 - "FG_GETBLOCK" - GRAB RECTANGLE OF DISPLAY
	AX = 003Ch
	ES:BX -> buffer for screen contents
	CX = leftmost column
	DX = rightmost column
	SI = top row
	DI = bottom row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	In text modes, coordinates are character positions; in graphics modes,
	  they are defined in screen space, and the left and right edges are
	  adjusted to a byte boundary if necessary
	Use "FG_IMAGESIZ" (see AX=005Ch) to determine the required buffer size
SeeAlso: AX=0044h,AX=005Ch,AX=0098h

Top

62003D - INT 62 u - FGDRIVER v4.02 - "FG_GETCHAR" - GET CHARACTER FOR SCREEN POSITION

INT 62 u - FGDRIVER v4.02 - "FG_GETCHAR" - GET CHARACTER FOR SCREEN POSITION
	AX = 003Dh
	BX = row
	CX = column
Return: AX = character at specified location on active video page
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in graphics modes
SeeAlso: AX=000Bh,AX=003Ah,AX=0096h,AX=00A6h,AX=00C8h

Top

62003E - INT 62 u - FGDRIVER v4.02 - "FG_GETCLIP" - GET CLIPPING REGION IN SCREEN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_GETCLIP" - GET CLIPPING REGION IN SCREEN SPACE
	AX = 003Eh
	ES:BX -> GETCLIP variable pointer record (see #03482)
Return: variables specifed by GETCLIP structure updated
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00CAh

Format of FGDRIVER GETCLIP variable pointer record:
Offset	Size	Description	(Table 03482)
 00h	WORD	segment of WORD buffer for minimum X coordinate (left edge)
 02h	WORD	offset of WORD buffer for minimum X coordinate (left edge)
 04h	WORD	segment of WORD buffer for maximum X coordinate (right edge)
 06h	WORD	offset of WORD buffer for maximum X coordinate (right edge)
 08h	WORD	segment of WORD buffer for minimum Y coordinate (top edge)
 0Ah	WORD	offset of WORD buffer for minimum Y coordinate (top edge)
 0Ch	WORD	segment of WORD buffer for maximum Y coordinate (bottom edge)
 0Eh	WORD	offset of WORD buffer for maximum Y coordinate (bottom edge)

Top

62003F - INT 62 u - FGDRIVER v4.02 - "FG_GETCLOCK" - GET CLOCK TICKS SINCE MIDNIGHT

INT 62 u - FGDRIVER v4.02 - "FG_GETCLOCK" - GET CLOCK TICKS SINCE MIDNIGHT
	AX = 003Fh
Return: DX:AX = number of clock ticks since midnight
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: INT 1A/AH=00h

Top

620040 - INT 62 u - FGDRIVER v4.02 - "FG_GETCOLOR" - GET CURRENT TEXT ATTRIBUTE

INT 62 u - FGDRIVER v4.02 - "FG_GETCOLOR" - GET CURRENT TEXT ATTRIBUTE
	AX = 0040h
Return: AX = current text attribute or color index (graphics modes)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Bh,AX=003Ah,AX=00A6h

Top

620041 - INT 62 u - FGDRIVER v4.02 - "FG_GETDACS" - GET VIDEO DAC CONTENTS

INT 62 u - FGDRIVER v4.02 - "FG_GETDACS" - GET VIDEO DAC CONTENTS
	AX = 0041h
	CX = number of DAC registers to return (0001h to 0100h)
	DX = starting DAC register number (0000h to 00FFh)
	ES:BX -> buffer for DAC red/green/blue triples
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The register number wraps back to zero after FFh
SeeAlso: AX=004Eh,AX=0086h,AX=00ABh

Top

620042 - INT 62 u - FGDRIVER v4.02 - "FG_GETENTRY" - GET PAGE TYPE AND ADDRESS

INT 62 u - FGDRIVER v4.02 - "FG_GETENTRY" - GET PAGE TYPE AND ADDRESS
	AX = 0042h
	ES:BX -> variable pointer record (see #03483)
	CX = page number (00h-3Fh)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	Page addresses are segments for pages stored in conventional memory
	  (including physical and virtual pages), and EMS or XMS handles for
	  pages stored in EMS or XMS
SeeAlso: AX=0000h,AX=00ACh

Format of FGDRIVER GETENTRY variable pointer record:
Offset	Size	Description	(Table 03483)
 00h	WORD	segment of WORD buffer for page address
 02h	WORD	offset of WORD buffer for page address
 04h	WORD	segment of WORD buffer for page type (se #03484)
 06h	WORD	offset of WORD buffer for page type

(Table 03484)
Values for FGDRIVER page type:
 0000h	unallocated
 0001h	physical
 0002h	virtual
 0003h	logical page, stored in expanded memory (EMS)
 0004h	logical page, stored in extended memory (XMS)
 0005h	logical page, stored in conventional memory

Top

620043 - INT 62 u - FGDRIVER v4.02 - "FG_GETHPAGE" - GET CURRENT HIDDEN VIDEO PAGE NUM

INT 62 u - FGDRIVER v4.02 - "FG_GETHPAGE" - GET CURRENT HIDDEN VIDEO PAGE NUM
	AX = 0043h
Return: AX = current hidden video page number (0000h-003Fh)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=004Ch,AX=0050h,AX=00AEh

Top

620044 - INT 62 u - FGDRIVER v4.02 - "FG_GETIMAGE" - STORE IMAGE AS BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_GETIMAGE" - STORE IMAGE AS BITMAP
	AX = 0044h
	ES:BX -> buffer for video mode-specific bitmap
	CX = width of bitmap in bytes
	DX = height of bitmap in pixel rows
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0011h,AX=0024h,AX=0036h,AX=0099h,AX=00A0h

Top

620045 - INT 62 u - FGDRIVER v4.02 - "FG_GETINDEX" - GET COLOR VALUE FOR COLOR INDEX

INT 62 u - FGDRIVER v4.02 - "FG_GETINDEX" - GET COLOR VALUE FOR COLOR INDEX
	AX = 0045h
	BX = color index (0000h to 00FFh)
Return: AX = color value for specified color index
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call returns the value passed to it in text and 256-color
	  graphics modes
SeeAlso: AX=0018h,AX=0040h

Top

620046 - INT 62 u - FGDRIVER v4.02 - "FG_GETKEY" - GET NEXT KEYSTROKE

INT 62 u - FGDRIVER v4.02 - "FG_GETKEY" - GET NEXT KEYSTROKE
	AX = 0046h
	ES:BX -> variable pointer record (see #03485)
Return: (after next keystroke if no typeahead) variables updated
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ah,AX=0063h,AX=0069h,AX=00DEh,INT 16/AH=00h

Format of FGDRIVER GETKEY variable pointer record:
Offset	Size	Description	(Table 03485)
 00h	WORD	segment of BYTE buffer for ASCII keycode
 02h	WORD	offset of BYTE buffer for ASCII keycode
 04h	WORD	segment of BYTE buffer for extended keycode
 06h	WORD	offset of BYTE buffer for extended keycode

Top

620047 - INT 62 u - FGDRIVER v4.02 - "FG_GETLINES" - GET TEXT ROWS FOR CURR VIDEO MODE

INT 62 u - FGDRIVER v4.02 - "FG_GETLINES" - GET TEXT ROWS FOR CURR VIDEO MODE
	AX = 0047h
Return: AX = number of text rows on screen in current video mode
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00AFh,AX=00C2h

Top

620048 - INT 62 u - FGDRIVER v4.02 - "FG_GETMAP" - STORE IMAGE AS MODE-INDEPENDNT BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_GETMAP" - STORE IMAGE AS MODE-INDEPENDNT BITMAP
	AX = 0048h
	ES:BX -> buffer for video mode-independent bitmap
	CX = width of bitmap in bytes
	DX = height of bitmap in pixel rows
Return: each bit in bitmap is set if corresponding pixel is of the current
	  color, cleared otherwise
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0011h,AX=001Eh,AX=0024h

Top

620049 - INT 62 u - FGDRIVER v4.02 - "FG_GETMAXX" - GET MAXIMUM COLUMN IN SCREEN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_GETMAXX" - GET MAXIMUM COLUMN IN SCREEN SPACE
	AX = 0049h
Return: AX = maximum X coordinate in screen space
	    (or character space if in text mode)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=004Ah,AX=00C1h

Top

62004A - INT 62 u - FGDRIVER v4.02 - "FG_GETMAXY" - GET MAXIMUM ROW IN SCREEN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_GETMAXY" - GET MAXIMUM ROW IN SCREEN SPACE
	AX = 004Ah
Return: AX = maximum Y coordinate in screen space
		(or character space if in text mode)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0049h,AX=00C1h

Top

62004B - INT 62 u - FGDRIVER v4.02 - "FG_GETMODE" - GET CURRENT VIDEO MODE NUMBER

INT 62 u - FGDRIVER v4.02 - "FG_GETMODE" - GET CURRENT VIDEO MODE NUMBER
	AX = 004Bh
	ES:BX -> WORD ???
Return: AX = current video mode number
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00B0h

Top

62004C - INT 62 u - FGDRIVER v4.02 - "FG_GETPAGE" - GET ACTIVE VIDEO PAGE NUMBER

INT 62 u - FGDRIVER v4.02 - "FG_GETPAGE" - GET ACTIVE VIDEO PAGE NUMBER
	AX = 004Ch
Return: AX = active video page (0000h-003Fh)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0039h,AX=0042h,AX=0043h,AX=0050h,AX=00B2h

Top

62004D - INT 62 u - FGDRIVER v4.02 - "FG_GETPIXEL" - GET COLOR OF SPECIFIED PIXEL

INT 62 u - FGDRIVER v4.02 - "FG_GETPIXEL" - GET COLOR OF SPECIFIED PIXEL
	AX = 004Dh
	BX = column in screen space
	CX = row in screen space
Return: AX = color value of pixel (0 to num_colors-1)
	    0000h in text modes
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=003Ah,AX=003Dh,AX=008Fh,AX=0090h

Top

62004E - INT 62 u - FGDRIVER v4.02 - "FG_GETRGB" - GET VIDEO DAC REGISTER CONTENTS

INT 62 u - FGDRIVER v4.02 - "FG_GETRGB" - GET VIDEO DAC REGISTER CONTENTS
	AX = 004Eh
	ES:BX -> variable pointer record (see #03486)
	CX = DAC register number
Return: variables updated
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes and CGA/EGA video modes (since
	  they do not use DAC registers)
SeeAlso: AX=0041h,AX=0086h,AX=00ABh

Format of FGDRIVER GETRGB variable pointer record:
Offset	Size	Description	(Table 03486)
 00h	WORD	segment of WORD buffer for red component of DAC register
 02h	WORD	offset of WORD buffer for red component
 04h	WORD	segment of WORD buffer for green component of DAC register
 06h	WORD	offset of WORD buffer for green component
 08h	WORD	segment of WORD buffer for blue component of DAC register
 0Ah	WORD	offset of WORD buffer for blue component

Top

62004F - INT 62 u - FGDRIVER v4.02 - "FG_GETVIEW" - GET VIEWPORT EXTREME LIMITS

INT 62 u - FGDRIVER v4.02 - "FG_GETVIEW" - GET VIEWPORT EXTREME LIMITS
	AX = 004Fh
	ES:BX -> variable pointer record (see #03487)
Return: indicated variables updated
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00B5h

Format of FGDRIVER GETVIEW variable pointer record:
Offset	Size	Description	(Table 03487)
 00h	WORD	segment of WORD buffer for viewport left edge (viewport units)
 02h	WORD	offset of WORD buffer for viewport left edge (viewport units)
 04h	WORD	segment of WORD buffer for viewport right edge (viewport units)
 06h	WORD	offset of WORD buffer for viewport right edge (viewport units)
 08h	WORD	segment of WORD buffer for viewport top edge (viewport units)
 0Ah	WORD	offset of WORD buffer for viewport top edge (viewport units)
 0Ch	WORD	segment of WORD buffer for viewport bottom edge (viewp. units)
 0Eh	WORD	offset of WORD buffer for viewport bottom edge (viewp. units)
 10h	WORD	segment of WORD buffer for viewport left edge (screen space)
 12h	WORD	offset of WORD buffer for viewport left edge (screen space)
 14h	WORD	segment of WORD buffer for viewport right edge (screen space)
 16h	WORD	offset of WORD buffer for viewport right edge (screen space)
 18h	WORD	segment of WORD buffer for viewport top edge (screen space)
 1Ah	WORD	offset of WORD buffer for viewport top edge (screen space)
 1Ch	WORD	segment of WORD buffer for viewport bottom edge (screen space)
 1Eh	WORD	offset of WORD buffer for viewport bottom edge (screen space)

Top

620050 - INT 62 u - FGDRIVER v4.02 - "FG_GETVPAGE" - GET VISIBLE VIDEO PAGE NUMBER

INT 62 u - FGDRIVER v4.02 - "FG_GETVPAGE" - GET VISIBLE VIDEO PAGE NUMBER
	AX = 0050h
Return: AX = visible video page (0000h-003Fh)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0043h,AX=004Ch,AX=00B6h

Top

620051 - INT 62 u - FGDRIVER v4.02 - "FG_GETXBOX" - GET WIDTH OF VERTICAL BOX LINES

INT 62 u - FGDRIVER v4.02 - "FG_GETXBOX" - GET WIDTH OF VERTICAL BOX LINES
	AX = 0051h
Return: AX = width (in pixels) of left and right edges of rectangles
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0006h,AX=0007h,AX=0008h,AX=006Bh

Top

620052 - INT 62 u - FGDRIVER v4.02 - "FG_GETXJOY" - GET HORIZONTAL POSITION OF JOYSTICK

INT 62 u - FGDRIVER v4.02 - "FG_GETXJOY" - GET HORIZONTAL POSITION OF JOYSTICK
	AX = 0052h
	BX = joystick number (0001h or 0002h)
Return: AX = horizontal position of joystick
	    FFFFh if joystick uninitialized or not present
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The actual coordinates are processor- and joystick-dependent
	You must call "FG_INITJOY" (AX=005Eh) before using this function
SeeAlso: AX=0009h,AX=0056h,AX=005Eh,AX=0062h,AX=0077h

Top

620053 - INT 62 u - FGDRIVER v4.02 - "FG_GETXJUST" - GET HORIZONTAL JUSTIFICATION

INT 62 u - FGDRIVER v4.02 - "FG_GETXJUST" - GET HORIZONTAL JUSTIFICATION
	AX = 0053h
Return: AX = string justification
	    0000h strings are centered around current graphics X position
	    0001h strings are right-justified at current graphics X position
	    FFFFh strings are left-justified at current graphics X position
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=006Ch,AX=007Bh

Top

620054 - INT 62 u - FGDRIVER v4.02 - "FG_GETXPOS" - GET GRAPHICS CURSOR COLUMN

INT 62 u - FGDRIVER v4.02 - "FG_GETXPOS" - GET GRAPHICS CURSOR COLUMN
	AX = 0054h
Return: AX = screen space X coordinate of graphics cursor position
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0058h,AX=007Eh,AX=007Fh

Top

620055 - INT 62 u - FGDRIVER v4.02 - "FG_GETYBOX" - GET WIDTH OF HORIZONTAL BOX LINES

INT 62 u - FGDRIVER v4.02 - "FG_GETYBOX" - GET WIDTH OF HORIZONTAL BOX LINES
	AX = 0055h
Return: AX = width (in pixels) of top and bottom edges of rectangles
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0006h,AX=0007h,AX=0008h,AX=0063h

Top

620056 - INT 62 u - FGDRIVER v4.02 - "FG_GETYJOY" - GET VERTICAL POSITION OF JOYSTICK

INT 62 u - FGDRIVER v4.02 - "FG_GETYJOY" - GET VERTICAL POSITION OF JOYSTICK
	AX = 0056h
	BX = joystick number (0001h or 0002h)
Return: AX = vertical position of joystick
	    FFFFh if joystick uninitialized or not present
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The actual coordinates are processor- and joystick-dependent
	You must call "FG_INITJOY" (AX=005Eh) before using this function
SeeAlso: AX=0009h,AX=0052h,AX=005Eh,AX=0062h,AX=0077h

Top

620057 - INT 62 u - FGDRIVER v4.02 - "FG_GETYJUST" - GET VERTICAL JUSTIFICATION

INT 62 u - FGDRIVER v4.02 - "FG_GETYJUST" - GET VERTICAL JUSTIFICATION
	AX = 0057h
Return: AX = string justification
	    0000h strings are centered around current graphics Y position
	    0001h strings have top edge at current graphics Y position
	    FFFFh strings have bottom edge at current graphics Y position
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0053h,AX=0065h

Top

620058 - INT 62 u - FGDRIVER v4.02 - "FG_GETYPOS" - GET GRAPHICS CURSOR ROW

INT 62 u - FGDRIVER v4.02 - "FG_GETYPOS" - GET GRAPHICS CURSOR ROW
	AX = 0058h
Return: AX = screen space Y coordinate of graphics cursor position
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0054h,AX=007Eh,AX=007Fh

Top

620059 - INT 62 u - FGDRIVER v4.02 - "FG_HUSH" - STOP ASYNCHRONOUS SOUND IMMEDIATELY

INT 62 u - FGDRIVER v4.02 - "FG_HUSH" - STOP ASYNCHRONOUS SOUND IMMEDIATELY
	AX = 0059h
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function immediately stops any sounds started with "FG_MUSICB",
	  "FG_SOUNDS", or "FG_VOICES"; it is ignored if no asynchronous sound
	  is playing
SeeAlso: AX=005Ah,AX=0081h,AX=00BDh,AX=00DCh

Top

62005A - INT 62 u - FGDRIVER v4.02 - "FG_HUSHNEXT" - STOP ASYNCHRONOUS SOUND

INT 62 u - FGDRIVER v4.02 - "FG_HUSHNEXT" - STOP ASYNCHRONOUS SOUND
	AX = 005Ah
Program: FGDRIVER is the external video driver for the shareware
	  Fastgraph/Light by Ted Gruber Software
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function stops any sounds started with "FG_MUSICB", "FG_SOUNDS",
	  or "FG_VOICES" after the current repetition completes; it is ignored
	  unless asynchronous sound is continuous
SeeAlso: AX=0059h,AX=0081h,AX=00BDh,AX=00DCh

Top

62005B - INT 62 u - FGDRIVER v4.02 - "FG_IMAGEBUF" - SPECIFY TEMPORARY IMAGE BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_IMAGEBUF" - SPECIFY TEMPORARY IMAGE BUFFER
	AX = 005Bh
	ES:BX -> buffer to be used when creating or displaying GIF/PCX/PPR/SPR
		  images
	CX = size of buffer in bytes or 0000h to use internal buffer
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	Fastgraph's internal buffer is 4096 bytes; this function allows the
	  application to define a larger buffer which will typically speed
	  processing
SeeAlso: AX=006Ch,AX=006Dh,AX=006Eh,AX=00B9h,AX=00BAh,AX=00BBh

Top

62005C - INT 62 u - FGDRIVER v4.02 - "FG_IMAGESIZ" - DETERMINE IMAGE STORAGE REQUIREMENT

INT 62 u - FGDRIVER v4.02 - "FG_IMAGESIZ" - DETERMINE IMAGE STORAGE REQUIREMENT
	AX = 005Ch
	BX = image width in pixels
	CX = image height in pixels
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
Return: DX:AX = size in bytes of mode-specific bitmap for current video mode
SeeAlso: AX=003Ch,AX=0098h

Top

62005D - INT 62 u - FGDRIVER v4.02 - "FG_INITEMS" - INITIALIZE EXPANDED MEMORY USE

INT 62 u - FGDRIVER v4.02 - "FG_INITEMS" - INITIALIZE EXPANDED MEMORY USE
	AX = 005Dh
Return: AX = status
	    0000h successful
	    FFFFh expanded memory manager inaccessible or not installed
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0002h,AX=0060h"v4.02"

Top

62005E - INT 62 u - FGDRIVER v4.02 - "FG_INITJOY" - INITIALIZE JOYSTICK USE

INT 62 u - FGDRIVER v4.02 - "FG_INITJOY" - INITIALIZE JOYSTICK USE
	AX = 005Eh
	BX = joystick number (0001h or 0002h)
Return: AX = status
	    0000h successful
	    FFFFh joystick not connected or no game port
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	Fastgraph assumes that the requested joystick is centered at the time
	  this function is called
SeeAlso: AX=0009h,AX=0052h,AX=0056h,AX=0062h,AX=0077h

Top

62005F - INT 62 u - FGDRIVER v4.02 - "FG_INITPM"??? - (NOT IMPLEMENTED)

INT 62 u - FGDRIVER v4.02 - "FG_INITPM"??? - (NOT IMPLEMENTED)
	AX = 005Fh
	???
Return: ???
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)

Top

620060 - INT 62 u - FGDRIVER v1.10 only - "FG_DISPPCX" - DISPLAY PCX FILE

INT 62 u - FGDRIVER v1.10 only - "FG_DISPPCX" - DISPLAY PCX FILE
	AX = 0060h
	ES:BX -> ASCIZ filename
	CX = flags
	    bit 0: use current palette rather than PCX file's palette
	    bits 1-15 reserved (0)
Return: AX = status
	    0000h success
	    0001h file not found
	    0002h file is not a valid PCX file
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes and Hercules low-resolution graphics
	The image is displayed with its upper left corner at the current
	  graphics cursor position
SeeAlso: AX=00B9h

Top

620060 - INT 62 u - FGDRIVER v4.02 - "FG_INITXMS" - INITIALIZE EXTENDED MEMORY USE

INT 62 u - FGDRIVER v4.02 - "FG_INITXMS" - INITIALIZE EXTENDED MEMORY USE
	AX = 0060h
Return: AX = status
	    0000h successful
	    FFFFh extended memory manager inaccessible or not installed
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0003h,AX=005Dh

Top

620061 - INT 62 u - FGDRIVER v4.02 - "FG_INSIDE" - CHECK IF POINT INSIDE CONVEX POLYGON

INT 62 u - FGDRIVER v4.02 - "FG_INSIDE" - CHECK IF POINT INSIDE CONVEX POLYGON
	AX = 0061h
	ES:BX -> vertex array
	CX = number of vertices
	DX = screen space column of point to test
	SI = screen space row of point to test
Return: AX = result
	    0000h point is outside polygon
	    0001h point is inside polygon
	    undefined if not a convex polygon
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0092h,AX=0093h,AX=0094h

Top

620062 - INT 62 u - FGDRIVER v4.02 - "FG_INTJOY" - GET KEYCODES CORRESP TO JOYSTICK POS

INT 62 u - FGDRIVER v4.02 - "FG_INTJOY" - GET KEYCODES CORRESP TO JOYSTICK POS
	AX = 0062h
	CX = joystick number (0001h or 0002h)
	ES:BX -> variable pointer record (see #03488)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	If the indicated joystick has not been initialized with AX=008Eh, both
	  the button code and joystick position will be set to 00h
	If either button is pressed, a button code of 0Dh is returned;
	  otherwise, a button code of 00h is returned
SeeAlso: AX=0009h,AX=0052h,AX=0046h,AX=005Eh,AX=0077h

Format of FGDRIVER INTJOY variable pointer record:
Offset	Size	Description	(Table 03488)
 00h	WORD	segment of BYTE buffer for button code
 02h	WORD	offset of BYTE buffer for button code
 04h	WORD	segment of BYTE buffer for joystick position
 06h	WORD	offset of BYTE buffer for joystick position

Top

620063 - INT 62 u - FGDRIVER v4.02 - "FG_INTKEY" - GET KEYSTROKE, NO WAIT

INT 62 u - FGDRIVER v4.02 - "FG_INTKEY" - GET KEYSTROKE, NO WAIT
	AX = 0063h
	ES:BX -> variable pointer record (see #03489)
Return: variables updated
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	If the keyboard buffer is empty, both the ASCII and extended keycodes
	  are set to 00h
SeeAlso: AX=000Ah,AX=0046h,AX=0069h,AX=00DEh,INT 16/AH=01h

Format of FGDRIVER INTKEY variable pointer record:
Offset	Size	Description	(Table 03489)
 00h	WORD	segment of BYTE buffer for ASCII keycode
 02h	WORD	offset of BYTE buffer for ASCII keycode
 04h	WORD	segment of BYTE buffer for extended keycode
 06h	WORD	offset of BYTE buffer for extended keycode

Top

620064 - INT 62 u - FGDRIVER v4.02 - "FG_INVERT" - INVERT ORIENTATION OF BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_INVERT" - INVERT ORIENTATION OF BITMAP
	AX = 0064h
	ES:BX -> bitmap
	CX = width of bitmap in bytes
	DX = height of bitmap in pixel rows
Return: nothing
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)

Top

620065 - INT 62 u - FGDRIVER v4.02 - "FG_JUSTIFY" - SET TEXT OUTPUT JUSTIFICATION

INT 62 u - FGDRIVER v4.02 - "FG_JUSTIFY" - SET TEXT OUTPUT JUSTIFICATION
	AX = 0065h
	BX = horizontal justification
	      (00h centered, 01h right-justified, FFh left-justified)
	CX = vertical justification
	      (00h centered, 01h top of characters, FFh bottom of chars)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ch,AX=0037h,AX=0053h,AX=0057h,AX=0096h

Top

620066 - INT 62 u - FGDRIVER v4.02 - "FG_KBINIT" - ENABLE/DISABLE LOW-LEVEL KBD HANDLER

INT 62 u - FGDRIVER v4.02 - "FG_KBINIT" - ENABLE/DISABLE LOW-LEVEL KBD HANDLER
	AX = 0066h
	BX = new state (0000h disabled, 0001h enabled)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	When the low-level handler is enabled, "FG_GETKEY", "FG_INTKEY",
	  "FG_WAITKEY", and all other functions calling DOS or BIOS keyboard
	  services become unavailable
SeeAlso: AX=0067h,AX=0068h,AX=0069h

Top

620067 - INT 62 u - FGDRIVER v4.02 - "FG_KBLAST" - GET MOST RECENT SCANCODE PROCESSED

INT 62 u - FGDRIVER v4.02 - "FG_KBLAST" - GET MOST RECENT SCANCODE PROCESSED
	AX = 0067h
Return: AX = scancode for keypress most recently processed by FastGraph's
	      low-level keyboard handler, or 0000h if no keys since FG_KBINIT
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0066h,AX=0068h,AX=0069h

Top

620068 - INT 62 u - FGDRIVER v4.02 - "FG_KBRESET" - RESET LOW-LEVEL KEYBOARD HANDLER

INT 62 u - FGDRIVER v4.02 - "FG_KBRESET" - RESET LOW-LEVEL KEYBOARD HANDLER
	AX = 0068h
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0066h,AX=0067h,AX=0069h

Top

620069 - INT 62 u - FGDRIVER v4.02 - "FG_KBTEST" - CHECK WHETHER SPECIFIED KEY PRESSED

INT 62 u - FGDRIVER v4.02 - "FG_KBTEST" - CHECK WHETHER SPECIFIED KEY PRESSED
	AX = 0069h
	BX = scan code of desired key
Return: AX = state
	    0000h key is not pressed
	    0001h key is currently pressed
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The low-level keyboard handler must have been enabled with AX=0066h
SeeAlso: AX=0066h,AX=0067h,INT 16/AH=01h

Top

62006A - INT 62 u - FGDRIVER v4.02 - "FG_LOADPCX" - LOAD .PCX INTO ACTIVE VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_LOADPCX" - LOAD .PCX INTO ACTIVE VIRTUAL BUFFER
	AX = 006Ah
	ES:BX -> ASCIZ filename for PCX image
	CX = control flags
	    bit 0: use current palette, overriding stored .PCX palette
	    bit 1: load at current graphics position, not stored position
	    bit 2: load image from FG_IMAGEBUF buffer instead of .PCX file
Return: AX = status
	    0000h successful
	    0001h file not found
	    0002h not a .PCX file
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=006Ch,AX=00B9h,AX=00D5h

Top

62006B - INT 62 u - FGDRIVER v4.02 - "FG_LOCATE" - SET TEXT-MODE CURSOR POSITION

INT 62 u - FGDRIVER v4.02 - "FG_LOCATE" - SET TEXT-MODE CURSOR POSITION
	AX = 006Bh
	BX = row
	CX = column
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	There are only eight text cursors shared by successive groups of
	  eight video pages (pages 0, 8, 16, ... share one cursor, 1, 9, ...
	  share the second, etc)
SeeAlso: AX=0054h,AX=0058h,AX=007Eh,AX=00E0h

Top

62006C - INT 62 u - FGDRIVER v4.02 - "FG_MAKEPCX" - CREATE PCX FILE FROM SCREEN WINDOW

INT 62 u - FGDRIVER v4.02 - "FG_MAKEPCX" - CREATE PCX FILE FROM SCREEN WINDOW
	AX = 006Ch
	BX = left edge in screen space units
	CX = right edge in screen space units
	DX = top edge in screen space units
	SI = bottom edge in screen space units
	ES:DI -> ASCIZ filename of PCX file to create
Return: AX = status
	    0000h successful
	    0001h file not created
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The PCX file is created from the specified region of the active video
	  page; the left and right edges are adjusted to a byte boundary if
	  necessary
	If the specified file already exists, it is overwritten
	This call is ignored in text and Hercules low-resolution graphics modes
SeeAlso: AX=005Bh,AX=006Dh,AX=006Ah,AX=006Eh,AX=00B9h,AX=00BAh,AX=00BBh

Top

62006D - INT 62 u - FGDRIVER v4.02 - "FG_MAKEPPR" - CREATE PACKED PIXEL RUN FILE

INT 62 u - FGDRIVER v4.02 - "FG_MAKEPPR" - CREATE PACKED PIXEL RUN FILE
	AX = 006Dh
	BX = left edge in screen space units
	CX = right edge in screen space units
	DX = top edge in screen space units
	SI = bottom edge in screen space units
	ES:DI -> ASCIZ filename of PPR file to create
Return: AX = status
	    0000h successful
	    0001h file not created
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The PPR file is created from the specified region of the active video
	  page; the left and right edges are adjusted to byte boundaries if
	  necessary
	If the specified file already exists, it is overwritten
	This call is ignored in text modes
SeeAlso: AX=005Bh,AX=006Ch,AX=006Eh,AX=00B9h,AX=00BAh,AX=00BBh

Top

62006E - INT 62 u - FGDRIVER v4.02 - "FG_MAKESPR" - CREATE STANDARD PIXEL RUN FILE

INT 62 u - FGDRIVER v4.02 - "FG_MAKESPR" - CREATE STANDARD PIXEL RUN FILE
	AX = 006Eh
	BX = left edge in screen space units
	CX = right edge in screen space units
	DX = top edge in screen space units
	SI = bottom edge in screen space units
	ES:DI -> ASCIZ filename of SPR file to create
Return: AX = status
	    0000h successful
	    0001h file not created
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The SPR file is created from the specified region of the active video
	  page; the left and right edges are adjusted to byte boundaries if
	  necessary
	If the specified file already exists, it is overwritten
	This call is ignored in text modes
SeeAlso: AX=005Bh,AX=006Ch,AX=006Dh,AX=00B9h,AX=00BAh,AX=00BBh

Top

62006F - INT 62 u - FGDRIVER v4.02 - "FG_MAPRGB" - MAP COLOR COMPONENTS INTO PALETTE VAL

INT 62 u - FGDRIVER v4.02 - "FG_MAPRGB" - MAP COLOR COMPONENTS INTO PALETTE VAL
	AX = 006Fh
	BX = red component
	CX = green component
	DX = blue component
Return: AX = mode-specific palette value corresponding to specified components
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is only meaningful in 16-color graphics modes
SeeAlso: AX=004Eh,AX=00B3h

Top

620070 - INT 62 u - FGDRIVER v4.02 - "FG_MEASURE" - GET DELAY UNITS PER CLOCK TICK

INT 62 u - FGDRIVER v4.02 - "FG_MEASURE" - GET DELAY UNITS PER CLOCK TICK
	AX = 0070h
Return: AX = delay units per clock tick (processor-dependent)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	These delay units are used by "FG_STALL" (see AX=00BFh)
SeeAlso: AX=00BFh

Top

620071 - INT 62 u - FGDRIVER v4.02 - "FG_MEMAVAIL" - QUERY AMOUNT OF FREE MEMORY

INT 62 u - FGDRIVER v4.02 - "FG_MEMAVAIL" - QUERY AMOUNT OF FREE MEMORY
	AX = 0071h
Return: DX:AX = number of bytes of conventional memory available
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=005Dh,AX=0072h

Top

620072 - INT 62 u - FGDRIVER v4.02 - "FG_MEMORY" - GET SIZE OF VIDEO MEMORY

INT 62 u - FGDRIVER v4.02 - "FG_MEMORY" - GET SIZE OF VIDEO MEMORY
	AX = 0072h
Return: AX = size of video memory in KB
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	You must first call "FG_SVGAINIT" (see AX=00C1h) before using this
	  function
SeeAlso: AX=0071h

Top

620073 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSE256" - DEFINE 256-COLOR MOUSE CURSOR

INT 62 u - FGDRIVER v4.02 - "FG_MOUSE256" - DEFINE 256-COLOR MOUSE CURSOR
	AX = 0073h
	ES:BX -> 512-byte cursor definition
	CX = X offset of hot-spot within mouse cursor
	DX = Y offset of hot-spot within mouse cursor
Return: nothing
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	the cursor definition array consists of 256 bytes defining the 16x16
	  screen mask, followed by another 256 bytes definining the 16x16
	  cursor mask
SeeAlso: AX=0074h,AX=0075h,AX=007Bh

Top

620074 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEBUT" - GET MOUSE BUTTON PRESS/RELEASE CNTS

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEBUT" - GET MOUSE BUTTON PRESS/RELEASE CNTS
	AX = 0074h
	CX = mouse button (1 = left press, 2 = right press, 3 = middle press,
		  -1=left release, -2=right release, -3=middle release)
	ES:BX -> variable pointer record (see #03490)
Return: variables updated
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function returns the count of presses or releases since the last
	  call to this function; if the count is zero, row and column will
	  also be zero
SeeAlso: AX=0075h,AX=0077h,AX=007Ah

Format of FGDRIVER MOUSEBUT variable pointer record:
Offset	Size	Description	(Table 03490)
 00h	WORD	segment of WORD buffer for press/release count
 02h	WORD	offset of WORD buffer for press/release count
 04h	WORD	segment of WORD buffer for screen space col of last press/rls
 06h	WORD	offset of WORD buffer for screen space col of last press/rels
 08h	WORD	segment of WORD buffer for screen space row of last press/rls
 0Ah	WORD	offset of WORD buffer for screen space row of last press/rls

Top

620075 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSECUR" - SPECIFY TEXT-MODE MOUSE CURSOR

INT 62 u - FGDRIVER v4.02 - "FG_MOUSECUR" - SPECIFY TEXT-MODE MOUSE CURSOR
	AX = 0075h
	BX = screen mask
	CX = cursor mask
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in graphics modes
SeeAlso: AX=007Bh,AX=007Dh

Top

620076 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEFIN" - UNHOOK FASTGRAPH MOUSE HANDLER

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEFIN" - UNHOOK FASTGRAPH MOUSE HANDLER
	AX = 0076h
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function should be called before switching back to text mode if
	  "FG_MOUSEINI" was called while in an SVGA graphics mode
SeeAlso: AX=0077h

Top

620077 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEINI" - INITIALIZE MOUSE SUPPORT

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEINI" - INITIALIZE MOUSE SUPPORT
	AX = 0077h
Return: AX = status
	    0002h two-button mouse
	    0003h three-button mouse
	    FFFFh initialization failed
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	After this call, the mouse cursor is invisible
SeeAlso: AX=0076h,AX=0078h,AX=007Ch

Top

620078 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSELIM" - SPECIFY MOUSE CURSOR LIMITS

INT 62 u - FGDRIVER v4.02 - "FG_MOUSELIM" - SPECIFY MOUSE CURSOR LIMITS
	AX = 0078h
	BX = left-most position allowed for mouse cursor
	CX = right-most position allowed
	DX = top-most position allowed
	SI = bottom-most position allowed
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0077h,AX=0079h,INT 33/AX=0007h,INT 33/AX=0008h

Top

620079 - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEMOV" - SET MOUSE CURSOR POSITION

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEMOV" - SET MOUSE CURSOR POSITION
	AX = 0079h
	BX = new column
	CX = new row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function will not move the mouse cursor outside the bounding box
	  specified with AX=009Bh
SeeAlso: AX=0078h,AX=007Ah,INT 33/AX=0004h

Top

62007A - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEPOS" - GET CURRENT MOUSE POSITION

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEPOS" - GET CURRENT MOUSE POSITION
	AX = 007Ah
	ES:BX -> variable pointer record (see #03491)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0079h

Format of FGDRIVER MOUSEPOS variable pointer record:
Offset	Size	Description	(Table 03491)
 00h	WORD	segment of WORD buffer for mouse column
 02h	WORD	offset of WORD buffer for mouse column
 04h	WORD	segment of WORD buffer for mouse row
 06h	WORD	offset of WORD buffer for mouse row
 08h	WORD	segment of WORD buffer for button status
 0Ah	WORD	offset of WORD buffer for button status
Note:	button status: bit 0 = left button, bit 1 = right, bit 2 = middle

Top

62007B - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEPTR" - SPECIFY GRAPH-MODE MOUSE CURSOR

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEPTR" - SPECIFY GRAPH-MODE MOUSE CURSOR
	AX = 007Bh
	ES:BX -> masks (16-byte screen mask followed by 16-byte cursor mask)
	CX = X offset of hot spot from upper left corner
	DX = Y offset of hot spot from upper left corner
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0073h,AX=0075h,INT 33/AX=0009h

Top

62007C - INT 62 u - FGDRIVER v4.02 - "FG_MOUSESPD" - SET MOUSE CURSOR SPEED

INT 62 u - FGDRIVER v4.02 - "FG_MOUSESPD" - SET MOUSE CURSOR SPEED
	AX = 007Ch
	BX = horizontal mickeys per eight pixels of movement (default 16)
	CX = vertical mickeys per eight pixels of movement (default 16)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: INT 33/AX=000Fh,INT 33/AX=001Ah

Top

62007D - INT 62 u - FGDRIVER v4.02 - "FG_MOUSEVIS" - SET MOUSE CURSOR VISIBILITY

INT 62 u - FGDRIVER v4.02 - "FG_MOUSEVIS" - SET MOUSE CURSOR VISIBILITY
	AX = 007Dh
	BX = new state (0000h invisible, 0001h visible)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0077h,INT 33/AX=0001h,INT 33/AX=0002h

Top

62007E - INT 62 u - FGDRIVER v4.02 - "FG_MOVE" - SET GRAPHICS CURSOR POSITION

INT 62 u - FGDRIVER v4.02 - "FG_MOVE" - SET GRAPHICS CURSOR POSITION
	AX = 007Eh
	BX = new column
	CX = new row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0054h,AX=0058h,AX=006Bh,AX=0079h,AX=007Fh,AX=00E0h

Top

62007F - INT 62 u - FGDRIVER v4.02 - "FG_MOVEREL" - ADJUST GRAPHICS CURSOR POSITION

INT 62 u - FGDRIVER v4.02 - "FG_MOVEREL" - ADJUST GRAPHICS CURSOR POSITION
	AX = 007Fh
	BX = column offset
	CX = row offset
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0054h,AX=0058h,AX=007Eh

Top

620080 - INT 62 u - FGDRIVER v4.02 - "FG_MUSIC" - PLAY SERIES OF NOTES

INT 62 u - FGDRIVER v4.02 - "FG_MUSIC" - PLAY SERIES OF NOTES
	AX = 0080h
	ES:BX -> '$'-terminated music string in BASIC PLAY format
Return: after music completed
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored if asynchronous sound (AX=00A5h,AX=00A8h,
	  AX=00AAh) is already in progress
SeeAlso: AX=0081h,AX=00BCh,AX=00DBh

Top

620081 - INT 62 u - FGDRIVER v4.02 - "FG_MUSICB" - PLAY SERIES OF NOTES IN BACKGROUND

INT 62 u - FGDRIVER v4.02 - "FG_MUSICB" - PLAY SERIES OF NOTES IN BACKGROUND
	AX = 0081h
	CX = number of repetitions (negative = continuous play)
	ES:BX -> '$'-terminated music string in BASIC PLAY format
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored if asynchronous sound (AX=00A5h,AX=00A8h,
	  AX=00AAh) is already in progress
SeeAlso: AX=0059h,AX=0081h,AX=00BDh,AX=00DCh

Top

620082 - INT 62 u - FGDRIVER v4.02 - "FG_NUMLOCK" - GET STATE OF NUMLOCK KEY

INT 62 u - FGDRIVER v4.02 - "FG_NUMLOCK" - GET STATE OF NUMLOCK KEY
	AX = 0082h
Return: AX = NumLock state (0000h off, 0001h on)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ah,AX=00A4h,AX=00A8h,AX=00B1h

Top

620083 - INT 62 u - FGDRIVER v4.02 - "FG_PACK" - CONVERT PIXEL-PER-BYTE TO PACKED BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_PACK" - CONVERT PIXEL-PER-BYTE TO PACKED BITMAP
	AX = 0083h
	ES:BX -> variable pointer record (see #03492)
	CX = width of bitmap in pixels
	DX = height of bitmap in pixels
Return: result bitmap buffer updated
SeeAlso: AX=00CBh

Format of FGDRIVER PACK variable pointer record:
Offset	Size	Description	(Table 03492)
 00h	WORD	segment of source (mode-independent) bitmap
 02h	WORD	offset of source (mode-independent) bitmap
 04h	WORD	segment of buffer for result (mode-specific) bitmap
 06h	WORD	offset of buffer for result (mode-specific) bitmap

Top

620084 - INT 62 u - FGDRIVER v4.02 - "FG_PAGESIZE" - GET VIDEO PAGE SIZE FOR CURR MODE

INT 62 u - FGDRIVER v4.02 - "FG_PAGESIZE" - GET VIDEO PAGE SIZE FOR CURR MODE
	AX = 0084h
Return: DX:AX = page size in bytes
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0072h

Top

620085 - INT 62 u - FGDRIVER v4.02 - "FG_PAINT" - FLOOD CLOSED REGION WITH COLOR

INT 62 u - FGDRIVER v4.02 - "FG_PAINT" - FLOOD CLOSED REGION WITH COLOR
	AX = 0085h
	BX = column
	CX = row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function fills an arbitrary closed region around the specified
	  point with the current color; the screen edges are not considered
	  region boundaries
	This call is ignored in text modes
SeeAlso: AX=0035h

Top

620086 - INT 62 u - FGDRIVER v4.02 - "FG_PALETTE" - SET PALETTE / SET VIDEO DAC REGISTER

INT 62 u - FGDRIVER v4.02 - "FG_PALETTE" - SET PALETTE / SET VIDEO DAC REGISTER
	AX = 0086h
---CGA 4-color graphics---
	BX = CGA paletee number
	CX = background color
---CGA 2-color graphics---
	BX ignored
	CX = foreground color
---16-color graphics---
	BX = palette register number
	CX = palette value
---256-color graphics---
	BX = DAC register number
	CX =  DAC value
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is ignored in text modes and Hercules graphics modes
	Few EGA/VGA adapters correctly set the foreground color in CGA mode 6
SeeAlso: AX=0041h,AX=004Eh,AX=0087h,AX=00ABh

Top

620087 - INT 62 u - FGDRIVER v4.02 - "FG_PALETTES" - SET ALL PALETTE REGISTERS

INT 62 u - FGDRIVER v4.02 - "FG_PALETTES" - SET ALL PALETTE REGISTERS
	AX = 0087h
	ES:BX -> array of 16 WORDs containing values for palette registers
		  (or first 16 DAC registers in 256-color modes)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is ignored in text modes, CGA and Hercules graphics modes
SeeAlso: AX=0041h,AX=004Eh,AX=0086h,AX=00ABh

Top

620088 - INT 62 u - FGDRIVER v4.02 - "FG_PAN" - SET SCREEN ORIGIN

INT 62 u - FGDRIVER v4.02 - "FG_PAN" - SET SCREEN ORIGIN
	AX = 0088h
	BX = new column for screen origin
	CX = new row for screen origin
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00B2h

Top

620089 - INT 62 u - FGDRIVER v4.02 - "FG_PATTERN" - SPECIFY DISPLAY PATTERN FOR COLOR

INT 62 u - FGDRIVER v4.02 - "FG_PATTERN" - SPECIFY DISPLAY PATTERN FOR COLOR
	AX = 0089h
	BX = index of pattern to define
	CX = number of predefined display pattern
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	When displaying a pixel run map, Fastgraph uses the pattern associated
	  with each color index rather than displaying the actual color
	This call has no effect in text and 256-color graphics modes
SeeAlso: AX=0023h,AX=0045h

Top

62008A - INT 62 u - FGDRIVER v4.02 - "FG_PCXHEAD" - GET PCX FILE HEADER

INT 62 u - FGDRIVER v4.02 - "FG_PCXHEAD" - GET PCX FILE HEADER
	AX = 008Ah
	ES:BX -> variable pointer record (see #03493)
Return: AX = status
	    0000h successful
	    FFFEh not a PCX file
	    FFFFh file does not exist
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=008Bh,AX=00B9h

Format of FGDRIVER PCXHEAD variable pointer record:
Offset	Size	Description	(Table 03493)
 00h	WORD	segment of ASCIZ filename
 02h	WORD	offset of ASCIZ filename
 04h	WORD	segment of 128-byte buffer for PCX header
 06h	WORD	offset of 128-byte buffer for PCX header

Top

62008B - INT 62 u - FGDRIVER v4.02 - "FG_PCXMODE" - GET OPTIMAL VIDEO MODE FOR DISPLAY

INT 62 u - FGDRIVER v4.02 - "FG_PCXMODE" - GET OPTIMAL VIDEO MODE FOR DISPLAY
	AX = 008Bh
	ES:BX -> PCX header (see AX=008Ah)
Return: AX = optimal video mode for PCX file
	    FFFEh not a valid PCX header
	    FFFFh unable to determine compatible video mode
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=008Ah,AX=00B9h

Top

62008C - INT 62 u - FGDRIVER v4.02 - "FG_PCXPAL" - GET PALETTE STORED IN PCX FILE

INT 62 u - FGDRIVER v4.02 - "FG_PCXPAL" - GET PALETTE STORED IN PCX FILE
	AX = 008Ch
	ES:BX -> variable pointer record (see #03494)
Return: AX = number of colors in palette (16 or 256) or
	    FFFEh not a valid PCX file
	    FFFFh file not found
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=008Dh

Format of FGDRIVER PCXPAL variable pointer record:
Offset	Size	Description	(Table 03494)
 00h	WORD	segment of ASCIZ .PCX filename
 02h	WORD	offset of ASCIZ .PCX filename
 04h	WORD	segment of buffer for .PCX palette RGB triples
 06h	WORD	offset of buffer for .PCX palette RGB triples
Note:	the buffer for the palette must hold at least three times as many bytes
	  as there are colors in the palette
SeeAlso: #03495

Top

62008D - INT 62 u - FGDRIVER v4.02 - "FG_PCXRANGE" - GET EXTENT OF PCX IMAGE

INT 62 u - FGDRIVER v4.02 - "FG_PCXRANGE" - GET EXTENT OF PCX IMAGE
	AX = 008Dh
	ES:BX -> variable pointer record (see #03495)
Return: indicated variables updated; if the indicated header is not valid,
	  all of the coordinate variables are set to FFFFh
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=008Ch

Format of FGDRIVER PCXRANGE variable pointer record:
Offset	Size	Description	(Table 03495)
 00h	WORD	segment of 128-byte PCX file header
 02h	WORD	offset of 128-byte PCX file header
 04h	WORD	segment of WORD buffer for X coordinate of image's left edge
 04h	WORD	offset of WORD buffer for X coordinate of image's left edge
 08h	WORD	segment of WORD buffer for X coordinate of image's right edge
 0Ah	WORD	offset of WORD buffer for X coordinate of image's right edge
 0Ch	WORD	segment of WORD buffer for Y coordinate of image's top edge
 0Eh	WORD	offset of WORD buffer for Y coordinate of image's top edge
 10h	WORD	segment of WORD buffer for X coordinate of image's bottom edge
 12h	WORD	offset of WORD buffer for X coordinate of image's bottom edge
SeeAlso: #03494

Top

62008E - INT 62 u - FGDRIVER v4.02 - "FG_PLAYING" - DETERMINE WHETHER ASYNC SOUND ACTIVE

INT 62 u - FGDRIVER v4.02 - "FG_PLAYING" - DETERMINE WHETHER ASYNC SOUND ACTIVE
	AX = 008Eh
Return: AX = sound state (0 = no asynchronous sound, 1 = async sound playing)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0059h,AX=0081h,AX=00BDh,AX=00DCh

Top

62008F - INT 62 u - FGDRIVER v4.02 - "FG_POINT" - DISPLAY A PIXEL

INT 62 u - FGDRIVER v4.02 - "FG_POINT" - DISPLAY A PIXEL
	AX = 008Fh
	BX = column
	CX = row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0006h,AX=001Dh,AX=004Dh,AX=0090h

Top

620090 - INT 62 u - FGDRIVER v4.02 - "FG_POINTX" - DISPLAY A PIXEL IN XOR MODE

INT 62 u - FGDRIVER v4.02 - "FG_POINTX" - DISPLAY A PIXEL IN XOR MODE
	AX = 0090h
	BX = column
	CX = row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=004Dh,AX=008Fh

Top

620091 - INT 62 u - FGDRIVER v4.02 - "FG_POLYEDGE" - SPECIFY INCLUSION OF FINAL PIXELS

INT 62 u - FGDRIVER v4.02 - "FG_POLYEDGE" - SPECIFY INCLUSION OF FINAL PIXELS
	AX = 0091h
	BX = edge flag
	    0000h include right- and bottom-edge pixels when drawing polygons
		  with FG_POLYFILL
	    0001h (default) exclue right- and bottom-edge pixels
SeeAlso: AX=0092h

Top

620092 - INT 62 u - FGDRIVER v4.02 - "FG_POLYFILL" - DRAW A FILLED CONVEX POLYGON

INT 62 u - FGDRIVER v4.02 - "FG_POLYFILL" - DRAW A FILLED CONVEX POLYGON
	AX = 0092h
	CX = number of vertices
	ES:BX -> variable pointer record (see #03496)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The vertex array consists of pairs of words specifying the X and Y
	  coordinates of each vertex; the work array is used internally and
	  must contain at least four times as many bytes as the polygon is
	  high in pixels
	This function is ignored in text modes
	If the polygon is non-convex, only a portion of it may be filled
SeeAlso: AX=000Eh,AX=0027h,AX=0091h,AX=0093h,AX=0094h,AX=0095h

Format of FGDRIVER POLYFILL variable pointer record:
Offset	Size	Description	(Table 03496)
 00h	WORD	segment of vertex array (see #03498)
 02h	WORD	offset of vertex array
 04h	WORD	segment of work array
 06h	WORD	offset of work array
SeeAlso: #03497

Top

620093 - INT 62 u - FGDRIVER v4.02 - "FG_POLYGON" - DRAW AN UNFILLED POLYGON

INT 62 u - FGDRIVER v4.02 - "FG_POLYGON" - DRAW AN UNFILLED POLYGON
	AX = 0093h
	CX = number of vertices in polygon
	ES:BX -> variable pointer record (see #03497)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
SeeAlso: AX=0091h,AX=0092h,AX=0094h,AX=0095h

Format of FGDRIVER POLYGON variable pointer record:
Offset	Size	Description	(Table 03497)
 00h	WORD	segment of WORD array containing vertex columns
 02h	WORD	offset of WORD array containing vertex columns
 04h	WORD	segment of WORD array containing vertex rows
 06h	WORD	offset of WORD array containing vertex rows
SeeAlso: #03496

Top

620094 - INT 62 u - FGDRIVER v4.02 - "FG_POLYLINE" - DRAW AN UNFILLED POLYGON

INT 62 u - FGDRIVER v4.02 - "FG_POLYLINE" - DRAW AN UNFILLED POLYGON
	AX = 0094h
	CX = number of vertices in polygon
	ES:BX -> vertex array (see #03498)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is equivalent to "FG_POLYGON", but uses only a single
	  array to define the vertices
	This call is ignored in text modes
SeeAlso: AX=008Fh,AX=0092h,AX=0093h,AX=0095h

Format of FGDRIVER POLYFILL/POLYLINE vertex array element:
Offset	Size	Description	(Table 03498)
 00h	WORD	column
 02h	WORD	row
SeeAlso: #03497

Top

620095 - INT 62 u - FGDRIVER v4.02 - "FG_POLYOFF" - DEFINE POLYGON DRAWING OFFSET

INT 62 u - FGDRIVER v4.02 - "FG_POLYOFF" - DEFINE POLYGON DRAWING OFFSET
	AX = 0095h
	BX = horizontal offset (default 0)
	CX = vertical offset (default 0)
Desc:	define the offsets applied to all vertices of polygons drawn with
	  "FG_POLYFILL" or "FG_POLYLINE"
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0092h,AX=0094h

Top

620096 - INT 62 u - FGDRIVER v4.02 - "FG_PRINT" - DISPLAY STRING OF HARDWARE CHARACTERS

INT 62 u - FGDRIVER v4.02 - "FG_PRINT" - DISPLAY STRING OF HARDWARE CHARACTERS
	AX = 0096h
	CX = length of string
	ES:BX -> string to display
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The string is displayed in the current color, and the graphics cursor
	  is updated to be just to the right of the last displayed character
	This function is ignored in text modes
SeeAlso: AX=000Ch,AX=0037h,AX=0065h,AX=0097h

Top

620097 - INT 62 u - FGDRIVER v4.02 - "FG_PRINTC" - DISPLAY STRING OF HW CHARS (CLIPPED)

INT 62 u - FGDRIVER v4.02 - "FG_PRINTC" - DISPLAY STRING OF HW CHARS (CLIPPED)
	AX = 0097h
	CX = length of string
	ES:BX -> string to display
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The string is displayed in the current color, and the graphics cursor
	  is updated to be just to the right of the last displayed character;
	  only the portion of the string that lies within the current clipping
	  area is displayed
	This function is ignored in text modes
SeeAlso: AX=0096h

Top

620098 - INT 62 u - FGDRIVER v4.02 - "FG_PUTBLOCK" - RESTORE RECTANGLE OF DISPLAY

INT 62 u - FGDRIVER v4.02 - "FG_PUTBLOCK" - RESTORE RECTANGLE OF DISPLAY
	AX = 0098h
	ES:BX -> buffer containing previously-saved image
	CX = left edge
	DX = right edge
	SI = top edge
	DI = bottom edge
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	In text modes, coordinates are character positions; in graphics modes,
	  they are defined in screen space, and the left and right edges are
	  adjusted to a byte boundary if necessary
SeeAlso: AX=003Ch,AX=0099h

Top

620099 - INT 62 u - FGDRIVER v4.02 - "FG_PUTIMAGE" - DISPLAY MODE-SPECIFIC BITMAP IMAGE

INT 62 u - FGDRIVER v4.02 - "FG_PUTIMAGE" - DISPLAY MODE-SPECIFIC BITMAP IMAGE
	AX = 0099h
	ES:BX -> buffer containing mode-specific bitmap
	CX = width in bytes
	DX = height in pixel rows
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The bitmap is displayed with its lower left corner at the graphics
	  cursor position; color 0 is NOT treated as transparent
SeeAlso: AX=0011h,AX=0024h,AX=0036h,AX=0044h,AX=0098h

Top

62009A - INT 62 u - FGDRIVER v4.02 - "FG_QUIET" - STOP CONTINUOUS SYNCHRONOUS SOUND

INT 62 u - FGDRIVER v4.02 - "FG_QUIET" - STOP CONTINUOUS SYNCHRONOUS SOUND
	AX = 009Ah
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call has no effect if there is no continuous sound playing
SeeAlso: AX=0059h,AX=0080h,AX=00BDh,AX=00DCh

Top

62009B - INT 62 u - FGDRIVER v4.02 - "FG_RECT" - DRAW UNFILLED RECTANGLE IN SCREEN SPACE

INT 62 u - FGDRIVER v4.02 - "FG_RECT" - DRAW UNFILLED RECTANGLE IN SCREEN SPACE
	AX = 009Bh
	BX = left edge column
	CX = right edge column
	DX = top edge row
	SI = bottom edge row
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0006h,AX=0012h,AX=0023h,AX=003Ch

Top

62009C - INT 62 u - FGDRIVER v4.02 - "FG_RESET" - ERASE SCREEN AND RESTORE SCREEN ATTR

INT 62 u - FGDRIVER v4.02 - "FG_RESET" - ERASE SCREEN AND RESTORE SCREEN ATTR
	AX = 009Ch
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in graphics modes
	The screen attributes are only restored if ANSI.SYS is loaded
SeeAlso: AX=0028h,AX=00B0h

Top

62009D - INT 62 u - FGDRIVER v4.02 - "FG_RESIZE" - SET GRAPHICS MODE VIDEO PAGE SIZE

INT 62 u - FGDRIVER v4.02 - "FG_RESIZE" - SET GRAPHICS MODE VIDEO PAGE SIZE
	AX = 009Dh
	BX = new page width in pixels
	CX = new page height in pixels
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The visible page must be set to 0000h before making this call
	The mouse, joysticks, expanded memory, and extended memory must be
	  reinitialized after this call
SeeAlso: AX=0084h,AX=00ACh

Top

62009E - INT 62 u - FGDRIVER v4.02 - "FG_RESTORE" - COPY REGION FROM HIDDEN TO VIS PAGE

INT 62 u - FGDRIVER v4.02 - "FG_RESTORE" - COPY REGION FROM HIDDEN TO VIS PAGE
	AX = 009Eh
	BX = left edge column
	CX = right edge column
	DX = top edge row
	SI = bottom edge row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The left and right edges are adjusted to byte boundaries if necessary
SeeAlso: AX=00A2h,AX=00C6h

Top

62009F - INT 62 u - FGDRIVER v4.02 - "FG_RESUME" - RESTART ASYNCHRONOUS SOUND

INT 62 u - FGDRIVER v4.02 - "FG_RESUME" - RESTART ASYNCHRONOUS SOUND
	AX = 009Fh
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00BDh,AX=00C0h

Top

6200A0 - INT 62 u - FGDRIVER v4.02 - "FG_REVIMAGE" - DISPLAY REVERSED IMAGE (BITMAP)

INT 62 u - FGDRIVER v4.02 - "FG_REVIMAGE" - DISPLAY REVERSED IMAGE (BITMAP)
	AX = 00A0h
	ES:BX -> mode-specific bitmap
	CX = width of bitmap in bytes
	DX = height of bitmap in pixel rows
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
SeeAlso: AX=0011h,AX=0024h,AX=0036h,AX=0044h,AX=00A1h,AX=00A9h,AX=00B9h

Top

6200A1 - INT 62 u - FGDRIVER v4.02 - "FG_REVMASK" - DISPLAY REVERSED IMAGE (MASKING MAP)

INT 62 u - FGDRIVER v4.02 - "FG_REVMASK" - DISPLAY REVERSED IMAGE (MASKING MAP)
	AX = 00A1h
	ES:BX -> array containing image stored as a masking map (see #03475)
	CX = number of pixel runs in masking map
	DX = width of masking map in pixels
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes and in native EGA and VGA graphics
	  modes
	The image is drawn with its lower left corner at the current graphics
	  cursor position
SeeAlso: AX=0010h,AX=001Fh,AX=0034h,AX=00A0h,AX=00A9h,AX=00C5h

Top

6200A2 - INT 62 u - FGDRIVER v4.02 - "FG_SAVE" - COPY REGION FROM VISIBLE TO HIDDEN PAGE

INT 62 u - FGDRIVER v4.02 - "FG_SAVE" - COPY REGION FROM VISIBLE TO HIDDEN PAGE
	AX = 00A2h
	BX = left edge column
	CX = right edge column
	DX = top edge row
	SI = bottom edge row
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The left and right edges are adjusted to byte boundaries if necessary
SeeAlso: AX=009Eh,AX=00C6h

Top

6200A3 - INT 62 u - FGDRIVER v4.02 - "FG_SCALE" - SCALE BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_SCALE" - SCALE BITMAP
	AX = 00A3h
	ES:BX -> variable pointer record (see #03499)
	CX = width of source bitmap in pixels (0 < width <= 1024)
	DX = height of source bitmap in pixels (0 < height <= 1024)
	SI = desired width of scaled bitmap (0 < width <= 1024)
	DI = desired height of scaled bitmap (0 < height <= 1024)
Return: nothing
SeeAlso: AX=00B7h

Format of FGDRIVER SCALE variable pointer record:
Offset	Size	Description	(Table 03499)
 00h	WORD	segment of source bitmap (one pixel per byte)
 02h	WORD	offset of source bitmap
 04h	WORD	segment of buffer for resulting scaled bitmap
 06h	WORD	offset of buffer for resulting scaled bitmap

Top

6200A4 - INT 62 u - FGDRIVER v4.02 - "FG_SCRLOCK" - GET STATE OF SCROLL LOCK KEY

INT 62 u - FGDRIVER v4.02 - "FG_SCRLOCK" - GET STATE OF SCROLL LOCK KEY
	AX = 00A4h
Return: AX = ScrollLock state (0000h off, 0001h on)
Program: FGDRIVER is the external video driver for the shareware
	  Fastgraph/Light by Ted Gruber Software
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ah,AX=0082h,AX=00A8h,AX=00B1h

Top

6200A5 - INT 62 u - FGDRIVER v4.02 - "FG_SCROLL" - VERTICALLY SCROLL SCREEN REGION

INT 62 u - FGDRIVER v4.02 - "FG_SCROLL" - VERTICALLY SCROLL SCREEN REGION
	AX = 00A5h
	BX = left edge column
	CX = right edge column
	DX = top edge row
	SI = bottom edge row
	DI = number of pixels by which to scroll (positive scrolls up,
	      negative scrolls down)
	ES = type of scroll
	    0000h circular (rows scrolled off are copied to vacated rows)
	    else vacated rows are filled with the current color
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	In graphics modes, the left and right edges are adjusted to byte
	  boundaries if necessary
	Circular scrolling uses part of the hidden page as a workspace
SeeAlso: AX=0088h,AX=00B2h

Top

6200A6 - INT 62 u - FGDRIVER v4.02 - "FG_SETATTR" - SET TEXT-MODE CHARACTER ATTRIBUTE

INT 62 u - FGDRIVER v4.02 - "FG_SETATTR" - SET TEXT-MODE CHARACTER ATTRIBUTE
	AX = 00A6h
	BX = foreground
	CX = background
	DX = blink (0000h nonblinking, 0001h blink)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in graphics modes
SeeAlso: AX=000Bh,AX=003Ah,AX=0048h

Top

6200A7 - INT 62 u - FGDRIVER v4.02 - "FG_SETBANKS" - SET SVGA READ AND WRITE BANKS

INT 62 u - FGDRIVER v4.02 - "FG_SETBANKS" - SET SVGA READ AND WRITE BANKS
	AX = 00A7h
	BX = memory bank from which to read (FFFFh leave unchanged)
	CX = memory bank to which to write (FFFFh leave unchanged)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=003Bh

Top

6200A8 - INT 62 u - FGDRIVER v4.02 - "FG_SETCAPS" - SET STATE OF CAPSLOCK KEY

INT 62 u - FGDRIVER v4.02 - "FG_SETCAPS" - SET STATE OF CAPSLOCK KEY
	AX = 00A8h
	BX = new state (0000h off, 0001h on)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ah,AX=0082h,AX=00A4h,AX=00B1h

Top

6200A9 - INT 62 u - FGDRIVER v4.02 - "FG_SETCLIP" - SET CLIPPING REGION

INT 62 u - FGDRIVER v4.02 - "FG_SETCLIP" - SET CLIPPING REGION
	AX = 00A9h
	BX = left edge of clipping region
	CX = right edge of clipping region
	DX = top edge of clipping region
	SI = bottom edge of clipping region
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0010h,AX=001Fh,AX=0034h,AX=003Eh,AX=00A1h,AX=00C5h

Top

6200AA - INT 62 u - FGDRIVER v4.02 - "FG_SETCOLOR" - SET CURRENT COLOR

INT 62 u - FGDRIVER v4.02 - "FG_SETCOLOR" - SET CURRENT COLOR
	AX = 00AAh
	BX = new color index (or text attribute in text modes)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0018h,AX=0040h,AX=0045h

Top

6200AB - INT 62 u - FGDRIVER v4.02 - "FG_SETDACS" - SET VIDEO DAC CONTENTS

INT 62 u - FGDRIVER v4.02 - "FG_SETDACS" - SET VIDEO DAC CONTENTS
	AX = 00ABh
	CX = number of DAC registers to set (0001h to 0100h)
	DX = starting DAC register number (0000h to 00FFh)
	ES:BX -> buffer containing DAC red/green/blue triples
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The register number wraps back to zero after reaching FFh
	This call has no effect in text modes or graphics modes below 11h
SeeAlso: AX=0041h,AX=004Eh,AX=0086h,INT 10/AX=1012h

Top

6200AC - INT 62 u - FGDRIVER v4.02 - "FG_SETENTRY" - SET TYPE AND ADDRESS OF VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_SETENTRY" - SET TYPE AND ADDRESS OF VIDEO PAGE
	AX = 00ACh
	BX = page number (00h-3Fh)
	CX = page address
	DX = page type (see #03484 at AX=0042h)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0038h,AX=0042h,AX=00B0h

Top

6200AD - INT 62 u - FGDRIVER v4.02 - "FG_SETFUNC" - SET LOGICAL OPERATION FOR VIDEO OPS

INT 62 u - FGDRIVER v4.02 - "FG_SETFUNC" - SET LOGICAL OPERATION FOR VIDEO OPS
	AX = 00ADh
	BX = operation
	    0000h replacement
	    0001h AND
	    0002h OR
	    0003h XOR
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is only available in native EGA/VGA graphics modes
	  (0Dh to 12h)
SeeAlso: AX=001Eh,AX=008Fh

Top

6200AE - INT 62 u - FGDRIVER v4.02 - "FG_SETHPAGE" - SET HIDDEN VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_SETHPAGE" - SET HIDDEN VIDEO PAGE
	AX = 00AEh
	BX = new hidden page (0000h to 003Fh)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The specified page must be a physical page or a virtual page
SeeAlso: AX=0043h,AX=00B2h,AX=00B6h

Top

6200AF - INT 62 u - FGDRIVER v4.02 - "FG_SETLINES" - SET TEXT ROWS ON SCREEN

INT 62 u - FGDRIVER v4.02 - "FG_SETLINES" - SET TEXT ROWS ON SCREEN
	AX = 00AFh
	BX = new screen size (25, 43, 50)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0047h

Top

6200B0 - INT 62 u - FGDRIVER v4.02 - "FG_SETMODE" - SELECT VIDEO MODE AND INITIALIZE

INT 62 u - FGDRIVER v4.02 - "FG_SETMODE" - SELECT VIDEO MODE AND INITIALIZE
	AX = 00B0h
	BX = new video mode or FFFFh for current mode (see #03500)
	ES:DX -> WORD shareware splash screen flag
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call resets the active video page to page 0000h, the clipping
	  region to the entire screen, text rows to 25, etc.
	in the shareware version, FGDRIVER sets the word pointed at by ES:DX
	  to 9090h after it shows the shareware announcement to the user
SeeAlso: AX=004Bh,INT 10/AH=00h

(Table 03500)
Values for FGDRIVER video mode:
 00h-07h standard BIOS modes
 09h	PCjr/Tandy1000 320x200x16
 0Bh	Hercules graphics 720x348
 0Ch	Hercules graphics 320x200
 0Dh-13h standard BIOS modes
 14h	VGA graphics 320x200x256
 15h	VGA graphics 320x400x256
 16h	VGA graphics 320x240x256
 17h	VGA graphics 320x480x256
 18h	SVGA graphics 640x400x256
 19h	SVGA graphics 640x480x256
 1Ah	SVGA graphics 800x600x256
 1Bh	SVGA graphics 1024x768x256
 1Ch	SVGA graphics 800x600x16
 1Dh	SVGA graphics 1024x768x16

Top

6200B1 - INT 62 u - FGDRIVER v4.02 - "FG_SETNUM" - SET STATE OF NUMLOCK KEY

INT 62 u - FGDRIVER v4.02 - "FG_SETNUM" - SET STATE OF NUMLOCK KEY
	AX = 00B1h
	BX = new state (0000h off, 0001h on)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ah,AX=0082h,AX=00A4h,AX=00A8h

Top

6200B2 - INT 62 u - FGDRIVER v4.02 - "FG_SETPAGE" - SET ACTIVE VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_SETPAGE" - SET ACTIVE VIDEO PAGE
	AX = 00B2h
	BX = new video page (0000h to 003Fh)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The specified page must be a physical or virtual page
SeeAlso: AX=0039h,AX=0042h,AX=0043h,AX=0050h,AX=0088h

Top

6200B3 - INT 62 u - FGDRIVER v4.02 - "FG_SETRGB" - SET VIDEO DAC REGISTER CONTENTS

INT 62 u - FGDRIVER v4.02 - "FG_SETRGB" - SET VIDEO DAC REGISTER CONTENTS
	AX = 00B3h
	BX = palette or DAC register number
	CX = red color component
	DX = green component
	SI = blue component
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The register number may be negative for Tandy, PCjr, and 200-line
	  EGA graphics modes to specify an intense color
	This call has no effect in text, CGA graphics, and Hercules graphics
	  modes
SeeAlso: AX=004Eh

Top

6200B4 - INT 62 u - FGDRIVER v4.02 - UNUSED

INT 62 u - FGDRIVER v4.02 - UNUSED
	AX = 00B4h
Return: AX = 0000h
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)

Top

6200B5 - INT 62 u - FGDRIVER v4.02 - "FG_SETVIEW" - DEFINE VIEWPORT

INT 62 u - FGDRIVER v4.02 - "FG_SETVIEW" - DEFINE VIEWPORT
	AX = 00B5h
	ES:BX -> variable record (see #03501)
	CX = viewport's top edge in screen space
	DX = viewport's bottom edge in screen space
Return: nothing
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=004Fh

Format of FGDRIVER SETVIEW variable record:
Offset	Size	Description	(Table 03501)
 00h	WORD	viewport's left edge in viewport units
 02h	WORD	viewport's right edge in viewport units
 04h	WORD	viewport's top edge in viewport units
 06h	WORD	viewport's bottom edge in viewport units
 08h	WORD	viewport's left edge in screen space
 0Ah	WORD	viewport's right edge in screen space

Top

6200B6 - INT 62 u - FGDRIVER v4.02 - "FG_SETVPAGE" - SET VISIBLE VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_SETVPAGE" - SET VISIBLE VIDEO PAGE
	AX = 00B6h
	BX = new video page (0000h to 003Fh)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The specified page must be a physical or virtual page
SeeAlso: AX=0043h,AX=00AEh,AX=00B2h

Top

6200B7 - INT 62 u - FGDRIVER v4.02 - "FG_SHEAR" - SHEAR UNPACKED BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_SHEAR" - SHEAR UNPACKED BITMAP
	AX = 00B7h
	ES:BX -> variable pointer record (see #03502)
	CX = bitmap width (0 < width <= 1024)
	DX = bitmap height (0 < height <= 1024)
	SI = size of resulting image (width for horiz. shear, height for vert.)
	DI = shear type
	    0000h horizontal shear to left
	    0001h horizontal shear to right
	    0002h vertical shear to left (left edge stretched up)
	    0003h vertical shear to right (right edge stretched up)
Return: nothing
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00A3h

Format of FGDRIVER SHEAR variable pointer record:
Offset	Size	Description	(Table 03502)
 00h	WORD	segment of source bitmap
 02h	WORD	offset of source bitmap
 04h	WORD	segment of buffer for resulting bitmap
 06h	WORD	offset of buffer for resulting bitmap

Top

6200B8 - INT 62 u - FGDRIVER v4.02 - "FG_SHOWFLIC" - DISPLAY IMAGE FROM FLI/FLC FILE

INT 62 u - FGDRIVER v4.02 - "FG_SHOWFLIC" - DISPLAY IMAGE FROM FLI/FLC FILE
	AX = 00B8h
	ES:BX -> ASCIZ filename for FLI/FLC file
	CX = number of times to display image file (0000h = continuously)
	DX = control flags (see #03479 at AX=0031h)
Return: AX = status
	    0000h successful
	    0001h file not found
	    0002h not a valid FLI/FLC file
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	the FLI/FLC display may be stopped by the user by pressing Esc
SeeAlso: AX=0030h,AX=0031h,AX=00B9h

Top

6200B9 - INT 62 u - FGDRIVER v4.02 - "FG_SHOWPCX" - DISPLAY IMAGE FROM PCX FILE

INT 62 u - FGDRIVER v4.02 - "FG_SHOWPCX" - DISPLAY IMAGE FROM PCX FILE
	AX = 00B9h
	ES:BX -> ASCIZ filename of PCX image
	CX = flags (see #03503)
Return: AX = status
	    0000h success
	    0001h file not found
	    0002h not a PCX file
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is ignored in text modes and Hercules low-res graphics
SeeAlso: AX=005Bh,AX=0060h"1.10",AX=006Ch,AX=006Dh,AX=006Eh,AX=00B8h,AX=00BAh
SeeAlso: AX=00BBh

Bitfields for FGDRIVER flags:
Bit(s)	Description	(Table 03503)
 0	use current palette rather than PCX file's palette
 1	display image at cursor position instead of position in PCX header
 2-15	reserved

Top

6200BA - INT 62 u - FGDRIVER v4.02 - "FG_SHOWPPR" - DISPLAY IMAGE FROM PPR FILE

INT 62 u - FGDRIVER v4.02 - "FG_SHOWPPR" - DISPLAY IMAGE FROM PPR FILE
	AX = 00BAh
	ES:BX -> ASCIZ filename of packed pixel run image
	CX = width in pixels (nonzero)
Return: AX = status
	    0000h successful
	    0001h file not found
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The image is displayed with its lower left corner at the current
	  graphics cursor position
	This function is ignored in text modes and 256-color graphics modes
SeeAlso: AX=005Bh,AX=006Ch,AX=006Dh,AX=006Eh,AX=00B9h,AX=00BBh

Top

6200BB - INT 62 u - FGDRIVER v4.02 - "FG_SHOWSPR" - DISPLAY IMAGE FROM SPR FILE

INT 62 u - FGDRIVER v4.02 - "FG_SHOWSPR" - DISPLAY IMAGE FROM SPR FILE
	AX = 00BBh
	ES:BX -> ASCIZ filename of standard pixel run image
	CX = width in pixels (nonzero)
Return: AX = status
	    0000h successful
	    0001h file not found
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The image is displayed with its lower left corner at the current
	  graphics cursor position
	This function is ignored in text modes
SeeAlso: AX=005Bh,AX=006Ch,AX=006Dh,AX=006Eh,AX=00B9h,AX=00BAh

Top

6200BC - INT 62 u - FGDRIVER v4.02 - "FG_SOUND" - MAKE SOUND FOR SPECIFIED DURATION

INT 62 u - FGDRIVER v4.02 - "FG_SOUND" - MAKE SOUND FOR SPECIFIED DURATION
	AX = 00BCh
	BX = frequency in Hertz (18-32767)
	CX = duration in clock ticks (0000h or negative for continuous sound)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored if asynchronous sound (AX=00A5h,AX=00A8h,
	  AX=00AAh) is already in progress
SeeAlso: AX=0059h,AX=0080h,AX=00BDh,AX=00C0h,AX=00DBh

Top

6200BD - INT 62 u - FGDRIVER v4.02 - "FG_SOUNDS" - PLAY SOUNDS IN BACKGROUND

INT 62 u - FGDRIVER v4.02 - "FG_SOUNDS" - PLAY SOUNDS IN BACKGROUND
	AX = 00BDh
	CX = number of times to cycle through sound list
	ES:BX -> sounds array (see #03504)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored if asynchronous sound (AX=00A5h,AX=00A8h,
	  AX=00AAh) is already in progress
SeeAlso: AX=0059h,AX=0081h,AX=00BCh,AX=00C0h,AX=00DCh

Format of FGDRIVER sounds array element:
Offset	Size	Description	(Table 03504)
 00h	WORD	frequency of sound in Hertz (0000h ends array)
 02h	WORD	duration of sound in clock ticks

Top

6200BE - INT 62 u - FGDRIVER v4.02 - "FG_SPLIT" - ENABLE/DISABLE SPLIT SCREEN ENVIRONMNT

INT 62 u - FGDRIVER v4.02 - "FG_SPLIT" - ENABLE/DISABLE SPLIT SCREEN ENVIRONMNT
	AX = 00BEh
	BX = beginning row for bottom half of split-screen
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)

Top

6200BF - INT 62 u - FGDRIVER v4.02 - "FG_STALL" - PAUSE FOR SPECIFIED DURATION

INT 62 u - FGDRIVER v4.02 - "FG_STALL" - PAUSE FOR SPECIFIED DURATION
	AX = 00BFh
	BX = duration in processor-dependent delay units (see AX=0070h)
Return: after delay elapses
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0070h,INT 2F/AX=1224h

Top

6200C0 - INT 62 u - FGDRIVER v4.02 - "FG_SUSPEND" - TEMPORARILY STOP ASYNCHRONOUS SOUND

INT 62 u - FGDRIVER v4.02 - "FG_SUSPEND" - TEMPORARILY STOP ASYNCHRONOUS SOUND
	AX = 00C0h
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call has no effect if there is no asynchronous sound in progress
	The program must not exit while sound is suspended
SeeAlso: AX=0059h,AX=0080h,AX=00BDh,AX=00C0h,AX=00DBh

Top

6200C1 - INT 62 u - FGDRIVER v4.02 - "FG_SVGAINIT" - INITIALIZE FASTGRAPH SVGA KERNEL

INT 62 u - FGDRIVER v4.02 - "FG_SVGAINIT" - INITIALIZE FASTGRAPH SVGA KERNEL
	AX = 00C1h
	BX = method (see #03505)
Return: AX = status
	    0000h no VESA BIOS or supported SVGA chipset
	    0001h using VESA BIOS
	    0002h-0016h specific chipset being used (same as "method" below)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function must be called before attempting to set SVGA graphics
	  modes (18h to 1Dh) or using "FG_BESTMODE", "FG_TESTMODE", or
	  "FG_MEMORY"
SeeAlso: AX=0025h,AX=00C2h,AX=00C3h

(Table 03505)
Values for FGDRIVER SVGA method:
 0000h	autodetect, give chipset-specific code priority over VESA
 0001h	autodetect, give VESA priority over chipset-specific code
 0002h	Ahead type "A"
 0003h	Ahead type "B"
 0004h	ATI 18800
 0005h	ATI 18800-1
 0006h	ATI 28800
 0007h	Chips & Technologies 82c451/455/456
 0008h	C&T 82c452
 0009h	C&T 82c453
 000Ah	Genoa 6000 series
 000Bh	Oak OTI-067
 000Ch	Paradise PVGA1a
 000Dh	Paradise WD90C00/WD90C10
 000Eh	Paradise WD90C11/WD90C30/WD90C31
 000Fh	Trident 8800
 0010h	Trident 8900
 0011h	Tseng ET3000
 0012h	Tseng ET4000
 0013h	Video7
 0014h	Cirrus Logic 5400 series
 0015h	S3
 0016h	Trident 8900B/8900C/9000

Top

6200C2 - INT 62 u - FGDRIVER v4.02 - "FG_SVGASTAT" - GET SVGA CHIPSET INFORMATION

INT 62 u - FGDRIVER v4.02 - "FG_SVGASTAT" - GET SVGA CHIPSET INFORMATION
	AX = 00C2h
Return: AX = chipset information (see #03506)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0025h,AX=00C1h,AX=00C3h

Bitfields for FGDRIVER chipset information:
Bit(s)	Description	(Table 03506)
 0	SVGA kernel initialized
 1	VESA support enabled
 2	extended video pages available in modes 13-23
 3	SVGA chipset has separate read and write banks
 4-15	reserved (0)

Top

6200C3 - INT 62 u - FGDRIVER v4.02 - "FG_SVGAVER" - GET FASTGRAPH SVGA KERNEL VERSION

INT 62 u - FGDRIVER v4.02 - "FG_SVGAVER" - GET FASTGRAPH SVGA KERNEL VERSION
	AX = 00C3h
	ES:BX -> variable pointer record (see #03507)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00C1h,AX=00C2h

Format of FGDRIVER variable pointer record:
Offset	Size	Description	(Table 03507)
 00h	WORD	segment of WORD buffer for major version
 02h	WORD	offset of WORD buffer for major version
 04h	WORD	segment of WORD buffer for minor version (hundredths)
 06h	WORD	offset of WORD buffer for minor version

Top

6200C4 - INT 62 u - FGDRIVER v4.02 - "FG_TCDEFINE" - DEFINE TRANSPARENCY OF COLOR INDEX

INT 62 u - FGDRIVER v4.02 - "FG_TCDEFINE" - DEFINE TRANSPARENCY OF COLOR INDEX
	AX = 00C4h
	BX = color index
	CX = transparency (00h opaque, other transparent)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is ignored in text modes
SeeAlso: AX=00C5h,AX=00C6h

Top

6200C5 - INT 62 u - FGDRIVER v4.02 - "FG_TCMASK" - SET TRANSPARENT COLORS

INT 62 u - FGDRIVER v4.02 - "FG_TCMASK" - SET TRANSPARENT COLORS
	AX = 00C5h
	BX = colors to consider transparent (bit 0 = color 0, etc)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This call is ignored in text modes
	The specified colors are considered transparent by "FG_TCXFER"
SeeAlso: AX=00C4h,AX=00C6h

Top

6200C6 - INT 62 u - FGDRIVER v4.02 - "FG_TCXFER" - COPY REGION EXCLUDING TRANSPARENT

INT 62 u - FGDRIVER v4.02 - "FG_TCXFER" - COPY REGION EXCLUDING TRANSPARENT
	AX = 00C6h
	CX = source video page
	DX = destination video page
	ES:BX -> copy record (see #03508)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	Pixels which are in any of the colors defined as transparent with
	  "FG_TCMASK" (see AX=00C5h) are left unchanged in the destination
	  region
	The source and destination regions must not overlap if they are located
	  on the same page
	This call is ignored in text modes
SeeAlso: AX=00C4h,AX=00C5h,AX=00CAh

Top

6200C7 - INT 62 u - FGDRIVER v4.02 - "FG_TESTMODE" - CHECK IF VIDEO MODE AVAILABLE

INT 62 u - FGDRIVER v4.02 - "FG_TESTMODE" - CHECK IF VIDEO MODE AVAILABLE
	AX = 00C7h
	BX = desired video mode (00h-17h, also 18h-1Dh after "FG_SVGAINIT")
	CX = required number of video pages (ignore memory size if <= 0)
Return: AX = status
	    0000h mode not available with requested number of pages
	    0001h mode is available
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0005h,AX=00B0h

Top

6200C8 - INT 62 u - FGDRIVER v4.02 - "FG_TEXT" - DISPLAY STRING OF CHARACTERS

INT 62 u - FGDRIVER v4.02 - "FG_TEXT" - DISPLAY STRING OF CHARACTERS
	AX = 00C8h
	CX = length of string
	ES:BX -> string
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The string is displayed starting at the text cursor position using the
	  current text attribute (text modes) or color index (graphics modes)
	The text cursor position is updated after this call
SeeAlso: AX=000Ch,AX=0096h,AX=00C9h

Top

6200C9 - INT 62 u - FGDRIVER v4.02 - "FG_TEXTC" - DISPLAY STRING OF CHARACTERS (CLIPPED)

INT 62 u - FGDRIVER v4.02 - "FG_TEXTC" - DISPLAY STRING OF CHARACTERS (CLIPPED)
	AX = 00C9h
	CX = length of string
	ES:BX -> string
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	The string is displayed starting at the text cursor position using the
	  current text attribute (text modes) or color index (graphics modes),
	  showing only the portion within the current clipping window
	The text cursor position is updated after this call
SeeAlso: AX=00C8h

Top

6200CA - INT 62 u - FGDRIVER v4.02 - "FG_TRANSFER" - COPY REGION

INT 62 u - FGDRIVER v4.02 - "FG_TRANSFER" - COPY REGION
	AX = 00CAh
	CX = source video page
	DX = destination video page
	ES:BX -> copy record (see #03508)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	The source and destination regions must not overlap if they are located
	  on the same page
SeeAlso: AX=009Eh,AX=00A2h,AX=00A5h,AX=00C6h

Format of FGDRIVER copy record:
Offset	Size	Description	(Table 03508)
 00h	WORD	left edge column of source region
 02h	WORD	right edge column of source region
 04h	WORD	top edge row of source region
 06h	WORD	bottom edge row of source region
 08h	WORD	left edge of destination
 0Ah	WORD	bottom edge of destination

Top

6200CB - INT 62 u - FGDRIVER v4.02 - "FG_UNPACK" - EXPAND MODE-SPECIFIC BITMAP

INT 62 u - FGDRIVER v4.02 - "FG_UNPACK" - EXPAND MODE-SPECIFIC BITMAP
	AX = 00CBh
	ES:BX -> variable pointer record (see #03509)
	CX = size of source bitmap in bytes
Return: result buffer filled
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=0083h

Format of FGDRIVER UNPACK variable pointer record:
Offset	Size	Description	(Table 03509)
 00h	WORD	segment of source bitmap
 02h	WORD	offset of source bitmap
 04h	WORD	segment of buffer for resulting bitmap
 06h	WORD	offset of buffer for resulting bitmap

Top

6200CC - INT 62 u - FGDRIVER v4.02 - "FG_VBADDR" - GET ADDRESS OF VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBADDR" - GET ADDRESS OF VIRTUAL BUFFER
	AX = 00CCh
	BX = virtual buffer handle (0000h-001Fh)
Return: DX:AX -> virtual buffer
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CDh,AX=00CEh,AX=00CFh,AX=00D3h

Top

6200CD - INT 62 u - FGDRIVER v4.02 - "FG_VBALLOC" - CREATE VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBALLOC" - CREATE VIRTUAL BUFFER
	AX = 00CDh
	BX = width of virtual buffer in pixels
	CX = height in pixels
Return: AX = handle for virtual buffer, or
	    FFFEh out of memory
	    FFFFh virtual buffer table full
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CCh,AX=00CEh,AX=00D0h,AX=00D1h,AX=00D2h,AX=00D4h

Top

6200CE - INT 62 u - FGDRIVER v4.02 - "FG_VBCLOSE" - CLOSE ACTIVE VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBCLOSE" - CLOSE ACTIVE VIRTUAL BUFFER
	AX = 00CEh
Desc:	close the active virtual buffer and direct further graphics to the
	  active video page
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CCh,AX=00D1h,AX=00D4h,AX=00D5h,AX=00D9h

Top

6200CF - INT 62 u - FGDRIVER v4.02 - "FG_VBCOPY" - COPY RECT BETWEEN VIRTUAL BUFFERS

INT 62 u - FGDRIVER v4.02 - "FG_VBCOPY" - COPY RECT BETWEEN VIRTUAL BUFFERS
	AX = 00CFh
	ES:BX -> variable record (see #03510)
	CX = handle for source virtual buffer
	DX = handle for destination virtual buffer
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	if the destination buffer is the same as the source buffer, the regions
	  must not overlap
SeeAlso: AX=00D0h,AX=00D1h,AX=00D4h,AX=00D6h,AX=00D7h

Format of FGDRIVER VBCOPY variable record:
Offset	Size	Description	(Table 03510)
 00h	WORD	source region's left edge
 02h	WORD	source region's right edge
 04h	WORD	source region's top edge
 06h	WORD	source region's bottom edge
 08h	WORD	X coordinate of destination's upper left corner
 0Ah	WORD	Y coordinate of destination's upper left corner

Top

6200D0 - INT 62 u - FGDRIVER v4.02 - "FG_VBCUT" - COPY RECT FROM VIDEO TO VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBCUT" - COPY RECT FROM VIDEO TO VIRTUAL BUFFER
	AX = 00D0h
	BX = source region's left edge
	CX = source region's right edge
	DX = source region's top edge
	SI = source region's bottom edge
	DI = X coordinate of destination's upper left corner
	ES = Y coordinate of destination's upper left corner
Desc:	copy a rectangle from the active video page to the active virtual
	  buffer
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CDh,AX=00CFh,AX=00D4h,AX=00D6h

Top

6200D1 - INT 62 u - FGDRIVER v4.02 - "FG_VBDEFINE" - CREATE VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBDEFINE" - CREATE VIRTUAL BUFFER
	AX = 00D1h
	ES:BX -> memory block for virtual buffer
	CX = buffer width in pixels
	DX = buffer height in pixels
Return: AX = virtual buffer handle
	    FFFFh on error
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	the application-provided buffer must be large enough to hold CX*DX
	  bytes
SeeAlso: AX=00CCh,AX=00CDh,AX=00CEh,AX=00D2h,AX=00D4h,AX=00D5h

Top

6200D2 - INT 62 u - FGDRIVER v4.02 - "FG_VBFREE" - RELEASE VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBFREE" - RELEASE VIRTUAL BUFFER
	AX = 00D2h
	BX = virtual buffer handle
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	this function should be used only for buffers created with FG_VBALLOC
SeeAlso: AX=00CDh,AX=00D4h,AX=00D5h

Top

6200D3 - INT 62 u - FGDRIVER v4.02 - "FG_VBHANDLE" - GET ACTIVE VIRTUAL BUFFER'S HANDLE

INT 62 u - FGDRIVER v4.02 - "FG_VBHANDLE" - GET ACTIVE VIRTUAL BUFFER'S HANDLE
	AX = 00D3h
Return: AX = handle for active virtual buffer
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CCh,AX=00D4h

Top

6200D4 - INT 62 u - FGDRIVER v4.02 - "FG_VBINIT" - INITIALIZE VIRTUAL BUFFER ENVIRONMENT

INT 62 u - FGDRIVER v4.02 - "FG_VBINIT" - INITIALIZE VIRTUAL BUFFER ENVIRONMENT
	AX = 00D4h
Return: nothing
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	this function must be called before any other virtual buffer functions
	  are used
SeeAlso: AX=00CDh,AX=00D5h

Top

6200D5 - INT 62 u - FGDRIVER v4.02 - "FG_VBOPEN" - MAKE VIRTUAL BUFFER ACTIVE

INT 62 u - FGDRIVER v4.02 - "FG_VBOPEN" - MAKE VIRTUAL BUFFER ACTIVE
	AX = 00D5h
	BX = virtual buffer handle
Return: AX = status
	    0000h successful
	    FFFEh no buffer defined for specified handle
	    FFFFh invalid buffer handle
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CDh,AX=00CEh,AX=00D1h,AX=00D4h,AX=00D9h

Top

6200D6 - INT 62 u - FGDRIVER v4.02 - "FG_VBPASTE" - COPY RECT FROM VIRTUAL BUF TO VIDEO

INT 62 u - FGDRIVER v4.02 - "FG_VBPASTE" - COPY RECT FROM VIRTUAL BUF TO VIDEO
	AX = 00D6h
	BX = source region's left edge
	CX = source region's right edge
	DX = source region's top edge
	SI = source region's bottom edge
	DI = X coordinate of destination's upper left corner
	ES = Y coordinate of destination's upper left corner
Desc:	copy a rectangle from the active virtual buffer to the active video
	  page
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00CFh,AX=00D0h,AX=00D4h,AX=00D7h

Top

6200D7 - INT 62 u - FGDRIVER v4.02 - "FG_VBTCCOPY" - COPY RECTANGLE BETWEEN VIRTUAL BUFS

INT 62 u - FGDRIVER v4.02 - "FG_VBTCCOPY" - COPY RECTANGLE BETWEEN VIRTUAL BUFS
	AX = 00D7h
	ES:BX -> variable record (see #03511)
	CX = source virtual buffer's handle
	DX = destination virtual buffer's handle
Desc:	copy rectangle from one virtual buffer to another with transparent
	  colors
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	if the destination buffer is the same as the source buffer, the regions
	  must not overlap
SeeAlso: AX=00CFh,AX=00D0h,AX=00D6h,AX=00D8h

Format of FGDRIVER VBTCCOPY variable record:
Offset	Size	Description	(Table 03511)
 00h	WORD	source region's left edge
 02h	WORD	source region's right edge
 04h	WORD	source region's top edge
 06h	WORD	source region's bottom edge
 08h	WORD	X coordinate of destination region's upper left corner
 0Ah	WORD	Y coordinate of destination region's upper left corner

Top

6200D8 - INT 62 u - FGDRIVER v4.02 - "FG_VBTCXFER" - COPY RECTANGLE TO ACTIVE VIDEO PAGE

INT 62 u - FGDRIVER v4.02 - "FG_VBTCXFER" - COPY RECTANGLE TO ACTIVE VIDEO PAGE
	AX = 00D8h
	BX = source region's left edge
	CX = source region's right edge
	DX = source region's top edge
	SI = source region's bottom edge
	DI = X coordinate of destination's upper left corner
	ES = Y coordinate of destination's upper left corner
Desc:	copy a rectangle from the active virtual buffer to the active video
	  page, with transparent colors
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
SeeAlso: AX=00D6h,AX=00D7h

Top

6200D9 - INT 62 u - FGDRIVER v4.02 - "FG_VBUNDEF" - RELEASE HANDLE FOR VIRTUAL BUFFER

INT 62 u - FGDRIVER v4.02 - "FG_VBUNDEF" - RELEASE HANDLE FOR VIRTUAL BUFFER
	AX = 00D9h
	BX = virtual buffer handle
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	the specified handle must not reference the currently-active virtual
	  buffer
SeeAlso: AX=00D1h,AX=00D5h

Top

6200DA - INT 62 u - FGDRIVER v4.02 - "FG_VGASTATE" - SAVE/RESTORE VGA CONTROLLER STATE

INT 62 u - FGDRIVER v4.02 - "FG_VGASTATE" - SAVE/RESTORE VGA CONTROLLER STATE
	AX = 00DAh
	BX = direction (0000h save, else restore)
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474)
	this function is only meaningful in modes 0Dh and above

Top

6200DB - INT 62 u - FGDRIVER v4.02 - "FG_VOICE" - START SOUND

INT 62 u - FGDRIVER v4.02 - "FG_VOICE" - START SOUND
	AX = 00DBh
	BX = channel on TI sound chip
	    1-3 = channels 1-3, 4 = channel 4 with periodic noise,
	    5 = channel 4 with white noise
	CX = frequency in Hz (18-32767 for channels 1-3; 0=512 Hz, 1=1024 Hz,
	      2=2048 Hz for channels 4 and 5)
	DX = volume
	SI = duration in clock ticks (continuous if <= 0)
Program: FGDRIVER is the external video driver for the shareware
	  Fastgraph/Light by Ted Gruber Software
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is only available on the PCjr and Tandy 1000 machines
SeeAlso: AX=0080h,AX=00BCh,AX=00DCh

Top

6200DC - INT 62 u - FGDRIVER v4.02 - "FG_VOICES" - PLAY SOUNDS IN BACKGROUND

INT 62 u - FGDRIVER v4.02 - "FG_VOICES" - PLAY SOUNDS IN BACKGROUND
	AX = 00DCh
	ES:BX -> tone array (see #03512)
	CX = number of times to repeat tone array
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	This function is only available on the PCjr and Tandy 1000 machines
SeeAlso: AX=0059h,AX=0081h,AX=00BDh,AX=00DBh

Format of FGDRIVER tone array element:
Offset	Size	Description	(Table 03512)
 00h	WORD	channel number (0000h terminates array)
 02h	WORD	frequency
 04h	WORD	volume
 06h	WORD	duration in 1/72.8 seconds

Top

6200DD - INT 62 u - FGDRIVER v4.02 - "FG_WAITFOR" - DELAY FOR SPECIFIED DURATION

INT 62 u - FGDRIVER v4.02 - "FG_WAITFOR" - DELAY FOR SPECIFIED DURATION
	AX = 00DDh
	BX = duration in clock ticks
Return: after delay elapses
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00BFh,INT 1A/AX=FF01h

Top

6200DE - INT 62 u - FGDRIVER v4.02 - "FG_WAITKEY" - FLUSH KEYBOARD BUFFER AND AWAIT KEY

INT 62 u - FGDRIVER v4.02 - "FG_WAITKEY" - FLUSH KEYBOARD BUFFER AND AWAIT KEY
	AX = 00DEh
Return: after next key pressed
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=000Ah,AX=0046h,AX=0063h,AX=0069h,INT 16/AH=00h

Top

6200DF - INT 62 u - FGDRIVER v4.02 - "FG_WAITVR" - ENABLE/DISABLE VERTICAL RETRACE WAIT

INT 62 u - FGDRIVER v4.02 - "FG_WAITVR" - ENABLE/DISABLE VERTICAL RETRACE WAIT
	AX = 00DFh
	BX = new state (0000h disabled, 0001h enabled)
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)

Top

6200E0 - INT 62 u - FGDRIVER v4.02 - "FG_WHERE" - GET CURRENT CURSOR POSITION

INT 62 u - FGDRIVER v4.02 - "FG_WHERE" - GET CURRENT CURSOR POSITION
	AX = 00E0h
	ES:BX -> variable pointers (see #03513)
Return: indicated variables filled with cursor row and column for active
	  display
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=0054h,AX=0058h,AX=006Bh,AX=007Eh

Format of FGDRIVER variable pointers:
Offset	Size	Description	(Table 03513)
 00h	WORD	segment of WORD buffer for cursor row
 02h	WORD	offset of WORD buffer for cursor row
 04h	WORD	segment WORD buffer for cursor column
 06h	WORD	offset WORD buffer for cursor column

Top

6200E1 - INT 62 u - FGDRIVER v4.02 - "FG_XALPHA" - CONVERT SCREEN COLUMN TO CHAR COLUMN

INT 62 u - FGDRIVER v4.02 - "FG_XALPHA" - CONVERT SCREEN COLUMN TO CHAR COLUMN
	AX = 00E1h
	BX = screen space column
Return: AX = character space column containing specified coordinate
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00E2h,AX=00E4h

Top

6200E2 - INT 62 u - FGDRIVER v4.02 - "FG_XCONVERT" - CONVERT CHAR COLUMN TO SCREEN COL

INT 62 u - FGDRIVER v4.02 - "FG_XCONVERT" - CONVERT CHAR COLUMN TO SCREEN COL
	AX = 00E2h
	BX = character space column
Return: AX = screen space column of leftmost pixel in specified character col
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00E2h,AX=00E5h

Top

6200E3 - INT 62 u - FGDRIVER v4.02 - "FG_XVIEW" - CONVERT VIEWPORT COORDINATE

INT 62 u - FGDRIVER v4.02 - "FG_XVIEW" - CONVERT VIEWPORT COORDINATE
	AX = 00E3h
	BX = horizontal viewport coordinate
Return: AX = screen space X coordinate corresponding to supplied coordinate
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	if no viewport has been defined, the returned coordinate will be the
	  same as the viewport coordinate
SeeAlso: AX=00E2h,AX=00E6h

Top

6200E4 - INT 62 u - FGDRIVER v4.02 - "FG_YALPHA" - CONVERT SCREEN ROW TO CHARACTER ROW

INT 62 u - FGDRIVER v4.02 - "FG_YALPHA" - CONVERT SCREEN ROW TO CHARACTER ROW
	AX = 00E4h
	BX = screen space row
Return: AX = character space row containing specified coordinate
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00E1h,AX=00E5h

Top

6200E5 - INT 62 u - FGDRIVER v4.02 - "FG_YCONVERT" - CONVERT CHARACTER ROW TO SCREEN ROW

INT 62 u - FGDRIVER v4.02 - "FG_YCONVERT" - CONVERT CHARACTER ROW TO SCREEN ROW
	AX = 00E5h
	BX = character space row
Return: AX = screen space row of topmost pixel in specified character row
Note:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
SeeAlso: AX=00E2h,AX=00E4h,AX=00E6h

Top

6200E6 - INT 62 u - FGDRIVER v4.02 - "FG_YVIEW" - TRANSLATE VERTICAL VIEWPORT COORDINATE

INT 62 u - FGDRIVER v4.02 - "FG_YVIEW" - TRANSLATE VERTICAL VIEWPORT COORDINATE
	AX = 00E6h
	BX = viewport Y coordinate
Return: AX = screen space row for viewport coordinate
Program: FGDRIVER is the external video driver for the shareware
	  Fastgraph/Light by Ted Gruber Software
Notes:	the FGDRIVER functions are rearranged with each major release, but
	  their parameters do not change (see #03474 at AX=0000h)
	if no viewport has been defined, the returned coordinate will be the
	  same as the viewport coordinate
SeeAlso: AX=00E3h,AX=00E5h

Top

6201 - INT 62 - Cswitch - GIVE UP REST OF TIME-SLICE

INT 62 - Cswitch - GIVE UP REST OF TIME-SLICE
	AH = 01h
Program: Cswitch is a set of multitasking functions by Herb Rose
SeeAlso: AH=05h"Cswitch",AH=06h"Cswitch",INT 15/AX=1000h,INT 2F/AX=1680h

Top

6201 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - NOP for ETHDEV.ODI

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - NOP for ETHDEV.ODI
	AH = 01h
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6202 - INT 62 - Cswitch - WAIT FOR SEMAPHORE

INT 62 - Cswitch - WAIT FOR SEMAPHORE
	AH = 02h
	DX = semaphore number (0-63)
Return: AX = FFFFh bad semaphore number
	     else  success
SeeAlso: AH=03h"Cswitch",AH=04h"Cswitch"

Top

6202 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - INITIALIZE

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - INITIALIZE
	AH = 02h
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=00h"ETHDEV",AH=03h"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h"BW-TCP",INT 64/AH=01h"BW-NFS"

Top

6203 - INT 62 - Cswitch - CHECK SEMAPHORE

INT 62 - Cswitch - CHECK SEMAPHORE
	AH = 03h
	DX = semaphore number (0-63)
Return: AX = status
	    FFFFh not owned
	    else  owned
SeeAlso: AH=02h,AH=04h

Top

6203 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET REAL IP ADDRESS

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET REAL IP ADDRESS
	AH = 03h
	DS:SI -> DWORD buffer for IP address
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6204 - INT 62 - Cswitch - TRIGGER SEMAPHORE

INT 62 - Cswitch - TRIGGER SEMAPHORE
	AH = 04h
	DX = semaphore number (0-63)
Return: AX = status
	    FFFFh bad semaphore number
	    else  success
SeeAlso: AH=02h"Cswitch",AH=03h"Cswitch"

Top

6204 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - SET ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - SET ???
	AH = 04h
	BX = ???
	ES:SI -> FAR routine for ???
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6205 - INT 62 - Cswitch - SLEEP

INT 62 - Cswitch - SLEEP
	AH = 05h
	BX = seconds to sleep
SeeAlso: AH=01h"Cswitch",AH=06h"Cswitch",AH=08h"Cswitch"

Top

6205 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 05h
	???
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6206 - INT 62 - Cswitch - SUSPEND

INT 62 - Cswitch - SUSPEND
	AH = 06h
SeeAlso: AH=05h"Cswitch",AH=08h"Cswitch"

Top

6206 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 06h
	???
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6207 - INT 62 - Cswitch - SPAWN

INT 62 - Cswitch - SPAWN
	AH = 07h
	ES:BX -> function address to start executing at
	CX = priority (1-10)
Return: AX = result/status
	    FFFDh  no free memory control blocks
	    FFFEh  no free task control blocks
	    FFFFh  not enough memory to create new task stack
	    >0	   the tcb number of the new task, indicating no error
SeeAlso: AH=0Fh"Cswitch",AH=10h"Cswitch"

Top

6207 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 07h
	DS:SI -> ???
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6208 - INT 62 - Cswitch - WAKE UP TASK

INT 62 - Cswitch - WAKE UP TASK
	AH = 08h
	BX = tcb identifier
SeeAlso: AH=05h,AH=06h

Top

6208 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 08h
	CX = ???
	ES:SI -> ??? buffer (see #03514)
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Format of BW-TCP ??? buffer:
Offset	Size	Description	(Table 03514)
 00h  6 BYTEs	hardware address???
 06h  6 BYTEs	???
 0Ch	WORD	???
 0Eh	WORD	???

Top

6208--CXFFFE - INT 62 - MS SQL Server/Sybase DBLIBRARY interface - UNINSTALL/GET PSP ADDR

INT 62 - MS SQL Server/Sybase DBLIBRARY interface - UNINSTALL/GET PSP ADDR
	AH = 08h
	CX = FFFEh
	DX = FFFFh
Return: AX = PSP address of resident DBLIBRARY
Note:	this call does not free the memory allocated to the TSR; the calling
	  code must do the deallocation.
SeeAlso: INT 62"DBLIBRARY"

Top

6209 - INT 62 - Cswitch - SET PRIORITY

INT 62 - Cswitch - SET PRIORITY
	AH = 09h
	BX = new base priority (1-10)
Note:	the lower the priority is numerically, the more often the task will run

Top

6209 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - HOOK TIMER INTERRUPT

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - HOOK TIMER INTERRUPT
	AH = 09h
Return: CF clear if successful
	    AX = handler ID
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=0Ah"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

620A - INT 62 - Cswitch - TEST MESSAGE QUEUE

INT 62 - Cswitch - TEST MESSAGE QUEUE
	AH = 0Ah
	DX = queue number (0-63)
Return: AX = result/message size
	    0000h nothing on queue
	    FFFFh bad queue number
	    else  number of bytes in first message in queue
SeeAlso: AH=0Bh"Cswitch",AH=0Ch"Cswitch"

Top

620A - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - UNHOOK TIMER INTERRUPT

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - UNHOOK TIMER INTERRUPT
	AH = 0Ah
	DX = handler ID
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=09h"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

620B - INT 62 - Cswitch - SEND MESSAGE

INT 62 - Cswitch - SEND MESSAGE
	AH = 0Bh
	CX = number of bytes to write
	DS:SI -> buffer
	DX = queue number (0-63)
Return: AX = result/message size
	    0000h no message was on queue
	    FFFEh triggered by something arriving, redo the call
	    FFFFh bad queue number
	    else  number of bytes in message
SeeAlso: AH=0Ah"Cswitch",AH=0Ch"Cswitch"

Top

620B - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ADD ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ADD ???
	AH = 0Bh
	AL = ???
	DX = ???
	BP = ???
	ES:SI -> ???
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=0Ch"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

620C - INT 62 - Cswitch - READ MESSAGE

INT 62 - Cswitch - READ MESSAGE
	AH = 0Ch
	CX = number of bytes to read
	DS:SI -> buffer
	DX = queue number (0-63)
Return: AX = status
	    FFFFh bad queue number
	    else  number of bytes transferred
SeeAlso: AH=0Ah,AH=0Bh

Top

620C - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - REMOVE ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - REMOVE ???
	AH = 0Ch
	DX = ???
	BP = ???
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=0Bh"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

620D - INT 62 - Cswitch - DON'T ALLOW TASK TO BE SWAPPED OUT

INT 62 - Cswitch - DON'T ALLOW TASK TO BE SWAPPED OUT
	AH = 0Dh
SeeAlso: AH=0Eh"Cswitch"

Top

620D - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - NOP for ETHDEV.ODI

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - NOP for ETHDEV.ODI
	AH = 0Dh
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

620E - INT 62 - Cswitch - ALLOW TASK TO BE SWAPPED OUT

INT 62 - Cswitch - ALLOW TASK TO BE SWAPPED OUT
	AH = 0Eh
SeeAlso: AH=0Dh"Cswitch"

Top

620E - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - BEGIN CRITICAL SECTION

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - BEGIN CRITICAL SECTION
	AH = 0Eh
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=0Fh"ETHDEV",AH=10h"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h"BW-TCP",INT 64/AH=01h"BW-NFS"

Top

620F - INT 62 - Cswitch - LOAD AND RUN PROGRAM FROM DISK

INT 62 - Cswitch - LOAD AND RUN PROGRAM FROM DISK
	AH = 0Fh
	ES:BX -> command line
	CX = priority (1-10)
	DX = background flag (nonzero allows loading to EMS)
Return: AX = status
	    0000h task loader queue is full
	    0001h  no error
SeeAlso: AH=07h"Cswitch",AH=10h"Cswitch",AH=13h"Cswitch"

Top

620F - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - END CRITICAL SECTION

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - END CRITICAL SECTION
	AH = 0Fh
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=0Eh"ETHDEV",AH=10h"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h"BW-TCP",INT 64/AH=01h"BW-NFS"

Top

6210 - INT 62 - Cswitch - TERMINATE SPAWNED PROGRAM

INT 62 - Cswitch - TERMINATE SPAWNED PROGRAM
	AH = 10h
SeeAlso: AH=07h"Cswitch",AH=0Fh"Cswitch"

Top

6210 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - QUERY CRITICAL SECTION

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - QUERY CRITICAL SECTION
	AH = 10h
Return: CF clear if no critical section active
	CF set if in critical section
SeeAlso: AH=0Eh"ETHDEV",AH=0Fh"ETHDEV",AH=FEh,INT 21/AH=3Fh"BW-TCP"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h"BW-TCP",INT 64/AH=01h"BW-NFS"

Top

6211 - INT 62 - Cswitch - GET TCB INFORMATION

INT 62 - Cswitch - GET TCB INFORMATION
	AH = 11h
	ES:BX -> a pointer which will be set to the tcb address
Return: AX = tcb indentifier
SeeAlso: AH=12h

Top

6211 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - SET ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - SET ???
	AH = 11h
	ES:SI -> ???
Return: CF clear
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6212 - INT 62 - Cswitch - GET TCB ADDRESS

INT 62 - Cswitch - GET TCB ADDRESS
	AH = 12h
	ES:BX -> a pointer which will be set to the tcb table address
Return: AX = tcb indentifier
SeeAlso: AH=11h"Cswitch"

Top

6212 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET SOCKET NUMBER???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET SOCKET NUMBER???
	AH = 12h
Return: CF clear if successful
	    AX = socket number??? (memory variable incremented after reading)
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Note:	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6213 - INT 62 - Cswitch - CHECK STATUS OF PREVIOUS LOAD_TASK

INT 62 - Cswitch - CHECK STATUS OF PREVIOUS LOAD_TASK
	AH = 13h
Return: AX = result
	    FFFCh no Memory Control Blocks available
	    FFFDh no TCBs available
	    FFFEh insufficient memory
	    FFFFh cannot open file
	    0000h load in progress (not done yet)
	    else  tcb indentifier
SeeAlso: AH=0Fh

Top

6213 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 13h
	CX = ???
Return: CF clear if successful
	    AL = 00h
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6214 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 14h
	ES:SI -> ???
Return: CF clear if successful
	    AL = 00h
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6215 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - GET ???
	AH = 15h
Return: CF clear if successful
	    AX = ??? (destroyed???)
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Notes:	call this function after reading the "ETHDEV27" device
	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
INT 64/AH=01h"BW-NFS"

Top

6216 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 16h
	???
Return: CF clear if successful
	CF set on error
	    AL = error code
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6217 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ???
	AH = 17h
	DX = segment of ???
Return: CF clear
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=24h"BW-TCP"
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6218 - INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ALLOCATE AND MAP EMS FOR DRIVER

INT 62 - BW-TCP - HW DRIVER (ETHDEV.SYS) - ALLOCATE AND MAP EMS FOR DRIVER
	AH = 18h
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Notes:	calls function 17h after EMS allocated and mapped
	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: AH=FEh,INT 21/AH=3Fh"BW-TCP",INT 63/AH=03h"BW-TCP",INT 63/AH=24h
SeeAlso: INT 64/AH=01h"BW-NFS"

Top

6247 - INT 62 - PC Tools v7 COMMUTE - ???

INT 62 - PC Tools v7 COMMUTE - ???
	AH = 47h
	AL = subfunction (00h-31h)
	???
	CF set
Return: ???
Program: COMMUTE is a remote-control program bundled with Central Point
	  Software's PC Tools

Top

6248 - INT 62 - PC Tools v7 COMMUTE - ???

INT 62 - PC Tools v7 COMMUTE - ???
	AH = 48h
	AL = ???
	???
	CF set
Return: ???

Top

6249 - INT 62 - PC Tools v7 COMMUTE - ???

INT 62 - PC Tools v7 COMMUTE - ???
	AH = 49h
	???
	CF set
Return: ???
Note:	may be the same as AH=4Ch

Top

624A - INT 62 - PC Tools v7 COMMUTE - ???

INT 62 - PC Tools v7 COMMUTE - ???
	AH = 4Ah
	AL = subfunction (00h-46h)
	???
	CF set
Return: ???

Top

624B--BX1234 - INT 62 - PC Tools v7 COMMUTE - ???

INT 62 - PC Tools v7 COMMUTE - ???
	AH = 4Bh
	BX = 1234h
	CX = 1234h
	ES = ???
	CF set
Return: ???
Program: COMMUTE is a remote-control program bundled with Central Point
	  Software's PC Tools

Top

624C - INT 62 - PC Tools v7 COMMUTE - ???

INT 62 - PC Tools v7 COMMUTE - ???
	AH = 4Ch
	BL = subfunction
	    00h ???
	    02h ???
Return: CF clear if successful
	CF set on error

Top

626262 - INT 62 - PC Tools v7 COMMUTE - INSTALLATION CHECK

INT 62 - PC Tools v7 COMMUTE - INSTALLATION CHECK
	AX = 6262h
	CF set
Return: AX = 0000h
	BX = segment of resident code's PSP
Program: COMMUTE is a remote-control program bundled with Central Point
	  Software's PC Tools

Top

62C0 - INT 62 U - GWBTSR - API

INT 62 U - GWBTSR - API
	AH = C0h
	AL = function
	    00h installation check
		Return: AX = 00FFh if installed
	    01h ???
Program: GWBTSR is a huge (48K) resident mixer controller for the Gateway 2000
	  sound card (OEM version of Aztech Sound Galaxy)
Index:	installation check;GWBTSR

Top

62FE - INT 62 - BW-TCP - ETHDRV.SYS - MAP EMS PAGE FRAME

INT 62 - BW-TCP - ETHDRV.SYS - MAP EMS PAGE FRAME
	AH = FEh
	AL = direction
	    00h map in driver's memory block
	    01h map out driver's memory block
Return: CF clear if successful
	CF set on error
	    AL = error code
Range:	INT 4C to INT FB, selected by configuration
Notes:	this function is supported by at least the SLIP and ODI versions of
	  ETHDEV.SYS
	the Beame&Whiteside TCP/IP protocol stack uses two consecutive
	  interrupts (62h and 63h by default); the BW-NFS client uses a third
	  consecutive interrupt (64h by default) if it is loaded
SeeAlso: INT 21/AH=3Fh"BW-TCP",INT 62/AH=00h"ETHDEV",INT 62/AH=18h"ETHDEV"
SeeAlso: INT 63/AH=03h"BW-TCP",INT 63/AH=24h,INT 64/AH=FEh

Top

Home Interrupt Index: by Category by Number TOC: by Order Top